Add new core_env module to allow port temperature reading. This
information has most critical impact on system's thermal monitoring and
is to be used by core_hwmon and core_thermal modules.
New internal API reads the temperature from all the modules, which are
equipped with the thermal sensor and exposes temperature according to
the worst measure. All individual temperature values are normalized to
pre-defined range.
Signed-off-by: Vadim Pasternak <vad...@mellanox.com>
Acked-by: Jiri Pirko <j...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/Makefile | 2 +-
drivers/net/ethernet/mellanox/mlxsw/core_env.c | 316 +++++++++++++++++++++++++
drivers/net/ethernet/mellanox/mlxsw/core_env.h | 63 +++++
3 files changed, 380 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/mellanox/mlxsw/core_env.c
create mode 100644 drivers/net/ethernet/mellanox/mlxsw/core_env.h
diff --git a/drivers/net/ethernet/mellanox/mlxsw/Makefile
b/drivers/net/ethernet/mellanox/mlxsw/Makefile
index 0cadcab..9f1dc0b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/Makefile
+++ b/drivers/net/ethernet/mellanox/mlxsw/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_MLXSW_CORE) += mlxsw_core.o
mlxsw_core-objs := core.o core_acl_flex_keys.o \
- core_acl_flex_actions.o
+ core_acl_flex_actions.o core_env.o
mlxsw_core-$(CONFIG_MLXSW_CORE_HWMON) += core_hwmon.o
mlxsw_core-$(CONFIG_MLXSW_CORE_THERMAL) += core_thermal.o
obj-$(CONFIG_MLXSW_PCI) += mlxsw_pci.o
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c
b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
new file mode 100644
index 0000000..fb6394d
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
@@ -0,0 +1,316 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/core_env.c
+ * Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#include "core.h"
+#include "core_env.h"
+#include "item.h"
+
+union mlxsw_env_port_thresh {
+ u8 buf[MLXSW_REG_MCIA_TH_SIZE];
+ struct mlxsw_env_port_temp_th {
+ u16 temp_alarm_hi;
+ u16 temp_alarm_lo;
+ u16 temp_warn_hi;
+ u16 temp_warn_low;
+ } t;
+};
+
+static int mlxsw_env_bulk_get(struct mlxsw_core *core,
+ int *ports_temp_cache, int port_count,
+ bool *untrusted_sensor)
+{
+ char mtbr_pl[MLXSW_REG_MTBR_LEN];
+ int i, j, count, off;
+ u16 temp;
+ int err;
+
+ /* Read ports temperature. */
+ if (untrusted_sensor)
+ *untrusted_sensor = false;
+ count = 0;
+ while (count < port_count) {
+ off = min_t(u8, MLXSW_REG_MTBR_REC_MAX_COUNT,
+ port_count - count);
+ mlxsw_reg_mtbr_pack(mtbr_pl, MLXSW_REG_MTBR_BASE_PORT_INDEX +
+ count, off);
+ err = mlxsw_reg_query(core, MLXSW_REG(mtbr), mtbr_pl);
+ if (err)
+ return err;
+
+ for (i = 0, j = count; i < off; i++, j++) {
+ mlxsw_reg_mtbr_temp_unpack(mtbr_pl, i, &temp, NULL);
+
+ /* Update status and temperature cache. */
+ switch (temp) {
+ case MLXSW_REG_MTBR_NO_CONN:
+ case MLXSW_REG_MTBR_NO_TEMP_SENS:
+ case MLXSW_REG_MTBR_INDEX_NA:
+ ports_temp_cache[j] = 0;
+ break;
+ case MLXSW_REG_MTBR_BAD_SENS_INFO:
+ /* Untrusted cable is connected. It means that
+ * reading temperature from its sensor is
+ * unreliable and thermal control should
+ * consider increasing system's FAN speed
+ * according to the system requirements.
+ * The presence of untrusted cable is exposed
+ * to hwmon through temp1_fault attribute.
+ */
+ ports_temp_cache[j] = 0;
+ if (untrusted_sensor)
+ *untrusted_sensor = false;
+ break;
+ default:
+ ports_temp_cache[j] =
+ MLXSW_REG_MTMP_TEMP_TO_MC(temp);
+ break;
+ }
+ }
+ count += off;
+ }
+
+ return 0;
+}
+
+static void mlxsw_env_scale_temp(int hot, int crit, int tdelta, u8 mask,
+ int *temp)
+{
+ int twindow;
+
+ /* Scale port temperature thresholds window to the based window: do
+ * nothong, if windows are equal, shrink window if it exceeds, expand
+ * in other case. Set delta according this scale.
