The patch inlined below adds NET_POLL_CONTROLLER support for gianfar network
driver, slightly modified wrt the comments from Andy Fleming.
drivers/net/gianfar.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
Signed-off-by: Vitaly Wool <[EMAIL PROTECTED]>
Index: powerpc/drivers/net/gianfar.c
===================================================================
--- powerpc.orig/drivers/net/gianfar.c
+++ powerpc/drivers/net/gianfar.c
@@ -133,6 +133,9 @@ static void gfar_set_hash_for_addr(struc
#ifdef CONFIG_GFAR_NAPI
static int gfar_poll(struct net_device *dev, int *budget);
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void gfar_netpoll(struct net_device *dev);
+#endif
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int
length);
static void gfar_vlan_rx_register(struct net_device *netdev,
@@ -260,6 +263,9 @@ static int gfar_probe(struct platform_de
dev->poll = gfar_poll;
dev->weight = GFAR_DEV_WEIGHT;
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = gfar_netpoll;
+#endif
dev->stop = gfar_close;
dev->get_stats = gfar_get_stats;
dev->change_mtu = gfar_change_mtu;
@@ -1536,6 +1542,33 @@ static int gfar_poll(struct net_device *
}
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void gfar_netpoll(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+
+ /* If the device has multiple interrupts, run tx/rx */
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
+ disable_irq(priv->interruptTransmit);
+ disable_irq(priv->interruptReceive);
+ disable_irq(priv->interruptError);
+ gfar_interrupt(priv->interruptTransmit, dev);
+ enable_irq(priv->interruptError);
+ enable_irq(priv->interruptReceive);
+ enable_irq(priv->interruptTransmit);
+ } else {
+ disable_irq(priv->interruptTransmit);
+ gfar_interrupt(priv->interruptTransmit, dev);
+ enable_irq(priv->interruptTransmit);
+ }
+}
+#endif
+
/* The interrupt handler for devices with one interrupt */
static irqreturn_t gfar_interrupt(int irq, void *dev_id)
{
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
