From: Aleksey Makarov <amaka...@marvell.com>
This patch adds mailbox support infrastructure APIs.
Each RVU device has a dedicated 64KB mailbox region
shared with it's peer for communication. RVU AF has
a separate mailbox region shared with each of RVU PFs
and a RVU PF has a separate region shared with each of
it's VF.
These set of APIs are used by this driver (RVU AF) and
other RVU PF/VF drivers eg netdev, crypto e.t.c.
Signed-off-by: Aleksey Makarov <amaka...@marvell.com>
Signed-off-by: Sunil Goutham <sgout...@marvell.com>
Signed-off-by: Lukasz Bartosik <lbarto...@marvell.com>
---
drivers/net/ethernet/marvell/octeontx2/Kconfig | 4 +
drivers/net/ethernet/marvell/octeontx2/af/Makefile | 2 +
drivers/net/ethernet/marvell/octeontx2/af/mbox.c | 303 +++++++++++++++++++++
drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 142 ++++++++++
.../net/ethernet/marvell/octeontx2/af/rvu_reg.h | 4 +
5 files changed, 455 insertions(+)
create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mbox.c
create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/mbox.h
diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig
b/drivers/net/ethernet/marvell/octeontx2/Kconfig
index 9743502..8002f9c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -2,8 +2,12 @@
# Marvell OcteonTX2 drivers configuration
#
+config OCTEONTX2_MBOX
+ tristate
+
config OCTEONTX2_AF
tristate "Marvell OcteonTX2 RVU Admin Function driver"
+ select OCTEONTX2_MBOX
depends on ARM64 && PCI
help
This driver supports Marvell's OcteonTX2 Resource Virtualization
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/Makefile
b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
index dacbd16..ac17cb9 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/Makefile
+++ b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
@@ -3,6 +3,8 @@
# Makefile for Marvell's OcteonTX2 RVU Admin Function driver
#
+obj-$(CONFIG_OCTEONTX2_MBOX) += octeontx2_mbox.o
obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
+octeontx2_mbox-y := mbox.o
octeontx2_af-y := rvu.o
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
b/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
new file mode 100644
index 0000000..e260950
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+#include "rvu_reg.h"
+#include "mbox.h"
+
+static const u16 msgs_offset = ALIGN(sizeof(struct mbox_hdr), MBOX_MSG_ALIGN);
+
+void otx2_mbox_reset(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_hdr *tx_hdr, *rx_hdr;
+
+ tx_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->tx_start);
+ rx_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+
+ spin_lock(&mdev->mbox_lock);
+ mdev->msg_size = 0;
+ mdev->rsp_size = 0;
+ tx_hdr->num_msgs = 0;
+ rx_hdr->num_msgs = 0;
+ spin_unlock(&mdev->mbox_lock);
+}
+EXPORT_SYMBOL(otx2_mbox_reset);
+
+void otx2_mbox_destroy(struct otx2_mbox *mbox)
+{
+ mbox->reg_base = NULL;
+ mbox->hwbase = NULL;
+
+ kfree(mbox->dev);
+ mbox->dev = NULL;
+}
+EXPORT_SYMBOL(otx2_mbox_destroy);
+
+int otx2_mbox_init(struct otx2_mbox *mbox, void *hwbase, struct pci_dev *pdev,
+ void *reg_base, int direction, int ndevs)
+{
+ struct otx2_mbox_dev *mdev;
+ int devid;
+
+ switch (direction) {
+ case MBOX_DIR_AFPF:
+ case MBOX_DIR_PFVF:
+ mbox->tx_start = MBOX_DOWN_TX_START;
+ mbox->rx_start = MBOX_DOWN_RX_START;
+ mbox->tx_size = MBOX_DOWN_TX_SIZE;
+ mbox->rx_size = MBOX_DOWN_RX_SIZE;
+ break;
+ case MBOX_DIR_PFAF:
+ case MBOX_DIR_VFPF:
+ mbox->tx_start = MBOX_DOWN_RX_START;
+ mbox->rx_start = MBOX_DOWN_TX_START;
+ mbox->tx_size = MBOX_DOWN_RX_SIZE;
+ mbox->rx_size = MBOX_DOWN_TX_SIZE;
+ break;
