On 17.10.2018 21:11, Holger Hoffstätte wrote:
> On 10/17/18 20:12, Heiner Kallweit wrote:
>> On 16.10.2018 23:17, Holger Hoffstätte wrote:
>>> On 10/16/18 22:37, Heiner Kallweit wrote:
>>>> rtl_rx() and rtl_tx() are called only if the respective bits are set
>>>> in the interrupt status register. Under high load NAPI may not be
>>>> able to process all data (work_done == budget) and it will schedule
>>>> subsequent calls to the poll callback.
>>>> rtl_ack_events() however resets the bits in the interrupt status
>>>> register, therefore subsequent calls to rtl8169_poll() won't call
>>>> rtl_rx() and rtl_tx() - chip interrupts are still disabled.
>>>
>>> Very interesting! Could this be the reason for the mysterious
>>> hangs & resets we experienced when enabling BQL for r8169?
>>> They happened more often with TSO/GSO enabled and several people
>>> attempted to fix those hangs unsuccessfully; it was later reverted
>>> and has been since then (#87cda7cb43).
>>> If this bug has been there "forever" it might be tempting to
>>> re-apply BQL and see what happens. Any chance you could give that
>>> a try? I'll gladly test patches, just like I'll run this one.
>>>
>> After reading through the old mail threads regarding BQL on r8169
>> I don't think the fix here is related.
>> It seems that BQL on r8169 worked fine for most people, just one
>> had problems on one of his systems. I assume the issue was specific
>
> I continued to use the BQL patch in my private tree after it was reverted
> and also had occasional timeouts, but *only* after I started playing
> with ethtool to change offload settings. Without offloads or the BQL patch
> everything has been rock-solid since then.
> The other weird problem was that timeouts would occur on an otherwise
> *completely idle* system. Since that occasionally borked my NFS server
> over night I ultimately removed BQL as well. Rock-solid since then.
>
>> I will apply the old BQL patch and see how it's on my system
>> (with GRO and SG enabled).
>
> I don't think it still applies cleanly, but if you cook up an updated
> version I'll gladly test it.
>
> Thanks! :)
> Holger
>
Good to know. What's your kernel version and RTL8168 chip version?
Regarding the chip version the dmesg line with the XID would be relevant.
Below is the slightly modified original BQL patch, I just moved the call
to netdev_reset_queue(). This patch applies at least to latest linux-next.
My test system:
- RTL8168evl
- latest linux-next
- BQL patch applied
- SG/GRO enabled:
rx-checksumming: on
tx-checksumming: on
tx-checksum-ipv4: on
tx-checksum-ip-generic: off [fixed]
tx-checksum-ipv6: on
tx-checksum-fcoe-crc: off [fixed]
tx-checksum-sctp: off [fixed]
scatter-gather: on
tx-scatter-gather: on
tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: off [fixed]
tx-tcp-mangleid-segmentation: on
tx-tcp6-segmentation: on
udp-fragmentation-offload: off
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off [fixed]
rx-vlan-offload: on
tx-vlan-offload: on
I briefly tested normal operation and did some tests with iperf3.
Everything looks good so far.
---
drivers/net/ethernet/realtek/r8169.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c
b/drivers/net/ethernet/realtek/r8169.c
index 0d8070adc..e236b46b8 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5852,6 +5852,7 @@ static void rtl8169_tx_clear(struct rtl8169_private *tp)
{
rtl8169_tx_clear_range(tp, tp->dirty_tx, NUM_TX_DESC);
tp->cur_tx = tp->dirty_tx = 0;
+ netdev_reset_queue(tp->dev);
}
static void rtl_reset_work(struct rtl8169_private *tp)
@@ -6154,6 +6155,8 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
txd->opts2 = cpu_to_le32(opts[1]);
+ netdev_sent_queue(dev, skb->len);
+
skb_tx_timestamp(skb);
/* Force memory writes to complete before releasing descriptor */
@@ -6252,7 +6255,7 @@ static void rtl8169_pcierr_interrupt(struct net_device
*dev)
static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp)
{
- unsigned int dirty_tx, tx_left;
+ unsigned int dirty_tx, tx_left, bytes_compl = 0, pkts_compl = 0;
dirty_tx = tp->dirty_tx;
smp_rmb();
@@ -6276,10 +6279,8 @@ static void rtl_tx(struct net_device *dev, struct
rtl8169_private *tp)
rtl8169_unmap_tx_skb(tp_to_dev(tp), tx_skb,
tp->TxDescArray + entry);
if (status & LastFrag) {
- u64_stats_update_begin(&tp->tx_stats.syncp);
- tp->tx_stats.packets++;
- tp->tx_stats.bytes += tx_skb->skb->len;
- u64_stats_update_end(&tp->tx_stats.syncp);
+ pkts_compl++;
+ bytes_compl += tx_skb->skb->len;
dev_consume_skb_any(tx_skb->skb);
tx_skb->skb = NULL;
}
@@ -6288,6 +6289,13 @@ static void rtl_tx(struct net_device *dev, struct
rtl8169_private *tp)
}
if (tp->dirty_tx != dirty_tx) {
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
+ u64_stats_update_begin(&tp->tx_stats.syncp);
+ tp->tx_stats.packets += pkts_compl;
+ tp->tx_stats.bytes += bytes_compl;
+ u64_stats_update_end(&tp->tx_stats.syncp);
+
tp->dirty_tx = dirty_tx;
/* Sync with rtl8169_start_xmit:
* - publish dirty_tx ring index (write barrier)
--
2.19.1
