The DTS-patch for this board (in "old" format) is attached

Yan Markman
Tel. 05-44732819


-----Original Message-----
From: Stefan Chulski 
Sent: Monday, March 19, 2018 2:58 PM
To: Russell King - ARM Linux <li...@armlinux.org.uk>; Antoine Tenart 
<antoine.ten...@bootlin.com>
Cc: da...@davemloft.net; kis...@ti.com; gregory.clem...@bootlin.com; 
and...@lunn.ch; ja...@lakedaemon.net; sebastian.hesselba...@gmail.com; 
netdev@vger.kernel.org; linux-ker...@vger.kernel.org; 
thomas.petazz...@bootlin.com; maxime.chevall...@bootlin.com; 
miquel.ray...@bootlin.com; Nadav Haklai <nad...@marvell.com>; Yan Markman 
<ymark...@marvell.com>; m...@semihalf.com; linux-arm-ker...@lists.infradead.org
Subject: RE: [EXT] Re: [PATCH net-next 02/10] net: phy: phylink: allow 10GKR 
interface to use in-band negotiation

> > > There is no inband negotiation like there is with 802.3z or SGMII, 
> > > so this makes no sense.
> >
> > Oh, that's what I feared. I read some docs but probably will need 
> > more
> > :)
> >
> > Anyway, the reason to use in-band negotiation was also to avoid 
> > using fixed-link. It would work but always report the link is up, 
> > which for the user isn't a great experience as we have a way to detect this.
> >
> > What would you suggest to achieve this in a reasonable way?
> 
> The intention of this test in phylink_of_phy_connect() is to avoid 
> failing when there is no requirement for a PHY to be present (such as 
> a fixed link, or an 802.3z link.)  However, with 10G PHYs such as the 
> 3310, we need the PHY so we can read the speed from it, and so know 
> whether to downgrade the MAC to SGMII mode, or having downgraded the 
> MAC, upgrade it back to 10G mode when the PHY switches to 10G.
> 
> I'm guessing that you're wanting this for the DB boards, but I don't see why.
> Do they not have PHYs?

New Solid Run board MACCHIATObin Single Shot doesn't has  3310 PHY either, like 
DB boards.
https://www.cnx-software.com/2017/12/20/solidrun-macchiatobin-single-shot-networking-board-launched-for-269-and-up/

Stefan,
Best Regards.

Attachment: 0001-arm64-dts-marvell-add-new-mcbin-single-shot-board.patch
Description: 0001-arm64-dts-marvell-add-new-mcbin-single-shot-board.patch

Reply via email to