On emulation systems, the EMAC's internal PHY ("SGMII") is not present, but is not needed for network functionality. So just display a warning message and ignore the SGMII.
Tested-by: Philip Elcan <pel...@codeaurora.org> Tested-by: Adam Wallis <awal...@codeaurora.org> Signed-off-by: Timur Tabi <ti...@codeaurora.org> --- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index 18c184e..29ba37a 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -297,6 +297,14 @@ static int emac_sgmii_acpi_match(struct device *dev, void *data) {} }; +/* Dummy function for systems without an internal PHY. This avoids having + * to check for NULL pointers before calling the functions. + */ +static int emac_sgmii_dummy(struct emac_adapter *adpt) +{ + return 0; +} + int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) { struct platform_device *sgmii_pdev = NULL; @@ -311,8 +319,19 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) emac_sgmii_acpi_match); if (!dev) { - dev_err(&pdev->dev, "cannot find internal phy node\n"); - return -ENODEV; + dev_warn(&pdev->dev, "cannot find internal phy node\n"); + /* There is typically no internal PHY on emulation + * systems, so if we can't find the node, assume + * we are on an emulation system and stub-out + * support for the internal PHY. These systems only + * use ACPI. + */ + phy->open = emac_sgmii_dummy; + phy->close = emac_sgmii_dummy; + phy->link_up = emac_sgmii_dummy; + phy->link_down = emac_sgmii_dummy; + + return 0; } sgmii_pdev = to_platform_device(dev); -- Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.