On 25/05/2018 at 23:44, Jennifer Dahm wrote:
The Zynq ethernet hardware has checksum offloading bugs that cause
small UDP packets (<= 2 bytes) to be sent with an incorrect checksum
(0xffff) and forwarded UDP packets to be re-checksummed, which is
illegal behavior. The best solution we have right now is to disable
hardware TX checksum offloading entirely.
Signed-off-by: Jennifer Dahm <jennifer.d...@ni.com>
Adding some xilinx people I know...
---
drivers/net/ethernet/cadence/macb_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c
b/drivers/net/ethernet/cadence/macb_main.c
index a5d564b..e8cc68a 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -3807,7 +3807,8 @@ static const struct macb_config zynqmp_config = {
};
static const struct macb_config zynq_config = {
- .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF,
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_NO_GIGABIT_HALF
+ | MACB_CAPS_DISABLE_TX_HW_CSUM,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
.init = macb_init,
--
Nicolas Ferre
