sky2 from debian etch kernel (2.6.17-2) has stopped today after quite
big amount of traffic transferred (30MB/sec for about 3-4 hours).
rmmod/insmod does not help, reboot required.
Here is dmesg output:
Oct 31 06:40:07 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:40:07 kano kernel: sky2 eth0: tx timeout
Oct 31 06:40:07 kano kernel: sky2 eth0: transmit ring 198 .. 175 report=221
done=221
Oct 31 06:40:07 kano kernel: sky2 status report lost?
Oct 31 06:40:42 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:40:42 kano kernel: sky2 eth0: tx timeout
Oct 31 06:40:42 kano kernel: sky2 eth0: transmit ring 221 .. 198 report=221
done=221
Oct 31 06:40:42 kano kernel: sky2 hardware hung? flushing
Oct 31 06:54:07 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:54:07 kano kernel: sky2 eth0: tx timeout
Oct 31 06:54:07 kano kernel: sky2 eth0: transmit ring 198 .. 175 report=221
done=221
Oct 31 06:54:07 kano kernel: sky2 status report lost?
Oct 31 06:54:42 kano kernel: NETDEV WATCHDOG: eth0: transmit timed out
Oct 31 06:54:42 kano kernel: sky2 eth0: tx timeout
Oct 31 06:54:42 kano kernel: sky2 eth0: transmit ring 221 .. 198 report=221
done=221
Oct 31 06:54:42 kano kernel: sky2 hardware hung? flushing
And here is rmmod/insmod dmesg:
Oct 31 08:58:19 kano kernel: sky2 eth0: disabling interface
Oct 31 08:59:00 kano kernel: ACPI: PCI interrupt for device 0000:05:00.0
disabled
Oct 31 08:59:21 kano kernel: ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKD]
-> GSI 18 (level, low) -> IRQ 98
Oct 31 08:59:21 kano kernel: PCI: Setting latency timer of device 0000:05:00.0
to 64
Oct 31 08:59:21 kano kernel: sky2 v1.6.1 addr 0xfbefc000 irq 98 Yukon-EC (0xb6)
rev 2
Oct 31 08:59:21 kano kernel: sky2 eth0: addr 00:17:31:9a:e5:be
Oct 31 08:59:21 kano kernel: sky2 eth0: enabling interface
Oct 31 08:59:21 kano kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 31 08:59:23 kano kernel: sky2 eth0: Link is up at 1000 Mbps, full duplex,
flow control both
Oct 31 08:59:23 kano kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--
Evgeniy Polyakov
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
