[PATCH net-next 1/3] net: dsa: bcm_sf2: Turn on PHY to allow successful registration

[Florian Fainelli]

We are binding to the PHY using the SF2 slave MDIO bus that we create,
binding involves reading the PHY's MII_PHYSID1/2 which won't be possible
if the PHY is turned off. Temporarily turn it on/off for the bus probing
to succeeed. This fixes unbind/bind problems where the port connecting
to that PHY would be in error since it could not connect to it.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 2eb68769562c..2c664aac1e7b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1090,12 +1090,16 @@ static int bcm_sf2_sw_probe(struct platform_device 
*pdev)
                return ret;
        }
 
+       bcm_sf2_gphy_enable_set(priv->dev->ds, true);
+
        ret = bcm_sf2_mdio_register(ds);
        if (ret) {
                pr_err("failed to register MDIO bus\n");
                return ret;
        }
 
+       bcm_sf2_gphy_enable_set(priv->dev->ds, false);
+
        ret = bcm_sf2_cfp_rst(priv);
        if (ret) {
                pr_err("failed to reset CFP\n");
-- 
2.17.1