On 05/22/2018 11:20 PM, Michal Vokáč wrote: > This series basically adds support for a QCA8334 ethernet switch to the > qca8k driver. It is a four-port variant of the already supported seven > port QCA8337. Register map is the same for the whole familly and all chips > have the same device ID. > > Major part of this series enhances the CPU port setting. Currently the CPU > port is not set to any sensible defaults compatible with the xGMII > interface. This series forces the CPU port to its maximum bandwidth and > also allows to adjust the new defaults using fixed-link device tree > sub-node. > > Alongside these changes I fixed two checkpatch warnings regarding SPDX and > redundant parentheses.
Looks great, thanks Michal! Do you have any features or things you are working on that would be added later to the driver? > > Changes in v3: > - Rebased on latest net-next/master. > - Corrected fixed-link documentation. > > Michal Vokáč (7): > net: dsa: qca8k: Add QCA8334 binding documentation > net: dsa: qca8k: Add support for QCA8334 switch > net: dsa: qca8k: Enable RXMAC when bringing up a port > net: dsa: qca8k: Force CPU port to its highest bandwidth > net: dsa: qca8k: Allow overwriting CPU port setting > net: dsa: qca8k: Replace GPL boilerplate by SPDX > net: dsa: qca8k: Remove redundant parentheses > > .../devicetree/bindings/net/dsa/qca8k.txt | 23 +++++++- > drivers/net/dsa/qca8k.c | 64 > ++++++++++++++++++---- > drivers/net/dsa/qca8k.h | 7 ++- > 3 files changed, 79 insertions(+), 15 deletions(-) > -- Florian