+ case MBOX_DIR_AFPF_UP:
+ case MBOX_DIR_PFVF_UP:
+ mbox->tx_start = MBOX_UP_TX_START;
+ mbox->rx_start = MBOX_UP_RX_START;
+ mbox->tx_size = MBOX_UP_TX_SIZE;
+ mbox->rx_size = MBOX_UP_RX_SIZE;
+ break;
+ case MBOX_DIR_PFAF_UP:
+ case MBOX_DIR_VFPF_UP:
+ mbox->tx_start = MBOX_UP_RX_START;
+ mbox->rx_start = MBOX_UP_TX_START;
+ mbox->tx_size = MBOX_UP_RX_SIZE;
+ mbox->rx_size = MBOX_UP_TX_SIZE;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ switch (direction) {
+ case MBOX_DIR_AFPF:
+ case MBOX_DIR_AFPF_UP:
+ mbox->trigger = RVU_AF_AFPF_MBOX0;
+ mbox->tr_shift = 4;
+ break;
+ case MBOX_DIR_PFAF:
+ case MBOX_DIR_PFAF_UP:
+ mbox->trigger = RVU_PF_PFAF_MBOX1;
+ mbox->tr_shift = 0;
+ break;
+ case MBOX_DIR_PFVF:
+ case MBOX_DIR_PFVF_UP:
+ mbox->trigger = RVU_PF_VFX_PFVF_MBOX0;
+ mbox->tr_shift = 12;
+ break;
+ case MBOX_DIR_VFPF:
+ case MBOX_DIR_VFPF_UP:
+ mbox->trigger = RVU_VF_VFPF_MBOX1;
+ mbox->tr_shift = 0;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ mbox->reg_base = reg_base;
+ mbox->hwbase = hwbase;
+ mbox->pdev = pdev;
+
+ mbox->dev = kcalloc(ndevs, sizeof(struct otx2_mbox_dev), GFP_KERNEL);
+ if (!mbox->dev) {
+ otx2_mbox_destroy(mbox);
+ return -ENOMEM;
+ }
+
+ mbox->ndevs = ndevs;
+ for (devid = 0; devid < ndevs; devid++) {
+ mdev = &mbox->dev[devid];
+ mdev->mbase = mbox->hwbase + (devid * MBOX_SIZE);
+ spin_lock_init(&mdev->mbox_lock);
+ /* Init header to reset value */
+ otx2_mbox_reset(mbox, devid);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(otx2_mbox_init);
+
+int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ int timeout = 0, sleep = 1;
+
+ while (mdev->num_msgs != mdev->msgs_acked) {
+ msleep(sleep);
+ timeout += sleep;
+ if (timeout >= MBOX_RSP_TIMEOUT)
+ return -EIO;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(otx2_mbox_wait_for_rsp);
+
+int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ unsigned long timeout = jiffies + 1 * HZ;
+
+ while (!time_after(jiffies, timeout)) {
+ if (mdev->num_msgs == mdev->msgs_acked)
+ return 0;
+ cpu_relax();
+ }
+ return -EIO;
+}
+EXPORT_SYMBOL(otx2_mbox_busy_poll_for_rsp);
+
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_hdr *tx_hdr, *rx_hdr;
+
+ tx_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->tx_start);
+ rx_hdr = (struct mbox_hdr *)(mdev->mbase + mbox->rx_start);
+
+ spin_lock(&mdev->mbox_lock);
+ /* Reset header for next messages */
+ mdev->msg_size = 0;
+ mdev->rsp_size = 0;
+ mdev->msgs_acked = 0;
+
+ /* Sync mbox data into memory */
+ smp_wmb();
+
+ /* num_msgs != 0 signals to the peer that the buffer has a number of
+ * messages. So this should be written after writing all the messages
+ * to the shared memory.
+ */
+ tx_hdr->num_msgs = mdev->num_msgs;
+ rx_hdr->num_msgs = 0;
+ spin_unlock(&mdev->mbox_lock);
+
+ /* The interrupt should be fired after num_msgs is written
+ * to the shared memory
+ */
+ writeq(1, (void __iomem *)mbox->reg_base +
+ (mbox->trigger | (devid << mbox->tr_shift)));
+}
+EXPORT_SYMBOL(otx2_mbox_msg_send);
+
+struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
+ int size, int size_rsp)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ struct mbox_msghdr *msghdr = NULL;
+
+ spin_lock(&mdev->mbox_lock);
+ size = ALIGN(size, MBOX_MSG_ALIGN);
+ size_rsp = ALIGN(size_rsp, MBOX_MSG_ALIGN);
+ /* Check if there is space in mailbox */
+ if ((mdev->msg_size + size) > mbox->tx_size - msgs_offset)
+ goto exit;
+ if ((mdev->rsp_size + size_rsp) > mbox->rx_size - msgs_offset)
+ goto exit;
+
+ if (mdev->msg_size == 0)
+ mdev->num_msgs = 0;
+ mdev->num_msgs++;
+
