On Thu, Sep 28, 2017 at 09:37:08AM +0200, Corentin Labbe wrote: > On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote: > > Hi Corentin > > > > > +Required properties for the mdio-mux node: > > > + - compatible = "mdio-mux" > > > > This is too generic. Please add a more specific compatible for this > > particular mux. You can keep "mdio-mux", since that is what the MDIO > > subsystem will look for. > > > > I will add allwinner,sun8i-h3-mdio-mux > > > > +Required properties of the integrated phy node: > > > - clocks: a phandle to the reference clock for the EPHY > > > - resets: a phandle to the reset control for the EPHY > > > +- phy-is-integrated > > > > So the last thing you said is that the mux is not the problem > > here. Something else is locking up. Did you discover what? > > > > I really would like phy-is-integrated to go away. > > > > I have found the problem: by enabling ephy clk/reset the timeout does not > occur anymore. > So we could remove phy-is-integrated by: > Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn() > But this means: > - getting internalphy node always by manually get internal_mdio/internal_phy > (and not by the given phyhandle) > - doing some unnecessary tasks (enable/scan/disable) when external_phy is > needed >
Hello I have get rid of phy-is-integrated, but mdio_mux_syscon_switch_fn need to enable/disable ephy clk/reset. And so access to internal PHY node. But current DT made this ugly: (need to find mdio-mux then internalmdio then internal PHY) Since MAC cannot reset/choose internal MDIO without ephy clk/rst, could we interpret this as thoses clk/rst must be set in emac node. This will simplify a lot the code. Regards
