The PDQ DMA engine requires a different byte-swapping mode for big-endian 
hosts; also the MAC address which is read from a register through PIO has 
to be byte-swapped.  These changes have been verified with DEFPA-DC (PCI) 
boards and a Broadcom BCM91250A (MIPS CPU based) host.

Signed-off-by: Maciej W. Rozycki <[EMAIL PROTECTED]>
---

 Please apply.

  Maciej

patch-mips-2.6.18-20060920-defxx-eb-3
diff -up --recursive --new-file 
linux-mips-2.6.18-20060920.macro/drivers/net/defxx.c 
linux-mips-2.6.18-20060920/drivers/net/defxx.c
--- linux-mips-2.6.18-20060920.macro/drivers/net/defxx.c        2006-09-20 
20:50:22.000000000 +0000
+++ linux-mips-2.6.18-20060920/drivers/net/defxx.c      2006-10-23 
00:43:03.000000000 +0000
@@ -192,6 +192,7 @@
  *             04 Aug 2003     macro           Converted to the DMA API.
  *             14 Aug 2004     macro           Fix device names reported.
  *             14 Jun 2005     macro           Use irqreturn_t.
+ *             23 Oct 2006     macro           Big-endian host support.
  */
 
 /* Include files */
@@ -218,8 +219,8 @@
 
 /* Version information string should be updated prior to each new release!  */
 #define DRV_NAME "defxx"
-#define DRV_VERSION "v1.08"
-#define DRV_RELDATE "2005/06/14"
+#define DRV_VERSION "v1.09"
+#define DRV_RELDATE "2006/10/23"
 
 static char version[] __devinitdata =
        DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
@@ -860,6 +861,7 @@ static int __devinit dfx_driver_init(str
                       print_name);
                return(DFX_K_FAILURE);
        }
+       data = cpu_to_le32(data);
        memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
 
        if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
@@ -868,6 +870,7 @@ static int __devinit dfx_driver_init(str
                       print_name);
                return(DFX_K_FAILURE);
        }
+       data = cpu_to_le32(data);
        memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
 
        /*
@@ -1086,27 +1089,23 @@ static int dfx_adap_init(DFX_board_t *bp
                }
 
        /*
-        * Set base address of Descriptor Block and bring adapter to 
DMA_AVAILABLE state
+        * Set the base address of Descriptor Block and bring adapter
+        * to DMA_AVAILABLE state.
         *
-        * Note: We also set the literal and data swapping requirements in this
-        *           command.  Since this driver presently runs on Intel 
platforms
-        *               which are Little Endian, we'll tell the adapter to 
byte swap
-        *               data only.  This code will need to change when we 
support
-        *               Big Endian systems (eg. PowerPC).
+        * Note: We also set the literal and data swapping requirements
+        *       in this command.
         *
-        * Assumption: 32-bit physical address of descriptor block is 8Kbyte
-        *             aligned.  That is, bits 0-12 of the address must be zero.
+        * Assumption: 32-bit physical address of descriptor block
+        *       is 8Kbyte aligned.
         */
-
-       if (dfx_hw_port_ctrl_req(bp,
-                                                       PI_PCTRL_M_INIT,
-                                                       (u32) 
(bp->descr_block_phys | PI_PDATA_A_INIT_M_BSWAP_DATA),
-                                                       0,
-                                                       NULL) != DFX_K_SUCCESS)
-               {
-               printk("%s: Could not set descriptor block address!\n", 
bp->dev->name);
-               return(DFX_K_FAILURE);
-               }
+       if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT,
+                                (u32)(bp->descr_block_phys |
+                                      PI_PDATA_A_INIT_M_BSWAP_INIT),
+                                0, NULL) != DFX_K_SUCCESS) {
+               printk("%s: Could not set descriptor block address!\n",
+                      bp->dev->name);
+               return DFX_K_FAILURE;
+       }
 
        /* Set transmit flush timeout value */
 
diff -up --recursive --new-file 
linux-mips-2.6.18-20060920.macro/drivers/net/defxx.h 
linux-mips-2.6.18-20060920/drivers/net/defxx.h
--- linux-mips-2.6.18-20060920.macro/drivers/net/defxx.h        2004-11-16 
05:57:00.000000000 +0000
+++ linux-mips-2.6.18-20060920/drivers/net/defxx.h      2006-10-23 
00:27:28.000000000 +0000
@@ -25,6 +25,7 @@
  *                                                     macros to DEFXX.C.
  *             12-Sep-96       LVS             Removed packet request header 
pointers.
  *             04 Aug 2003     macro           Converted to the DMA API.
+ *             23 Oct 2006     macro           Big-endian host support.
  */
 
 #ifndef _DEFXX_H_
@@ -1344,7 +1345,7 @@ typedef struct
 
 /* Register definition structures are defined for both big and little endian 
systems */
 
-#ifndef  BIG_ENDIAN
+#ifndef __BIG_ENDIAN
 
 /* Little endian format of Type 1 Producer register */
 
@@ -1402,7 +1403,11 @@ typedef union
                } index;
        } PI_TYPE_2_CONSUMER;
 
-#else
+/* Define swapping required by DMA transfers.  */
+#define PI_PDATA_A_INIT_M_BSWAP_INIT   \
+       (PI_PDATA_A_INIT_M_BSWAP_DATA)
+
+#else /* __BIG_ENDIAN */
 
 /* Big endian format of Type 1 Producer register */
 
@@ -1460,7 +1465,11 @@ typedef union
                } index;
        } PI_TYPE_2_CONSUMER;
 
-#endif /* #ifndef BIG_ENDIAN */
+/* Define swapping required by DMA transfers.  */
+#define PI_PDATA_A_INIT_M_BSWAP_INIT   \
+       (PI_PDATA_A_INIT_M_BSWAP_DATA | PI_PDATA_A_INIT_M_BSWAP_LITERAL)
+
+#endif /* __BIG_ENDIAN */
 
 /* Define EISA controller register offsets */
 
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to