+ msghdr = (struct mbox_msghdr *)(mdev->mbase + mbox->tx_start +
+ msgs_offset + mdev->msg_size);
+ /* Clear the whole msg region */
+ memset(msghdr, 0, sizeof(*msghdr) + size);
+ /* Init message header with reset values */
+ msghdr->ver = OTX2_MBOX_VERSION;
+ mdev->msg_size += size;
+ mdev->rsp_size += size_rsp;
+ msghdr->next_msgoff = mdev->msg_size + msgs_offset;
+exit:
+ spin_unlock(&mdev->mbox_lock);
+
+ return msghdr;
+}
+EXPORT_SYMBOL(otx2_mbox_alloc_msg_rsp);
+
+struct mbox_msghdr *otx2_mbox_get_rsp(struct otx2_mbox *mbox, int devid,
+ struct mbox_msghdr *msg)
+{
+ unsigned long imsg = mbox->tx_start + msgs_offset;
+ unsigned long irsp = mbox->rx_start + msgs_offset;
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ u16 msgs;
+
+ if (mdev->num_msgs != mdev->msgs_acked)
+ return ERR_PTR(-ENODEV);
+
+ for (msgs = 0; msgs < mdev->msgs_acked; msgs++) {
+ struct mbox_msghdr *pmsg = mdev->mbase + imsg;
+ struct mbox_msghdr *prsp = mdev->mbase + irsp;
+
+ if (msg == pmsg) {
+ if (pmsg->id != prsp->id)
+ return ERR_PTR(-ENODEV);
+ return prsp;
+ }
+
+ imsg = pmsg->next_msgoff;
+ irsp = prsp->next_msgoff;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(otx2_mbox_get_rsp);
+
+int
+otx2_reply_invalid_msg(struct otx2_mbox *mbox, int devid, u16 pcifunc, u16 id)
+{
+ struct msg_rsp *rsp;
+
+ rsp = (struct msg_rsp *)
+ otx2_mbox_alloc_msg(mbox, devid, sizeof(*rsp));
+ if (!rsp)
+ return -ENOMEM;
+ rsp->hdr.id = id;
+ rsp->hdr.sig = OTX2_MBOX_RSP_SIG;
+ rsp->hdr.rc = MBOX_MSG_INVALID;
+ rsp->hdr.pcifunc = pcifunc;
+ return 0;
+}
+EXPORT_SYMBOL(otx2_reply_invalid_msg);
+
+bool otx2_mbox_nonempty(struct otx2_mbox *mbox, int devid)
+{
+ struct otx2_mbox_dev *mdev = &mbox->dev[devid];
+ bool ret;
+
+ spin_lock(&mdev->mbox_lock);
+ ret = mdev->num_msgs != 0;
+ spin_unlock(&mdev->mbox_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(otx2_mbox_nonempty);
+
+const char *otx2_mbox_id2name(u16 id)
+{
+ switch (id) {
+#define M(_name, _id, _1, _2) case _id: return # _name;
+ MBOX_MESSAGES
+#undef M
+ default:
+ return "INVALID ID";
+ }
+}
+EXPORT_SYMBOL(otx2_mbox_id2name);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
new file mode 100644
index 0000000..8e205fd
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Marvell OcteonTx2 RVU Admin Function driver
+ *
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MBOX_H
+#define MBOX_H
+
+#include <linux/etherdevice.h>
+#include <linux/sizes.h>
+
+#include "rvu_struct.h"
+
+#define MBOX_SIZE SZ_64K
+
+/* AF/PF: PF initiated, PF/VF VF initiated */
+#define MBOX_DOWN_RX_START 0
+#define MBOX_DOWN_RX_SIZE (46 * SZ_1K)
+#define MBOX_DOWN_TX_START (MBOX_DOWN_RX_START + MBOX_DOWN_RX_SIZE)
+#define MBOX_DOWN_TX_SIZE (16 * SZ_1K)
+/* AF/PF: AF initiated, PF/VF PF initiated */
+#define MBOX_UP_RX_START (MBOX_DOWN_TX_START + MBOX_DOWN_TX_SIZE)
+#define MBOX_UP_RX_SIZE SZ_1K
+#define MBOX_UP_TX_START (MBOX_UP_RX_START + MBOX_UP_RX_SIZE)
+#define MBOX_UP_TX_SIZE SZ_1K
+
+#if MBOX_UP_TX_SIZE + MBOX_UP_TX_START != MBOX_SIZE
+# error "incorrect mailbox area sizes"
+#endif
+
+#define MBOX_RSP_TIMEOUT 1000 /* in ms, Time to wait for mbox response */
+
+#define MBOX_MSG_ALIGN 16 /* Align mbox msg start to 16bytes */
+
+/* Mailbox directions */
+#define MBOX_DIR_AFPF 0 /* AF replies to PF */
+#define MBOX_DIR_PFAF 1 /* PF sends messages to AF */
+#define MBOX_DIR_PFVF 2 /* PF replies to VF */
+#define MBOX_DIR_VFPF 3 /* VF sends messages to PF */
+#define MBOX_DIR_AFPF_UP 4 /* AF sends messages to PF */
+#define MBOX_DIR_PFAF_UP 5 /* PF replies to AF */
+#define MBOX_DIR_PFVF_UP 6 /* PF sends messages to VF */
