Advertise NETIF_F_GRO_HW and turn on TPA_MODE_GRO when NETIF_F_GRO_HW is set. Disable NETIF_F_GRO_HW in bnx2x_fix_features() if the MTU does not support TPA_MODE_GRO or GRO is not set. bnx2x_change_mtu() also needs to disable NETIF_F_GRO_HW if the MTU does not support it.
Original parameter disable_tpa will continue to disable LRO and GRO_HW. Preserve the original behavior of enabling LRO by default. User has to run ethtool -K to explicitly enable GRO_HW. Cc: Ariel Elior <ariel.el...@cavium.com> Cc: everest-linux...@cavium.com Signed-off-by: Michael Chan <michael.c...@broadcom.com> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 24 ++++++++++++------------ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 8 +++++--- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 4c739d5..01b7f2f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2482,8 +2482,7 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index) */ if (bp->dev->features & NETIF_F_LRO) fp->mode = TPA_MODE_LRO; - else if (bp->dev->features & NETIF_F_GRO && - bnx2x_mtu_allows_gro(bp->dev->mtu)) + else if (bp->dev->features & NETIF_F_GRO_HW) fp->mode = TPA_MODE_GRO; else fp->mode = TPA_MODE_DISABLED; @@ -4874,6 +4873,9 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu) */ dev->mtu = new_mtu; + if (!bnx2x_mtu_allows_gro(new_mtu)) + dev->features &= ~NETIF_F_GRO_HW; + if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg)) SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS); @@ -4903,10 +4905,13 @@ netdev_features_t bnx2x_fix_features(struct net_device *dev, } /* TPA requires Rx CSUM offloading */ - if (!(features & NETIF_F_RXCSUM)) { + if (!(features & NETIF_F_RXCSUM)) + features &= ~NETIF_F_LRO; + + if (!(features & NETIF_F_GRO) || !bnx2x_mtu_allows_gro(dev->mtu)) + features &= ~NETIF_F_GRO_HW; + if (features & NETIF_F_GRO_HW) features &= ~NETIF_F_LRO; - features &= ~NETIF_F_GRO; - } return features; } @@ -4933,13 +4938,8 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features) } } - /* if GRO is changed while LRO is enabled, don't force a reload */ - if ((changes & NETIF_F_GRO) && (features & NETIF_F_LRO)) - changes &= ~NETIF_F_GRO; - - /* if GRO is changed while HW TPA is off, don't force a reload */ - if ((changes & NETIF_F_GRO) && bp->disable_tpa) - changes &= ~NETIF_F_GRO; + /* Don't care about GRO changes */ + changes &= ~NETIF_F_GRO; if (changes) bnx2x_reload = true; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 91e2a75..4d06548 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12400,8 +12400,8 @@ static int bnx2x_init_bp(struct bnx2x *bp) /* Set TPA flags */ if (bp->disable_tpa) { - bp->dev->hw_features &= ~NETIF_F_LRO; - bp->dev->features &= ~NETIF_F_LRO; + bp->dev->hw_features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); + bp->dev->features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); } if (CHIP_IS_E1(bp)) @@ -13273,7 +13273,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | - NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | + NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO | NETIF_F_GRO_HW | NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX; if (!chip_is_e1x) { dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM | @@ -13309,6 +13309,8 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; dev->features |= NETIF_F_HIGHDMA; + if (dev->features & NETIF_F_LRO) + dev->features &= ~NETIF_F_GRO_HW; /* Add Loopback capability to the device */ dev->hw_features |= NETIF_F_LOOPBACK; -- 1.8.3.1