From: Netanel Belgazal <neta...@amazon.com>
Fixing a bug that the driver does not unmask the IO interrupts
in ndo_open():
occasionally, the MSI-X interrupt (for one or more IO queues)
can be masked when ndo_close() was called.
If that is followed by ndo open(),
then the MSI-X will be still masked so no interrupt
will be received by the driver.
Signed-off-by: Netanel Belgazal <neta...@amazon.com>
---
drivers/net/ethernet/amazon/ena/ena_netdev.c | 41 ++++++++++++++++++----------
1 file changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c
b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 7c1214d..0e3c60c7 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1078,6 +1078,26 @@ inline void ena_adjust_intr_moderation(struct ena_ring
*rx_ring,
rx_ring->per_napi_bytes = 0;
}
+static inline void ena_unmask_interrupt(struct ena_ring *tx_ring,
+ struct ena_ring *rx_ring)
+{
+ struct ena_eth_io_intr_reg intr_reg;
+
+ /* Update intr register: rx intr delay,
+ * tx intr delay and interrupt unmask
+ */
+ ena_com_update_intr_reg(&intr_reg,
+ rx_ring->smoothed_interval,
+ tx_ring->smoothed_interval,
+ true);
+
+ /* It is a shared MSI-X.
+ * Tx and Rx CQ have pointer to it.
+ * So we use one of them to reach the intr reg
+ */
+ ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg);
+}
+
static inline void ena_update_ring_numa_node(struct ena_ring *tx_ring,
struct ena_ring *rx_ring)
{
@@ -1108,7 +1128,6 @@ static int ena_io_poll(struct napi_struct *napi, int
budget)
{
struct ena_napi *ena_napi = container_of(napi, struct ena_napi, napi);
struct ena_ring *tx_ring, *rx_ring;
- struct ena_eth_io_intr_reg intr_reg;
u32 tx_work_done;
u32 rx_work_done;
@@ -1149,22 +1168,9 @@ static int ena_io_poll(struct napi_struct *napi, int
budget)
if
(ena_com_get_adaptive_moderation_enabled(rx_ring->ena_dev))
ena_adjust_intr_moderation(rx_ring, tx_ring);
- /* Update intr register: rx intr delay,
- * tx intr delay and interrupt unmask
- */
- ena_com_update_intr_reg(&intr_reg,
- rx_ring->smoothed_interval,
- tx_ring->smoothed_interval,
- true);
-
- /* It is a shared MSI-X.
- * Tx and Rx CQ have pointer to it.
- * So we use one of them to reach the intr reg
- */
- ena_com_unmask_intr(rx_ring->ena_com_io_cq, &intr_reg);
+ ena_unmask_interrupt(tx_ring, rx_ring);
}
-
ena_update_ring_numa_node(tx_ring, rx_ring);
ret = rx_work_done;
@@ -1485,6 +1491,11 @@ static int ena_up_complete(struct ena_adapter *adapter)
ena_napi_enable_all(adapter);
+ /* Enable completion queues interrupt */
+ for (i = 0; i < adapter->num_queues; i++)
+ ena_unmask_interrupt(&adapter->tx_ring[i],
+ &adapter->rx_ring[i]);
+
/* schedule napi in case we had pending packets
* from the last time we disable napi
*/
--
2.7.4
