On 12/22/2017 02:31 PM, Faiz Abbas wrote:
> From: Franklin S Cooper Jr <fcoo...@ti.com>
> 
> Add support for PM Runtime which is the new way to handle managing clocks.
> However, to avoid breaking SoCs not using PM_RUNTIME leave the old clk
> management approach in place.

There is no PM_RUNTIME anymore since 464ed18ebdb6 ("PM: Eliminate
CONFIG_PM_RUNTIME")

Have a look at the discussion: https://patchwork.kernel.org/patch/9436507/ :

>> Well, I admit it would be nicer if drivers didn't have to worry about 
>> whether or not CONFIG_PM was enabled.  A slightly cleaner approach 
>> from the one outlined above would have the probe routine do this:
>> 
>>      my_power_up(dev);
>>      pm_runtime_set_active(dev);
>>      pm_runtime_get_noresume(dev);
>>      pm_runtime_enable(dev);

> PM_RUNTIME is required by OMAP based devices to handle clock management.
> Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
> to work with this driver.

Who will set the SET_RUNTIME_PM_OPS in this case?

> Signed-off-by: Franklin S Cooper Jr <fcoo...@ti.com>
> [nsek...@ti.com: handle pm_runtime_get_sync() failure, fix some bugs]
> Signed-off-by: Sekhar Nori <nsek...@ti.com>
> Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
> ---
>  drivers/net/can/m_can/m_can.c | 38 ++++++++++++++++++++++++++++++++++----
>  1 file changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index f72116e..53e764f 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -23,6 +23,7 @@
>  #include <linux/of.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/iopoll.h>
>  #include <linux/can/dev.h>
>  
> @@ -625,19 +626,33 @@ static int m_can_clk_start(struct m_can_priv *priv)
>  {
>       int err;
>  
> +     err = pm_runtime_get_sync(priv->device);
> +     if (err) {
> +             pm_runtime_put_noidle(priv->device);

Why do you call this in case of an error?

> +             return err;
> +     }
> +
>       err = clk_prepare_enable(priv->hclk);
>       if (err)
> -             return err;
> +             goto pm_runtime_put;
>  
>       err = clk_prepare_enable(priv->cclk);
>       if (err)
> -             clk_disable_unprepare(priv->hclk);
> +             goto disable_hclk;
>  
>       return err;
> +
> +disable_hclk:
> +     clk_disable_unprepare(priv->hclk);
> +pm_runtime_put:
> +     pm_runtime_put_sync(priv->device);
> +     return err;
>  }
>  
>  static void m_can_clk_stop(struct m_can_priv *priv)
>  {
> +     pm_runtime_put_sync(priv->device);
> +
>       clk_disable_unprepare(priv->cclk);
>       clk_disable_unprepare(priv->hclk);
>  }
> @@ -1577,13 +1592,20 @@ static int m_can_plat_probe(struct platform_device 
> *pdev)
>       /* Enable clocks. Necessary to read Core Release in order to determine
>        * M_CAN version
>        */
> +     pm_runtime_enable(&pdev->dev);
> +     ret = pm_runtime_get_sync(&pdev->dev);
> +     if (ret)  {
> +             pm_runtime_put_noidle(&pdev->dev);

Why do you call this in case of error?

> +             goto pm_runtime_fail;
> +     }
> +
>       ret = clk_prepare_enable(hclk);
>       if (ret)
> -             goto disable_hclk_ret;
> +             goto pm_runtime_put;
>  
>       ret = clk_prepare_enable(cclk);
>       if (ret)
> -             goto disable_cclk_ret;
> +             goto disable_hclk_ret;
>  
>       res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>       addr = devm_ioremap_resource(&pdev->dev, res);
> @@ -1666,6 +1688,11 @@ static int m_can_plat_probe(struct platform_device 
> *pdev)
>       clk_disable_unprepare(cclk);
>  disable_hclk_ret:
>       clk_disable_unprepare(hclk);
> +pm_runtime_put:
> +     pm_runtime_put_sync(&pdev->dev);
> +pm_runtime_fail:
> +     if (ret)
> +             pm_runtime_disable(&pdev->dev);
>  failed_ret:
>       return ret;
>  }
> @@ -1723,6 +1750,9 @@ static int m_can_plat_remove(struct platform_device 
> *pdev)
>       struct net_device *dev = platform_get_drvdata(pdev);
>  
>       unregister_m_can_dev(dev);
> +
> +     pm_runtime_disable(&pdev->dev);
> +
>       platform_set_drvdata(pdev, NULL);
>  
>       free_m_can_dev(dev);
> 

regards,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature

Reply via email to