[PATCH net-next v2 1/2] net: phy: realtek: rename RTL8211F_PAGE_SELECT to RTL821x_PAGE_SELECT

[Kunihiko Hayashi]

This renames the definition of page select register from
RTL8211F_PAGE_SELECT to RTL821x_PAGE_SELECT to use it across models.

Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com>
---
Changes since v1:
 - new patch in this series
---
 drivers/net/phy/realtek.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 9cbe645..99c3297 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -22,11 +22,11 @@
 #define RTL821x_INER           0x12
 #define RTL821x_INER_INIT      0x6400
 #define RTL821x_INSR           0x13
+#define RTL821x_PAGE_SELECT    0x1f
 #define RTL8211E_INER_LINK_STATUS 0x400
 
 #define RTL8211F_INER_LINK_STATUS 0x0010
 #define RTL8211F_INSR          0x1d
-#define RTL8211F_PAGE_SELECT   0x1f
 #define RTL8211F_TX_DELAY      0x100
 
 MODULE_DESCRIPTION("Realtek PHY driver");
@@ -46,10 +46,10 @@ static int rtl8211f_ack_interrupt(struct phy_device *phydev)
 {
        int err;
 
-       phy_write(phydev, RTL8211F_PAGE_SELECT, 0xa43);
+       phy_write(phydev, RTL821x_PAGE_SELECT, 0xa43);
        err = phy_read(phydev, RTL8211F_INSR);
        /* restore to default page 0 */
-       phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+       phy_write(phydev, RTL821x_PAGE_SELECT, 0x0);
 
        return (err < 0) ? err : 0;
 }
@@ -102,7 +102,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
        if (ret < 0)
                return ret;
 
-       phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
+       phy_write(phydev, RTL821x_PAGE_SELECT, 0xd08);
        reg = phy_read(phydev, 0x11);
 
        /* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
@@ -114,7 +114,7 @@ static int rtl8211f_config_init(struct phy_device *phydev)
 
        phy_write(phydev, 0x11, reg);
        /* restore to default page 0 */
-       phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+       phy_write(phydev, RTL821x_PAGE_SELECT, 0x0);
 
        return 0;
 }
-- 
2.7.4