Both one-bit bitfields have been subsumed into the new 'flags' structure member and the new IEEE80211_TX_STATUS_* definitions.
Signed-off-by: David Kimdon <[EMAIL PROTECTED]> Index: wireless-dev/include/net/d80211.h =================================================================== --- wireless-dev.orig/include/net/d80211.h +++ wireless-dev/include/net/d80211.h @@ -209,8 +209,10 @@ struct ieee80211_tx_status { /* copied ieee80211_tx_control structure */ struct ieee80211_tx_control control; - unsigned int tx_filtered:1; - unsigned int ack:1; /* whether the TX frame was ACKed */ +#define IEEE80211_TX_STATUS_TX_FILTERED (1<<0) +#define IEEE80211_TX_STATUS_ACK (1<<1) /* whether the TX frame was ACKed */ + u32 flags; /* tx staus flags defined above */ + int ack_signal; /* measured signal strength of the ACK frame */ int excessive_retries; int retry_count; Index: wireless-dev/drivers/net/wireless/d80211/adm8211/adm8211.c =================================================================== --- wireless-dev.orig/drivers/net/wireless/d80211/adm8211/adm8211.c +++ wireless-dev/drivers/net/wireless/d80211/adm8211/adm8211.c @@ -427,12 +427,14 @@ static void adm8211_interrupt_tci(struct if (status & TDES0_STATUS_ES) { stats->tx_errors++; - priv->tx_buffers[entry].tx_status.ack = 0; + priv->tx_buffers[entry].tx_status.flags &= + ~IEEE80211_TX_STATUS_ACK; if (status & (TDES0_STATUS_TUF | TDES0_STATUS_TRO)) stats->tx_fifo_errors++; } else - priv->tx_buffers[entry].tx_status.ack = 1; + priv->tx_buffers[entry].tx_status.flags |= + IEEE80211_TX_STATUS_ACK; pci_unmap_single(priv->pdev, priv->tx_buffers[entry].mapping, priv->tx_buffers[entry].skb->len, PCI_DMA_TODEVICE); Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c =================================================================== --- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c +++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c @@ -1079,7 +1079,8 @@ void bcm43xx_dma_handle_xmitstatus(struc * status of the transmission. * Some fields of txstat are already filled in dma_tx(). */ - meta->txstat.ack = !!(status->flags & BCM43xx_TXSTAT_FLAG_ACK); + if (status->flags & BCM43xx_TXSTAT_FLAG_ACK) + meta->txstat.flags |= IEEE80211_TX_STATUS_ACK; meta->txstat.retry_count = status->cnt2 - 1; ieee80211_tx_status_irqsafe(bcm->net_dev, meta->skb, &(meta->txstat)); /* skb is freed by ieee80211_tx_status_irqsafe() */ Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c =================================================================== --- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c +++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c @@ -477,7 +477,8 @@ void bcm43xx_pio_handle_xmitstatus(struc queue->tx_devq_packets--; queue->tx_devq_used -= (packet->skb->len + sizeof(struct bcm43xx_txhdr)); - packet->txstat.ack = !!(status->flags & BCM43xx_TXSTAT_FLAG_ACK); + if (status->flags & BCM43xx_TXSTAT_FLAG_ACK) + packet->txstat.flags |= IEEE80211_TX_STATUS_ACK; packet->txstat.retry_count = status->cnt2 - 1; ieee80211_tx_status_irqsafe(bcm->net_dev, packet->skb, &(packet->txstat)); Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c =================================================================== --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2400pci.c +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c @@ -1741,10 +1741,11 @@ static void rt2400pci_txdone(void *data) ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK); + entry->tx_status.flags = 0; /* - * TODO: How can te below field be set correctly? + * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of + * entry->tx_status.flags be set correctly? */ - entry->tx_status.tx_filtered = 0; entry->tx_status.queue_length = ring->stats.limit; entry->tx_status.queue_number = entry->tx_status.control.queue; @@ -1756,11 +1757,10 @@ static void rt2400pci_txdone(void *data) * was succesfull. */ tx_status = rt2x00_get_field32(txd->word0, TXD_W0_RESULT); - entry->tx_status.ack = 0; entry->tx_status.excessive_retries = 0; if (ack && (tx_status == TX_SUCCESS || tx_status == TX_SUCCESS_RETRY)) - entry->tx_status.ack = 1; + entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK; else if (ack && tx_status == TX_FAIL_RETRY) { rt2x00dev->low_level_stats.dot11ACKFailureCount++; entry->tx_status.excessive_retries = 1; Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c =================================================================== --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500pci.c +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c @@ -1890,10 +1890,11 @@ static void rt2500pci_txdone(void *data) ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK); + entry->tx_status.flags = 0; /* - * TODO: How can te below field be set correctly? + * TODO: How can the IEEE80211_TX_STATUS_TX_FILTERED bit of + * entry->tx_status.flags be set correctly? */ - entry->tx_status.tx_filtered = 0; entry->tx_status.queue_length = ring->stats.limit; entry->tx_status.queue_number = entry->tx_status.control.queue; @@ -1905,11 +1906,10 @@ static void rt2500pci_txdone(void *data) * was succesfull. */ tx_status = rt2x00_get_field32(txd->word0, TXD_W0_RESULT); - entry->tx_status.ack = 0; entry->tx_status.excessive_retries = 0; if (ack && (tx_status == TX_SUCCESS || tx_status == TX_SUCCESS_RETRY)) - entry->tx_status.ack = 1; + entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK; else if (ack && tx_status == TX_FAIL_RETRY) { rt2x00dev->low_level_stats.dot11ACKFailureCount++; entry->tx_status.excessive_retries = 1; Index: wireless-dev/net/d80211/ieee80211.c =================================================================== --- wireless-dev.orig/net/d80211/ieee80211.c +++ wireless-dev/net/d80211/ieee80211.c @@ -4043,13 +4043,13 @@ void ieee80211_tx_status(struct net_devi * that this TX packet failed because of that. */ status->excessive_retries = 0; - status->tx_filtered = 1; + status->flags |= IEEE80211_TX_STATUS_TX_FILTERED; } sta_info_put(sta); } } - if (status->tx_filtered) { + if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) { struct sta_info *sta; sta = sta_info_get(local, hdr->addr1); if (sta) { @@ -4111,7 +4111,7 @@ void ieee80211_tx_status(struct net_devi frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE; - if (status->ack) { + if (status->flags & IEEE80211_TX_STATUS_ACK) { if (frag == 0) { local->dot11TransmittedFrameCount++; if (is_multicast_ether_addr(hdr->addr1)) @@ -4140,8 +4140,8 @@ void ieee80211_tx_status(struct net_devi return; } - msg_type = status->ack ? ieee80211_msg_tx_callback_ack : - ieee80211_msg_tx_callback_fail; + msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ? + ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail; /* skb was the original skb used for TX. Clone it and give the clone * to netif_rx(). Free original skb. */ Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c =================================================================== --- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt61pci.c +++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c @@ -2326,10 +2326,11 @@ static void rt61pci_txdone_entry(struct ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK); + entry->tx_status.flags = 0; /* - * TODO: How can te below field be set correctly? + * TODO: How can the IEEE80211_TX_STATUS_TX_FILTERED bit of + * entry->tx_status.flags be set correctly? */ - entry->tx_status.tx_filtered = 0; entry->tx_status.queue_length = entry->ring->stats.limit; entry->tx_status.queue_number = entry->tx_status.control.queue; @@ -2341,11 +2342,10 @@ static void rt61pci_txdone_entry(struct * was succesfull. */ tx_status = rt2x00_get_field32(sta_csr4, STA_CSR4_TX_RESULT); - entry->tx_status.ack = 0; entry->tx_status.excessive_retries = 0; if (ack && (tx_status == TX_SUCCESS || tx_status == TX_SUCCESS_RETRY)) - entry->tx_status.ack = 1; + entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK; else if (ack && tx_status == TX_FAIL_RETRY) { rt2x00dev->low_level_stats.dot11ACKFailureCount++; entry->tx_status.excessive_retries = 1; -- - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html