From: Netanel Belgazal <neta...@amazon.com>
Under certain conditions MSI-X interrupt might arrive right after it
was unmasked in ena_up(). There is a chance it would be processed by
the driver before device ENA_FLAG_DEV_UP flag is set. In such a case
the interrupt is ignored.
ENA device operates in auto-masked mode, therefore ignoring
interrupt leaves it masked for good.
Moving unmask of interrupt to be the last step in ena_up().
Signed-off-by: Netanel Belgazal <neta...@amazon.com>
---
drivers/net/ethernet/amazon/ena/ena_netdev.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c
b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 97c5a89a9cf7..6fb28fd43eb3 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -1565,7 +1565,7 @@ static int ena_rss_configure(struct ena_adapter *adapter)
static int ena_up_complete(struct ena_adapter *adapter)
{
- int rc, i;
+ int rc;
rc = ena_rss_configure(adapter);
if (rc)
@@ -1584,17 +1584,6 @@ static int ena_up_complete(struct ena_adapter *adapter)
ena_napi_enable_all(adapter);
- /* Enable completion queues interrupt */
- for (i = 0; i < adapter->num_queues; i++)
- ena_unmask_interrupt(&adapter->tx_ring[i],
- &adapter->rx_ring[i]);
-
- /* schedule napi in case we had pending packets
- * from the last time we disable napi
- */
- for (i = 0; i < adapter->num_queues; i++)
- napi_schedule(&adapter->ena_napi[i].napi);
-
return 0;
}
@@ -1731,7 +1720,7 @@ static int ena_create_all_io_rx_queues(struct ena_adapter
*adapter)
static int ena_up(struct ena_adapter *adapter)
{
- int rc;
+ int rc, i;
netdev_dbg(adapter->netdev, "%s\n", __func__);
@@ -1774,6 +1763,17 @@ static int ena_up(struct ena_adapter *adapter)
set_bit(ENA_FLAG_DEV_UP, &adapter->flags);
+ /* Enable completion queues interrupt */
+ for (i = 0; i < adapter->num_queues; i++)
+ ena_unmask_interrupt(&adapter->tx_ring[i],
+ &adapter->rx_ring[i]);
+
+ /* schedule napi in case we had pending packets
+ * from the last time we disable napi
+ */
+ for (i = 0; i < adapter->num_queues; i++)
+ napi_schedule(&adapter->ena_napi[i].napi);
+
return rc;
err_up:
--
2.7.3.AMZN
