On Wed, Jan 17, 2018 at 10:50 PM, Benjamin Poirier <bpoir...@suse.com> wrote:
> It was reported that emulated e1000e devices in vmware esxi 6.5 Build
> 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
> overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
> e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
> on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
> icr=0x80000004 (_INT_ASSERTED | _OTHER) in the same situation.
Isn't 0x80000004 (_INT_ASSERTED | _LSC)? The assumption I based my
patch on was that the VMware code was sending _OTHER instead of _LSC
to trigger LSC events. As such in my version of the workaround I just
went through and did the testing if the _RXO bit was set, otherwise I
assumed that whatever event was received must have been meant to
trigger an _LSC type event since that worked in the past.
> Some experimentation showed that this flaw in vmware e1000e emulation can
> be worked around by not setting Other in EIAC. This is how it was before
> 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
Did this actually set the _LSC bit or was it just giving you the
_OTHER bit? The ICR for that combination would come out 0x81000000.
> Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
> Signed-off-by: Benjamin Poirier <bpoir...@suse.com>
> ---
>
> Jeff, I'm sending as RFC since it looks like a problem that should be fixed
> in vmware. If you'd like to have the workaround in e1000e, I'll submit.
I would appreciate it if you could review/test the patch I submitted
for the same issue. Specifically I would want to make certain that it
still addresses the original RXO interrupt burst issue your reported.
Thanks.
- Alex
