Michael Buesch wrote:
On Tuesday 10 October 2006 16:23, Jory A. Pratt wrote:
Michael Buesch wrote:
On Tuesday 10 October 2006 05:14, Jory A. Pratt wrote:
http://home.nctv.com/anarchy/dscape-clean.jpg
That's hardly readable.
But which firmware are you running? v4.x by chance?
Just for completeness I just tested with v4.x firmware and still get the
panic
4.x firmware won't work. Make sure to use 3.x.
I am not sure what happens.
Any chance to get a more complete oops message? I am also interrested
in the start of the oops message. In particular I would like to see if this
is a NULL pointer bug, machine check or something else.
The backtrace is a little big weird. So I am not sure what happens.
And, Please make _really_ sure to use 3.x firmware. ;)
alright here are two more pics for you.
http://home.nctv.com/anarchy/dscape-clean1.jpg
http://home.nctv.com/anarchy/dscape-clean2.jpg
Here is a bit of dmesg that you might find useful:
ssb: Core 0 found: cc 0800, rev 0D, vendor 4243
ssb: Core 1 found: cc 0812, rev 09, vendor 4243
ssb: Core 2 found: cc 0804, rev 0C, vendor 4243
ssb: Core 3 found: cc 080D, rev 07, vendor 4243
bcm43xx_d80211: Broadcom 4318 WLAN found
ssb: Switching to core 2
ssb: Switching to core 1
bcm43xx_d80211: PHY connected
bcm43xx_d80211: Detected PHY: Version: 3, Type 2, Revision 7
bcm43xx_d80211: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
bcm43xx_d80211: Radio turned off
bcm43xx_d80211: Radio turned off
wmaster0: Selected rate control algorithm 'simple'
bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 5, MAC:
00:90:4b:f2:30:e9)
ssb: Switching to core 0
ssb: Switching to core 1
bcm43xx_d80211: PHY connected
bcm43xx_d80211: firmware revision 127, patchlevel E, date 2005-04-18
02:36:27
ssb: Switching to core 0
bcm43xx_d80211: InitVals (bcm43xx_initvalXX.fw) file-format error.
Please fix your bcm43xx firmware files.
bcm43xx_d80211: core_up for active 802.11 core failed (-71)
bcm43xx_d80211: Virtual interface removed (type: 0x00000002, ID: 5, MAC:
00:90:4b:f2:30:e9)
bcm43xx_d80211: Virtual interface added (type: 0x00000002, ID: 5, MAC:
00:90:4b:f2:30:e9)
ssb: Switching to core 1
bcm43xx_d80211: firmware revision 127, patchlevel E, date 2005-04-18
02:36:27
ssb: Switching to core 0
ssb: Switching to core 1
bcm43xx_d80211: Radio turned on
bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at:
drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1490:bcm43xx_find_lopair()
bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at:
drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1490:bcm43xx_find_lopair()
bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at:
drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1490:bcm43xx_find_lopair()
ssb: Switching to core 0
ssb: Switching to core 1
bcm43xx_d80211: Chip initialized
bcm43xx_d80211: 32-bit DMA initialized
bcm43xx_d80211: Keys cleared
bcm43xx_d80211: Selected 802.11 core (phytype 2)
bcm43xx_d80211: ASSERTION FAILED (radio_attenuation < 10) at:
drivers/net/wireless/d80211/bcm43xx/bcm43xx_phy.c:1490:bcm43xx_find_lopair()
wmaster0: Does not support passive scan, disabled
wlan0: no IPv6 routers present
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
