Add constants and callback functions for the dwmac on px30 soc.
The base structure is the same, but registers and the bits in
them moved slightly, and add the clk_mac_speed for the select
of mac speed.
Signed-off-by: David Wu <david...@rock-chips.com>
---
.../devicetree/bindings/net/rockchip-dwmac.txt | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 64 ++++++++++++++++++++++
2 files changed, 65 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index 9c16ee2..3b71da7 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -4,6 +4,7 @@ The device node has following properties.
Required properties:
- compatible: should be "rockchip,<name>-gamc"
+ "rockchip,px30-gmac": found on PX30 SoCs
"rockchip,rk3128-gmac": found on RK312x SoCs
"rockchip,rk3228-gmac": found on RK322x SoCs
"rockchip,rk3288-gmac": found on RK3288 SoCs
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 13133b3..4b2ab71 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -61,6 +61,7 @@ struct rk_priv_data {
struct clk *mac_clk_tx;
struct clk *clk_mac_ref;
struct clk *clk_mac_refout;
+ struct clk *clk_mac_speed;
struct clk *aclk_mac;
struct clk *pclk_mac;
struct clk *clk_phy;
@@ -83,6 +84,64 @@ struct rk_priv_data {
(((tx) ? soc##_GMAC_TXCLK_DLY_ENABLE : soc##_GMAC_TXCLK_DLY_DISABLE) | \
((rx) ? soc##_GMAC_RXCLK_DLY_ENABLE : soc##_GMAC_RXCLK_DLY_DISABLE))
+#define PX30_GRF_GMAC_CON1 0X0904
+
+/* PX30_GRF_GMAC_CON1 */
+#define PX30_GMAC_PHY_INTF_SEL_RMII (GRF_CLR_BIT(4) | GRF_CLR_BIT(5) | \
+ GRF_BIT(6))
+#define PX30_GMAC_SPEED_10M GRF_CLR_BIT(2)
+#define PX30_GMAC_SPEED_100M GRF_BIT(2)
+
+static void px30_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+
+ if (IS_ERR(bsp_priv->grf)) {
+ dev_err(dev, "%s: Missing rockchip,grf property\n", __func__);
+ return;
+ }
+
+ regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+ PX30_GMAC_PHY_INTF_SEL_RMII);
+}
+
+static void px30_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+ struct device *dev = &bsp_priv->pdev->dev;
+ int ret;
+
+ if (IS_ERR(bsp_priv->clk_mac_speed)) {
+ dev_err(dev, "%s: Missing clk_mac_speed clock\n", __func__);
+ return;
+ }
+
+ if (speed == 10) {
+ regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+ PX30_GMAC_SPEED_10M);
+
+ ret = clk_set_rate(bsp_priv->clk_mac_speed, 2500000);
+ if (ret)
+ dev_err(dev, "%s: set clk_mac_speed rate 2500000
failed: %d\n",
+ __func__, ret);
+ } else if (speed == 100) {
+ regmap_write(bsp_priv->grf, PX30_GRF_GMAC_CON1,
+ PX30_GMAC_SPEED_100M);
+
+ ret = clk_set_rate(bsp_priv->clk_mac_speed, 25000000);
+ if (ret)
+ dev_err(dev, "%s: set clk_mac_speed rate 25000000
failed: %d\n",
+ __func__, ret);
+
+ } else {
+ dev_err(dev, "unknown speed value for RMII! speed=%d", speed);
+ }
+}
+
+static const struct rk_gmac_ops px30_ops = {
+ .set_to_rmii = px30_set_to_rmii,
+ .set_rmii_speed = px30_set_rmii_speed,
+};
+
#define RK3128_GRF_MAC_CON0 0x0168
#define RK3128_GRF_MAC_CON1 0x016c
@@ -1042,6 +1101,10 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data
*plat)
}
}
+ bsp_priv->clk_mac_speed = devm_clk_get(dev, "clk_mac_speed");
+ if (IS_ERR(bsp_priv->clk_mac_speed))
+ dev_err(dev, "cannot get clock %s\n", "clk_mac_speed");
+
if (bsp_priv->clock_input) {
dev_info(dev, "clock input from PHY\n");
} else {
@@ -1424,6 +1487,7 @@ static int rk_gmac_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(rk_gmac_pm_ops, rk_gmac_suspend, rk_gmac_resume);
static const struct of_device_id rk_gmac_dwmac_match[] = {
+ { .compatible = "rockchip,px30-gmac", .data = &px30_ops },
{ .compatible = "rockchip,rk3128-gmac", .data = &rk3128_ops },
{ .compatible = "rockchip,rk3228-gmac", .data = &rk3228_ops },
{ .compatible = "rockchip,rk3288-gmac", .data = &rk3288_ops },
--
2.7.4
