Hi all, This patch series extracts the parts of the patch set that are likely not to be controversial and actually bringing multi-queue support to DSA-created network devices.
With these patches, we can now use sch_multiq as documented under Documentation/networking/multique.txt and let applications dedice the switch port output queue they want to use. Currently only Broadcom tags utilize that information. Resending based on David's feedback regarding the patches not in patchwork. Changes in v2: - use a proper define for the number of TX queues in bcm_sf2.c (Andrew) Changes from RFC: - dropped the ability to configure RX queues since we don't do anything with those just yet - dropped the patches that dealt with binding the DSA slave network devices queues with their master network devices queues this will be worked on separately. Florian Fainelli (4): net: dsa: Allow switch drivers to indicate number of TX queues net: dsa: tag_brcm: Set output queue from skb queue mapping net: dsa: bcm_sf2: Advertise number of egress queues net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping drivers/net/dsa/bcm_sf2.c | 14 +++++++++++++- drivers/net/dsa/bcm_sf2_regs.h | 3 +++ include/net/dsa.h | 3 +++ net/dsa/slave.c | 8 ++++++-- net/dsa/tag_brcm.c | 3 ++- 5 files changed, 27 insertions(+), 4 deletions(-) -- 2.11.0
