hi, Florian On 2017/6/20 5:00, Florian Fainelli wrote: > On 06/16/2017 02:24 AM, Lin Yun Sheng wrote: >> This patch fixes the phy loopback self_test failed issue. when >> Marvell Phy Module is loaded, it will powerdown fiber when doing >> phy loopback self test, which cause phy loopback self_test fail. >> >> Signed-off-by: Lin Yun Sheng <linyunsh...@huawei.com> >> --- >> drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 ++++++++++++++-- >> 1 file changed, 14 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c >> b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c >> index b8fab14..e95795b 100644 >> --- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c >> +++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c >> @@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct >> phy_device *phy_dev, u8 en) > > The question really is, why is not this properly integrated into the PHY > driver and PHYLIB such that the only thing the Ethernet MAC driver has > to call is a function of the PHY driver putting it in self-test? Do you meaning calling phy_dev->drv->resume and phy_dev->drv->suspend function? I tried it, but it failed. if that is what you mean, I will look into it why it fail.
Thanks for your reply. Best regards YunSheng Lin > >> >> /* Force 1000M Link, Default is 0x0200 */ >> phy_write(phy_dev, 7, 0x20C); >> - phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); >> >> - /* Enable PHY loop-back */ >> + /* Powerup Fiber */ >> + phy_write(phy_dev, HNS_PHY_PAGE_REG, 1); >> + val = phy_read(phy_dev, COPPER_CONTROL_REG); >> + val &= ~PHY_POWER_DOWN; >> + phy_write(phy_dev, COPPER_CONTROL_REG, val); >> + >> + /* Enable Phy Loopback */ >> + phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); >> val = phy_read(phy_dev, COPPER_CONTROL_REG); >> val |= PHY_LOOP_BACK; >> val &= ~PHY_POWER_DOWN; >> @@ -299,6 +305,12 @@ static int hns_nic_config_phy_loopback(struct >> phy_device *phy_dev, u8 en) >> phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA); >> phy_write(phy_dev, 1, 0x400); >> phy_write(phy_dev, 7, 0x200); >> + >> + phy_write(phy_dev, HNS_PHY_PAGE_REG, 1); >> + val = phy_read(phy_dev, COPPER_CONTROL_REG); >> + val |= PHY_POWER_DOWN; >> + phy_write(phy_dev, COPPER_CONTROL_REG, val); >> + >> phy_write(phy_dev, HNS_PHY_PAGE_REG, 0); >> phy_write(phy_dev, 9, 0xF00); >> >> > >