+ */
+ twindow = crit - hot;
+ if (twindow > MLXSW_ENV_TEMP_WINDOW)
+ tdelta /= DIV_ROUND_CLOSEST(twindow, MLXSW_ENV_TEMP_WINDOW);
+ else if (twindow < MLXSW_ENV_TEMP_WINDOW)
+ tdelta *= DIV_ROUND_CLOSEST(MLXSW_ENV_TEMP_WINDOW, twindow);
+
+ switch (mask) {
+ case MLXSW_ENV_CRIT_MASK:
+ *temp = clamp_val(MLXSW_ENV_TEMP_HOT + tdelta,
+ MLXSW_ENV_TEMP_HOT, MLXSW_ENV_TEMP_CRIT);
+ break;
+ case MLXSW_ENV_HOT_MASK:
+ *temp = clamp_val(MLXSW_ENV_TEMP_NORM + tdelta,
+ MLXSW_ENV_TEMP_NORM, MLXSW_ENV_TEMP_HOT);
+ break;
+ default:
+ /* Don't set temperature below nominal value. */
+ tdelta %= MLXSW_ENV_TEMP_NORM;
+ *temp = clamp_val(MLXSW_ENV_TEMP_NORM - tdelta, *temp,
+ MLXSW_ENV_TEMP_NORM);
+ break;
+ }
+}
+
+static void mlxsw_env_process_temp(int temp,
+ struct mlxsw_env_temp_thresh *port,
+ struct mlxsw_env_temp_thresh *delta,
+ struct mlxsw_env_temp_multi *multi)
+{
+ int tdelta;
+
+ /* Compare each port temperature sensors values, with warning and
+ * threshold values for this port. Find the worst delta for the all,
+ * sensors which is defined as following:
+ * - if value is below the warning threshold - the closest value to the
+ * warning threshold;
+ * - if value is between the warning and alarm thresholds - the closet
+ * value to the alarm threshold;
+ * - if value is above the alarm threshold - the value with the biggest
+ * delta.
+ * The temperature value should be set according to the worst delta
+ * with the next priority:
+ * - if any sensor above alarm threshold - from the alarm;
+ * - if any sensor above warning threshold - from the hot;
+ * - from norm in other case.
+ */
+ if (!multi->mask && temp < port->hot) {
+ tdelta = port->hot - temp;
+ mlxsw_env_scale_temp(port->hot, port->crit, tdelta, 0, &temp);
+ if (tdelta < delta->normal) {
+ multi->thresh.normal = temp;
+ delta->normal = tdelta;
+ }
+ } else if (temp >= port->crit) {
+ tdelta = temp - port->crit;
+ mlxsw_env_scale_temp(port->hot, port->crit, tdelta,
+ MLXSW_ENV_CRIT_MASK, &temp);
+ if (tdelta > delta->crit) {
+ multi->thresh.crit = temp;
+ delta->crit = tdelta;
+ }
+ multi->mask |= MLXSW_ENV_CRIT_MASK;
+ } else if (!(multi->mask & MLXSW_ENV_CRIT_MASK)) {
+ tdelta = temp - port->hot;
+ mlxsw_env_scale_temp(port->hot, port->crit, tdelta,
+ MLXSW_ENV_HOT_MASK, &temp);
+ if (tdelta > delta->hot) {
+ multi->thresh.hot = temp;
+ delta->hot = tdelta;
+ }
+ multi->mask |= MLXSW_ENV_HOT_MASK;
+ }
+}
+
+static void
+mlxsw_env_finalize_temp(struct mlxsw_env_temp_thresh *delta,
+ struct mlxsw_env_temp_multi *multi, int *temp)
+{
+ /* If the values from the all temperature sensors are:
+ * - above temperature warning threshold - pick for the temperature the
+ * value with biggest delta between the temperature alarm threshold;
+ * - between the temperature warning threshold and the temperature
+ * alarm threshold - pick as the temperature the closest value to the
+ * the temperature warning threshold;
+ * - below the temperature warning threshold - pick as the temperature
+ * the closest to the temperature warning threshold.
