Some of the error messages that are printed by the interrupt handlers
are poorly written. For example, many don't include a device prefix,
so there's no indication that they are EMAC errors.
Also use rate limiting for all messages that could be printed from
interrupt context.
Signed-off-by: Timur Tabi <ti...@codeaurora.org>
---
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 15 ++++++---------
drivers/net/ethernet/qualcomm/emac/emac.c | 8 ++++----
2 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
index 29ba37a08372..e8ab512ee7e3 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
@@ -68,10 +68,10 @@ static void emac_sgmii_link_init(struct emac_adapter *adpt)
writel(val, phy->base + EMAC_SGMII_PHY_AUTONEG_CFG2);
}
-static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits)
+static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u8 irq_bits)
{
struct emac_sgmii *phy = &adpt->phy;
- u32 status;
+ u8 status;
writel_relaxed(irq_bits, phy->base + EMAC_SGMII_PHY_INTERRUPT_CLEAR);
writel_relaxed(IRQ_GLOBAL_CLEAR, phy->base + EMAC_SGMII_PHY_IRQ_CMD);
@@ -86,9 +86,8 @@ static int emac_sgmii_irq_clear(struct emac_adapter *adpt,
u32 irq_bits)
EMAC_SGMII_PHY_INTERRUPT_STATUS,
status, !(status & irq_bits), 1,
SGMII_PHY_IRQ_CLR_WAIT_TIME)) {
- netdev_err(adpt->netdev,
- "error: failed clear SGMII irq: status:0x%x
bits:0x%x\n",
- status, irq_bits);
+ net_err_ratelimited("%s: failed to clear SGMII irq: status:0x%x
bits:0x%x\n",
+ adpt->netdev->name, status, irq_bits);
return -EIO;
}
@@ -109,7 +108,7 @@ static irqreturn_t emac_sgmii_interrupt(int irq, void *data)
{
struct emac_adapter *adpt = data;
struct emac_sgmii *phy = &adpt->phy;
- u32 status;
+ u8 status;
status = readl(phy->base + EMAC_SGMII_PHY_INTERRUPT_STATUS);
status &= SGMII_ISR_MASK;
@@ -139,10 +138,8 @@ static irqreturn_t emac_sgmii_interrupt(int irq, void
*data)
atomic_set(&phy->decode_error_count, 0);
}
- if (emac_sgmii_irq_clear(adpt, status)) {
- netdev_warn(adpt->netdev, "failed to clear SGMII interrupt\n");
+ if (emac_sgmii_irq_clear(adpt, status))
schedule_work(&adpt->work_thread);
- }
return IRQ_HANDLED;
}
diff --git a/drivers/net/ethernet/qualcomm/emac/emac.c
b/drivers/net/ethernet/qualcomm/emac/emac.c
index ee6f2d27502c..70c92b649b29 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac.c
@@ -148,9 +148,8 @@ static irqreturn_t emac_isr(int _irq, void *data)
goto exit;
if (status & ISR_ERROR) {
- netif_warn(adpt, intr, adpt->netdev,
- "warning: error irq status 0x%lx\n",
- status & ISR_ERROR);
+ net_err_ratelimited("%s: error interrupt 0x%lx\n",
+ adpt->netdev->name, status & ISR_ERROR);
/* reset MAC */
schedule_work(&adpt->work_thread);
}
@@ -169,7 +168,8 @@ static irqreturn_t emac_isr(int _irq, void *data)
emac_mac_tx_process(adpt, &adpt->tx_q);
if (status & ISR_OVER)
- net_warn_ratelimited("warning: TX/RX overflow\n");
+ net_warn_ratelimited("%s: TX/RX overflow interrupt\n",
+ adpt->netdev->name);
exit:
/* enable the interrupt */
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