+#define MBOX_DIR_VFPF_UP 7 /* VF replies to PF */
+
+struct otx2_mbox_dev {
+ void *mbase; /* This dev's mbox region */
+ spinlock_t mbox_lock;
+ u16 msg_size; /* Total msg size to be sent */
+ u16 rsp_size; /* Total rsp size to be sure the reply is ok */
+ u16 num_msgs; /* No of msgs sent or waiting for response */
+ u16 msgs_acked; /* No of msgs for which response is received */
+};
+
+struct otx2_mbox {
+ struct pci_dev *pdev;
+ void *hwbase; /* Mbox region advertised by HW */
+ void *reg_base;/* CSR base for this dev */
+ u64 trigger; /* Trigger mbox notification */
+ u16 tr_shift; /* Mbox trigger shift */
+ u64 rx_start; /* Offset of Rx region in mbox memory */
+ u64 tx_start; /* Offset of Tx region in mbox memory */
+ u16 rx_size; /* Size of Rx region */
+ u16 tx_size; /* Size of Tx region */
+ u16 ndevs; /* The number of peers */
+ struct otx2_mbox_dev *dev;
+};
+
+/* Header which preceeds all mbox messages */
+struct mbox_hdr {
+ u16 num_msgs; /* No of msgs embedded */
+};
+
+/* Header which preceeds every msg and is also part of it */
+struct mbox_msghdr {
+ u16 pcifunc; /* Who's sending this msg */
+ u16 id; /* Mbox message ID */
+#define OTX2_MBOX_REQ_SIG (0xdead)
+#define OTX2_MBOX_RSP_SIG (0xbeef)
+ u16 sig; /* Signature, for validating corrupted msgs */
+#define OTX2_MBOX_VERSION (0x0001)
+ u16 ver; /* Version of msg's structure for this ID */
+ u16 next_msgoff; /* Offset of next msg within mailbox region */
+ int rc; /* Msg process'ed response code */
+};
+
+void otx2_mbox_reset(struct otx2_mbox *mbox, int devid);
+void otx2_mbox_destroy(struct otx2_mbox *mbox);
+int otx2_mbox_init(struct otx2_mbox *mbox, void *hwbase, struct pci_dev *pdev,
+ void *reg_base, int direction, int ndevs);
+void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid);
+int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid);
+int otx2_mbox_busy_poll_for_rsp(struct otx2_mbox *mbox, int devid);
+struct mbox_msghdr *otx2_mbox_alloc_msg_rsp(struct otx2_mbox *mbox, int devid,
+ int size, int size_rsp);
+struct mbox_msghdr *otx2_mbox_get_rsp(struct otx2_mbox *mbox, int devid,
+ struct mbox_msghdr *msg);
+int otx2_reply_invalid_msg(struct otx2_mbox *mbox, int devid,
+ u16 pcifunc, u16 id);
+bool otx2_mbox_nonempty(struct otx2_mbox *mbox, int devid);
+const char *otx2_mbox_id2name(u16 id);
+static inline struct mbox_msghdr *otx2_mbox_alloc_msg(struct otx2_mbox *mbox,
+ int devid, int size)
+{
+ return otx2_mbox_alloc_msg_rsp(mbox, devid, size, 0);
+}
+
+/* Mailbox message types */
+#define MBOX_MSG_MASK 0xFFFF
+#define MBOX_MSG_INVALID 0xFFFE
+#define MBOX_MSG_MAX 0xFFFF
+
+#define MBOX_MESSAGES \
+M(READY, 0x001, msg_req, msg_rsp)
+
+enum {
+#define M(_name, _id, _1, _2) MBOX_MSG_ ## _name = _id,
+MBOX_MESSAGES
+#undef M
+};
+
+/* Mailbox message formats */
+
+/* Generic request msg used for those mbox messages which
+ * don't send any data in the request.
+ */
+struct msg_req {
+ struct mbox_msghdr hdr;
+};
+
+/* Generic rsponse msg used a ack or response for those mbox
+ * messages which doesn't have a specific rsp msg format.
+ */
+struct msg_rsp {
+ struct mbox_msghdr hdr;
+};
+
+#endif /* MBOX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index bbeed77..0d69ec0 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -101,6 +101,10 @@
#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+/* RVU VF registers */
+#define RVU_VF_VFPF_MBOX0 (0x00000)
+#define RVU_VF_VFPF_MBOX1 (0x00008)
+
/* NPA block's admin function registers */
#define NPA_AF_BLK_RST (0x0000)
#define NPA_AF_CONST (0x0010)
--
2.7.4
