From: "Banerjee, Debabrata" <dbane...@akamai.com> Date: Wed, 16 May 2018 16:54:40 +0000
> See output of /proc/net/bonding/bond0 below, same content as the > prior email. bnx2x driver, on ith1: "MII Status: up" is directly > from netif_carrier_ok(bond->dev) , but speed and duplex are unknown, > which come from the same call as would be used from > bond_mii_monitor(), __ethtool_get_link_ksettings(slave_dev, > &ecmd). Yes it's possible this is because of bugs in the drivers > themselves, but without being able to readily reproduce the state > below we can't debug it, nor do we know which combination of > hardware and drivers are reliable at any given point in time. We can > say though that if this had been set to "both", ith1 would have been > correctly removed from the bond. That said if this is still > controversial I can resubmit the series without this patch. Looking at the bnx2x driver, it's management of link state is very convoluted. The link parameters and the "link_up" state is maintained separately from the values that are snapshot when the carrier is enabled. I don't think we should reward drivers for behaving this way. If the carrier is up, you should be able to provide the link speed and duplex values immediately not some indeterminate amount of time later.
