Hi all,

Today's linux-next merge of the net-next tree got a conflict in:

  arch/arm64/boot/dts/rockchip/rk3328-evb.dts

between commit:

  0e54e062692a ("arm64: dts: rockchip: add mmc nodes for rk3328 evaluation 
board")
  57fca160b2be ("arm64: dts: rockchip: add cpu regulator for rk3328 evaluation 
board")

from the rockchip tree and commit:

  4b05bc6157eb ("ARM64: dts: rockchip: Enable gmac2phy for rk3328-evb")

from the net-next tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index f82b2d0d9e86,b9f36dad17e6..000000000000
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@@ -51,217 -51,24 +51,234 @@@
                stdout-path = "serial2:1500000n8";
        };
  
 +      dc_12v: dc-12v {
 +              compatible = "regulator-fixed";
 +              regulator-name = "dc_12v";
 +              regulator-always-on;
 +              regulator-boot-on;
 +              regulator-min-microvolt = <12000000>;
 +              regulator-max-microvolt = <12000000>;
 +      };
 +
 +      sdio_pwrseq: sdio-pwrseq {
 +              compatible = "mmc-pwrseq-simple";
 +              pinctrl-names = "default";
 +              pinctrl-0 = <&wifi_enable_h>;
 +
 +              /*
 +               * On the module itself this is one of these (depending
 +               * on the actual card populated):
 +               * - SDIO_RESET_L_WL_REG_ON
 +               * - PDN (power down when low)
 +               */
 +              reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 +      };
 +
+       vcc_phy: vcc-phy-regulator {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc_phy";
+               regulator-always-on;
+               regulator-boot-on;
+       };
++
 +      vcc_sys: vcc-sys {
 +              compatible = "regulator-fixed";
 +              regulator-name = "vcc_sys";
 +              regulator-always-on;
 +              regulator-boot-on;
 +              regulator-min-microvolt = <5000000>;
 +              regulator-max-microvolt = <5000000>;
 +              vin-supply = <&dc_12v>;
 +      };
 +
 +      vcc_sd: sdmmc-regulator {
 +              compatible = "regulator-fixed";
 +              gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
 +              pinctrl-names = "default";
 +              pinctrl-0 = <&sdmmc0m1_gpio>;
 +              regulator-name = "vcc_sd";
 +              regulator-min-microvolt = <3300000>;
 +              regulator-max-microvolt = <3300000>;
 +              vin-supply = <&vcc_io>;
 +      };
 +};
 +
 +&cpu0 {
 +      cpu-supply = <&vdd_arm>;
 +};
 +
 +&emmc {
 +      bus-width = <8>;
 +      cap-mmc-highspeed;
 +      non-removable;
 +      pinctrl-names = "default";
 +      pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 +      status = "okay";
  };
  
+ &gmac2phy {
+       phy-supply = <&vcc_phy>;
+       clock_in_out = "output";
+       assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
+       assigned-clock-rate = <50000000>;
+       assigned-clocks = <&cru SCLK_MAC2PHY>;
+       assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+       status = "okay";
+ };
+ 
 +&i2c1 {
 +      status = "okay";
 +
 +      rk805: rk805@18 {
 +              compatible = "rockchip,rk805";
 +              reg = <0x18>;
 +              interrupt-parent = <&gpio2>;
 +              interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 +              #clock-cells = <1>;
 +              clock-output-names = "xin32k", "rk805-clkout2";
 +              gpio-controller;
 +              #gpio-cells = <2>;
 +              pinctrl-names = "default";
 +              pinctrl-0 = <&pmic_int_l>;
 +              rockchip,system-power-controller;
 +              wakeup-source;
 +
 +              vcc1-supply = <&vcc_sys>;
 +              vcc2-supply = <&vcc_sys>;
 +              vcc3-supply = <&vcc_sys>;
 +              vcc4-supply = <&vcc_sys>;
 +              vcc5-supply = <&vcc_io>;
 +              vcc6-supply = <&vcc_io>;
 +
 +              regulators {
 +                      vdd_logic: DCDC_REG1 {
 +                              regulator-name = "vdd_logic";
 +                              regulator-min-microvolt = <712500>;
 +                              regulator-max-microvolt = <1450000>;
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                                      regulator-suspend-microvolt = <1000000>;
 +                              };
 +                      };
 +
 +                      vdd_arm: DCDC_REG2 {
 +                              regulator-name = "vdd_arm";
 +                              regulator-min-microvolt = <712500>;
 +                              regulator-max-microvolt = <1450000>;
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                                      regulator-suspend-microvolt = <950000>;
 +                              };
 +                      };
 +
 +                      vcc_ddr: DCDC_REG3 {
 +                              regulator-name = "vcc_ddr";
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                              };
 +                      };
 +
 +                      vcc_io: DCDC_REG4 {
 +                              regulator-name = "vcc_io";
 +                              regulator-min-microvolt = <3300000>;
 +                              regulator-max-microvolt = <3300000>;
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                                      regulator-suspend-microvolt = <3300000>;
 +                              };
 +                      };
 +
 +                      vcc_18: LDO_REG1 {
 +                              regulator-name = "vcc_18";
 +                              regulator-min-microvolt = <1800000>;
 +                              regulator-max-microvolt = <1800000>;
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                                      regulator-suspend-microvolt = <1800000>;
 +                              };
 +                      };
 +
 +                      vcc18_emmc: LDO_REG2 {
 +                              regulator-name = "vcc18_emmc";
 +                              regulator-min-microvolt = <1800000>;
 +                              regulator-max-microvolt = <1800000>;
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                                      regulator-suspend-microvolt = <1800000>;
 +                              };
 +                      };
 +
 +                      vdd_10: LDO_REG3 {
 +                              regulator-name = "vdd_10";
 +                              regulator-min-microvolt = <1000000>;
 +                              regulator-max-microvolt = <1000000>;
 +                              regulator-always-on;
 +                              regulator-boot-on;
 +                              regulator-state-mem {
 +                                      regulator-on-in-suspend;
 +                                      regulator-suspend-microvolt = <1000000>;
 +                              };
 +                      };
 +              };
 +      };
 +};
 +
 +&pinctrl {
 +      pmic {
 +              pmic_int_l: pmic-int-l {
 +                      rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
 +              };
 +      };
 +
 +      sdio-pwrseq {
 +              wifi_enable_h: wifi-enable-h {
 +              rockchip,pins =
 +                      <1 18 RK_FUNC_GPIO &pcfg_pull_none>;
 +              };
 +      };
 +};
 +
 +&sdio {
 +      bus-width = <4>;
 +      cap-sd-highspeed;
 +      cap-sdio-irq;
 +      keep-power-in-suspend;
 +      max-frequency = <150000000>;
 +      mmc-pwrseq = <&sdio_pwrseq>;
 +      non-removable;
 +      pinctrl-names = "default";
 +      pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
 +      status = "okay";
 +};
 +
 +&sdmmc {
 +      bus-width = <4>;
 +      cap-mmc-highspeed;
 +      cap-sd-highspeed;
 +      disable-wp;
 +      max-frequency = <150000000>;
 +      pinctrl-names = "default";
 +      pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
 +      vmmc-supply = <&vcc_sd>;
 +      status = "okay";
 +};
 +
 +&tsadc {
 +      status = "okay";
 +};
 +
  &uart2 {
        status = "okay";
  };

Reply via email to