From: Roopa Prabhu <ro...@cumulusnetworks.com>
Forward Error Correction (FEC) modes i.e Base-R
and Reed-Solomon modes are introduced in 25G/40G/100G standards
for providing good BER at high speeds. Various networking devices
which support 25G/40G/100G provides ability to manage supported FEC
modes and the lack of FEC encoding control and reporting today is a
source for interoperability issues for many vendors.
FEC capability as well as specific FEC mode i.e. Base-R
or RS modes can be requested or advertised through bits D44:47 of base link
codeword.
This patch set intends to provide option under ethtool to manage and
report FEC encoding settings for networking devices as per IEEE 802.3
bj, bm and by specs.
v2 :
- minor patch format fixes and typos pointed out by Andrew
- there was a pending discussion on the use of 'auto' vs
'automatic' for fec settings. I have left it as 'auto'
because in most cases today auto is used in place of
automatic to represent automatically generated values.
We use it in other networking config too. I would prefer
leaving it as auto.
Casey Leedom (2):
cxgb4: core hardware/firmware support for Forward Error Correction on
a link
cxgb4: ethtool forward error correction management support
Vidya Sagar Ravipati (1):
net: ethtool: add support for forward error correction modes
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 99 ++++++++++++++
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 151 ++++++++++++++++-----
include/linux/ethtool.h | 4 +
include/uapi/linux/ethtool.h | 48 ++++++-
net/core/ethtool.c | 34 +++++
5 files changed, 300 insertions(+), 36 deletions(-)
--
2.1.4
