+ Robert Schwebel (who thankfully did the txt -> rst conversion for can.txt)
On 05/07/2018 11:35 AM, Mauro Carvalho Chehab wrote: > As stated at: > > http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#footnotes > > A footnote should contain either a number, a reference or > an auto number, e. g.: > [1], [#f1] or [#]. > > While using [*] accidentaly works for html, it fails for other > document outputs. In particular, it causes an error with LaTeX > output, causing all books after networking to not be built. > > So, replace it by a valid syntax. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+sams...@kernel.org> Acked-by: Oliver Hartkopp <socket...@hartkopp.net> Thanks Mauro! Best regards, Oliver > --- > Documentation/networking/can.rst | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/networking/can.rst > b/Documentation/networking/can.rst > index d23c51abf8c6..2fd0b51a8c52 100644 > --- a/Documentation/networking/can.rst > +++ b/Documentation/networking/can.rst > @@ -164,7 +164,7 @@ The Linux network devices (by default) just can handle the > transmission and reception of media dependent frames. Due to the > arbitration on the CAN bus the transmission of a low prio CAN-ID > may be delayed by the reception of a high prio CAN frame. To > -reflect the correct [*]_ traffic on the node the loopback of the sent > +reflect the correct [#f1]_ traffic on the node the loopback of the sent > data has to be performed right after a successful transmission. If > the CAN network interface is not capable of performing the loopback for > some reason the SocketCAN core can do this task as a fallback solution. > @@ -175,7 +175,7 @@ networking behaviour for CAN applications. Due to some > requests from > the RT-SocketCAN group the loopback optionally may be disabled for each > separate socket. See sockopts from the CAN RAW sockets in > :ref:`socketcan-raw-sockets`. > > -.. [*] you really like to have this when you're running analyser > +.. [#f1] you really like to have this when you're running analyser > tools like 'candump' or 'cansniffer' on the (same) node. > > >
