On 4/17/18 5:29 PM, Ben Greear wrote:
>
> FYI, problem still happens in 4.16. I'm going to re-enable my hack below
> for this kernel as well...I had hopes it might be fixed...
Interesting. I was hoping the same.
>
> BUG: unable to handle kernel NULL pointer dereference at 8
> IP: fib6_walk_continue+0x5b/0x140 [ipv6]
> PGD 80000007dfc0c067 P4D 80000007dfc0c067 PUD 7e66ff067 PMD 0
> Oops: 0000 [#1] PREEMPT SMP PTI
> Modules linked in: nf_conntrack_netlink nf_conntrack nfnetlink
> nf_defrag_ipv4 libcrc32c vrf]
> CPU: 3 PID: 15117 Comm: ip Tainted: G O 4.16.0+ #5
> Hardware name: Iron_Systems,Inc CS-CAD-2U-A02/X10SRL-F, BIOS 2.0b
> 05/02/2017
> RIP: 0010:fib6_walk_continue+0x5b/0x140 [ipv6]
> RSP: 0018:ffffc90008c3bc10 EFLAGS: 00010287
> RAX: ffff88085ac45050 RBX: ffff8807e03008a0 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: ffffc90008c3bc48 RDI: ffffffff8232b240
> RBP: ffff880819167600 R08: 0000000000000008 R09: ffff8807dff10071
> R10: ffffc90008c3bbd0 R11: 0000000000000000 R12: ffff8807e03008a0
> R13: 0000000000000002 R14: ffff8807e05744c8 R15: ffff8807e08ef000
> FS: 00007f2f04342700(0000) GS:ffff88087fcc0000(0000)
> knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000008 CR3: 00000007e0556002 CR4: 00000000003606e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> inet6_dump_fib+0x14b/0x2c0 [ipv6]
> netlink_dump+0x216/0x2a0
> netlink_recvmsg+0x254/0x400
> ? copy_msghdr_from_user+0xb5/0x110
> ___sys_recvmsg+0xe9/0x230
> ? find_held_lock+0x3b/0xb0
> ? __handle_mm_fault+0x617/0x1180
> ? __audit_syscall_entry+0xb3/0x110
> ? __sys_recvmsg+0x39/0x70
> __sys_recvmsg+0x39/0x70
> do_syscall_64+0x63/0x120
> entry_SYSCALL_64_after_hwframe+0x3d/0xa2
> RIP: 0033:0x7f2f03a72030
> RSP: 002b:00007fffab3de508 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
> RAX: ffffffffffffffda RBX: 00007fffab3e641c RCX: 00007f2f03a72030
> RDX: 0000000000000000 RSI: 00007fffab3de570 RDI: 0000000000000004
> RBP: 0000000000000000 R08: 0000000000007e6c R09: 00007fffab3e63a8
> R10: 00007fffab3de5b0 R11: 0000000000000246 R12: 00007fffab3e6608
> R13: 000000000066b460 R14: 0000000000007e6c R15: 0000000000000000
> Code: 85 d2 74 17 f6 40 2a 04 74 11 8b 53 2c 85 d2 0f 84 d7 00 00 00 83
> ea 01 89 53 2c c7 4
> RIP: fib6_walk_continue+0x5b/0x140 [ipv6] RSP: ffffc90008c3bc10
> CR2: 0000000000000008
> ---[ end trace bd03458864eb266c ]---
> Kernel panic - not syncing: Fatal exception in interrupt
> Kernel Offset: disabled
> Rebooting in 10 seconds..
> ACPI MEMORY or I/O RESET_REG.
>
Since you can reproduce, would you mind trying
https://github.com/dsahern/linux.git ipv6/fib6-change-v2
Hopefully these will be committed upstream soon. It changes the game a
bit with the FIB walker. Would be interesting to know if this problem
goes away.
