On 05/22/2018 07:22 PM, Rob Herring wrote:
> On Mon, May 21, 2018 at 10:07:26AM +0200, Christophe Roullier wrote:
>> This patch describes syscon DT bindings.
>>
>> Signed-off-by: Christophe Roullier <[email protected]>
>> ---
>> Documentation/devicetree/bindings/arm/stm32.txt | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/stm32.txt
>> b/Documentation/devicetree/bindings/arm/stm32.txt
>> index 6808ed9..e46ebad 100644
>> --- a/Documentation/devicetree/bindings/arm/stm32.txt
>> +++ b/Documentation/devicetree/bindings/arm/stm32.txt
>> @@ -8,3 +8,8 @@ using one of the following compatible strings:
>> st,stm32f746
>> st,stm32h743
>> st,stm32mp157
>> +
>> +Required nodes:
>> +- syscon: the soc bus node must have a system controller node pointing to
>> the
>> + global control registers, with the compatible string
>> + "st,stm32mp157-syscfg", "syscon";
>
> Please don't mix soc/board bindings with other nodes. So perhaps
> stm32-syscon.txt.
>
> Rob
>
Hi Rob,
Is it ok for you with this tree file:
Documentation/devicetree/bindings/arm/stm32/stm32.txt
Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt
With stm32-syscon.txt:
---------------------------------------------------
STMicroelectronics STM32 Platforms System Controller
Properties:
- compatible : should contain two values. First value must be :
- " st,stm32mp157-syscfg " - for stm32mp157 based SoCs,
second value must be always "syscon".
- reg : offset and length of the register set.
Example:
syscfg: system-config@50020000 {
compatible = "st,stm32mp157-syscfg", "syscon";
reg = <0x50020000 0x400>;
};
---------------------------------------------------
Do we need to update also all MCU family (stm32f4, stm32h7, stm32f7)
property to be coherent ?
Thanks for your feedback.
Christophe.
