Add compatible for Marvell 88E6240 switch.
Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
---
Documentation/devicetree/bindings/net/dsa/marvell.txt | 6 ++++--
drivers/net/dsa/mv88e6xxx/chip.c | 4 ++++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt
b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 1d4d0f49c9d0..cf437b526f7f 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -14,8 +14,10 @@ The properties described here are those specific to Marvell
devices.
Additional required and optional properties can be found in dsa.txt.
Required properties:
-- compatible : Should be one of "marvell,mv88e6085" or
- "marvell,mv88e6190"
+- compatible : Should be one of the following
+ * "marvell,mv88e6085"
+ * "marvell,mv88e6190"
+ * "marvell,mv88e6240"
- reg : Address on the MII bus for the switch.
Optional properties:
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 66d33e97cbc5..78ff06239b58 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -4012,6 +4012,10 @@ static const struct of_device_id mv88e6xxx_of_match[] = {
.compatible = "marvell,mv88e6190",
.data = &mv88e6xxx_table[MV88E6190],
},
+ {
+ .compatible = "marvell,mv88e6240",
+ .data = &mv88e6xxx_table[MV88E6240],
+ },
{ /* sentinel */ },
};
--
2.15.1