+ */
+ if (multi->mask & MLXSW_ENV_CRIT_MASK)
+ *temp = multi->thresh.crit;
+ else if (multi->mask & MLXSW_ENV_HOT_MASK)
+ *temp = multi->thresh.hot;
+ else
+ *temp = multi->thresh.normal;
+}
+
+static int mlxsw_env_validate_cable_ident(struct mlxsw_core *core, int id,
+ bool *qsfp)
+{
+ char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
+ char mcia_pl[MLXSW_REG_MCIA_LEN];
+ u8 ident;
+ int err;
+
+ mlxsw_reg_mcia_pack(mcia_pl, id, 0, MLXSW_REG_MCIA_PAGE0_LO_OFF, 0, 1,
+ MLXSW_REG_MCIA_I2C_ADDR_LOW);
+ err = mlxsw_reg_query(core, MLXSW_REG(mcia), mcia_pl);
+ if (err)
+ return err;
+ mlxsw_reg_mcia_eeprom_memcpy_from(mcia_pl, eeprom_tmp);
+ ident = eeprom_tmp[0];
+ switch (ident) {
+ case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_SFP:
+ *qsfp = false;
+ break;
+ case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP:
+ case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP_PLUS:
+ case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP28:
+ case MLXSW_REG_MCIA_EEPROM_MODULE_INFO_ID_QSFP_DD:
+ *qsfp = true;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int mlxsw_env_collect_port_temp(struct mlxsw_core *core, int *ports_temp_cache,
+ int port_count,
+ struct mlxsw_env_temp_multi *multi,
+ struct mlxsw_env_temp_thresh *delta,
+ bool *untrusted_sensor, int *temp)
+{
+ char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
+ union mlxsw_env_port_thresh thresh;
+ char mcia_pl[MLXSW_REG_MCIA_LEN];
+ struct mlxsw_env_temp_thresh curr;
+ int port_temp, i;
+ bool qsfp;
+ int err;
+
+ memset(&curr, 0, sizeof(struct mlxsw_env_temp_thresh));
+ /* Read ports temperature. */
+ err = mlxsw_env_bulk_get(core, ports_temp_cache, port_count,
+ untrusted_sensor);
+ if (err)
+ return err;
+
+ for (i = 0; i < port_count; i++) {
+ /* Skip port with no temperature sensor */
+ if (!ports_temp_cache[i])
+ continue;
+
+ /* Read Free Side Device Temperature Thresholds from page 03h
+ * (MSB at lower byte address).
+ * Bytes:
+ * 128-129 - Temp High Alarm
+ * 130-131 - Temp Low Alarm
+ * 132-133 - Temp High Warning
+ * 134-135 - Temp Low Warning
+ */
+
+ /* Validate module identifier value. */
+ err = mlxsw_env_validate_cable_ident(core, i, &qsfp);
+ if (err)
+ return err;
+
+ if (qsfp)
+ mlxsw_reg_mcia_pack(mcia_pl, i, 0,
+ MLXSW_REG_MCIA_TH_PAGE_NUM,
+ MLXSW_REG_MCIA_TH_PAGE_OFF,
+ MLXSW_REG_MCIA_TH_SIZE,
+ MLXSW_REG_MCIA_I2C_ADDR_LOW);
+ else
+ mlxsw_reg_mcia_pack(mcia_pl, i, 0,
+ MLXSW_REG_MCIA_PAGE0_LO, 0,
+ MLXSW_REG_MCIA_TH_SIZE,
+ MLXSW_REG_MCIA_I2C_ADDR_HIGH);
+
+ err = mlxsw_reg_query(core, MLXSW_REG(mcia), mcia_pl);
+ if (err)
+ return err;
+
+ mlxsw_reg_mcia_eeprom_memcpy_from(mcia_pl, eeprom_tmp);
+ memcpy(thresh.buf, eeprom_tmp, MLXSW_REG_MCIA_TH_SIZE);
+ /* Skip sensor with no threshold info. */
+ if (!thresh.t.temp_warn_hi || !thresh.t.temp_warn_hi)
+ continue;
+
+ port_temp = ports_temp_cache[i];
+ curr.hot = thresh.t.temp_warn_hi * 1000;
+ curr.crit = thresh.t.temp_alarm_hi * 1000;
+ mlxsw_env_process_temp(port_temp, &curr, delta, multi);
+ }
+
+ mlxsw_env_finalize_temp(delta, multi, temp);
+
+ return 0;
+}
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.h
b/drivers/net/ethernet/mellanox/mlxsw/core_env.h
new file mode 100644
index 0000000..a239d5b
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.h
@@ -0,0 +1,63 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/core_env.h
+ * Copyright (c) 2018 Mellanox Technologies. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_CORE_ENV_H
+#define _MLXSW_CORE_ENV_H
+
+#define MLXSW_ENV_TEMP_UNREACHABLE 150000 /* 150C */
+#define MLXSW_ENV_HOT_MASK BIT(0)
+#define MLXSW_ENV_CRIT_MASK BIT(1)
+#define MLXSW_ENV_TEMP_NORM 75000 /* 75C */
+#define MLXSW_ENV_TEMP_HIGH 85000 /* 85C */
+#define MLXSW_ENV_TEMP_HOT 105000 /* 105C */
+#define MLXSW_ENV_TEMP_CRIT 110000 /* 110C */
+#define MLXSW_ENV_TEMP_WINDOW (MLXSW_ENV_TEMP_HOT - \
+ MLXSW_ENV_TEMP_NORM)
+
+struct mlxsw_env_temp_thresh {
+ int normal;
+ int hot;
+ int crit;
+};
+
+struct mlxsw_env_temp_multi {
+ struct mlxsw_env_temp_thresh thresh;
+ u8 mask;
+};
+
+int mlxsw_env_collect_port_temp(struct mlxsw_core *core, int *ports_temp_cache,
+ int port_count,
+ struct mlxsw_env_temp_multi *multi,
+ struct mlxsw_env_temp_thresh *delta,
+ bool *untrusted_sensor, int *temp);
+#endif
--
2.1.4
