* Francois Romieu <[EMAIL PROTECTED]> [2006-08-03 17:05]:
> > >From 192.168.1.2 icmp_seq=62 Destination Host Unreachable
> > >From 192.168.1.2 icmp_seq=63 Destination Host Unreachable
> > NETDEV WATCHDOG: eth0: transmit timed out
> > CmdTxEnb: 0x4
> > CmdTxEnb: 0x8
> > ChipCmd (before): 0x0
> > ChipCmd (after): 0xc
> > trying again...
> > ChipCmd: 0xc
> > >From 192.168.1.2 icmp_seq=64 Destination Host Unreachable
> > >From 192.168.1.2 icmp_seq=65 Destination Host Unreachable
> > >From 192.168.1.2 icmp_seq=66 Destination Host Unreachable
>
> Did you take the dump right after 'ifconfig ... up' ? Otherwise, the
> watchdog may quickly come into play.
Oh, yes, when I do
ifup eth0 ; ethtool -d eth0
I get better results.
RealTek RTL-8110 registers:
------------------------------
0x00: MAC Address 00:14:fd:10:27:74
0x08: Multicast Address Filter 0x00000000 0x00000000
0x10: Dump Tally Counter Command 0xdfbbfac0 0xff74b67b
0x20: Tx Normal Priority Ring Addr 0x00000000 0x00000000
0x28: Tx High Priority Ring Addr 0xeffc2b00 0x7ef5f6ac
0x30: Flash memory read/write 0x00000000
0x34: Early Rx Byte Count 0
0x36: Early Rx Status 0x00
0x37: Command 0x0c
Rx on, Tx on
0x3C: Interrupt Mask 0x807f
SERR RxFIFO LinkChg RxNoBuf TxErr TxOK RxErr RxOK
0x3E: Interrupt Status 0x0000
0x40: Tx Configuration 0x13000600
0x44: Rx Configuration 0x0000e60e
0x48: Timer count 0x00630fd8
0x4C: Missed packet counter 0x000000
0x50: EEPROM Command 0x00
0x51: Config 0 0x04
0x52: Config 1 0x1f
0x53: Config 2 0x10
0x54: Config 3 0x20
0x55: Config 4 0x80
0x56: Config 5 0x01
0x58: Timer interrupt 0x00000000
0x5C: Multiple Interrupt Select 0x0000
0x60: PHY access 0x80001000
0x64: TBI control and status 0x00000000
0x68: TBI Autonegotiation advertisement (ANAR) 0x0000
0x6A: TBI Link partner ability (LPAR) 0x0000
0x6C: PHY status 0x0b
0x84: PM wakeup frame 0 0xbcfe6f7f 0xdffffe8f
0x8C: PM wakeup frame 1 0xabf6cb3f 0xff7bdbbd
0x94: PM wakeup frame 2 (low) 0xdfbaeed7 0xbdbfbffd
0x9C: PM wakeup frame 2 (high) 0xaa75befc 0xcb5feab9
0xA4: PM wakeup frame 3 (low) 0xbbdf67df 0xff7e65b3
0xAC: PM wakeup frame 3 (high) 0xbbdffbb1 0xff7c7fff
0xB4: PM wakeup frame 4 (low) 0x7f3bde9f 0x3bbffa7d
0xBC: PM wakeup frame 4 (high) 0x2e9ffdcd 0x36c8bbff
0xC4: Wakeup frame 0 CRC 0x9abf
0xC6: Wakeup frame 1 CRC 0xffbf
0xC8: Wakeup frame 2 CRC 0xaebf
0xCA: Wakeup frame 3 CRC 0x2ffe
0xCC: Wakeup frame 4 CRC 0xdc23
0xDA: RX packet maximum size 0x3fff
0xE0: C+ Command 0x2028
RX checksumming
PCI Multiple RW
0xE2: Interrupt Mitigation 0x0000
TxTimer: 0
TxPackets: 0
RxTimer: 0
RxPackets: 0
0xE4: Rx Ring Addr 0x06ff1000 0x00000000
0xEC: Early Tx threshold 0x3f
--
Martin Michlmayr
http://www.cyrius.com/
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
