Both one-bit bitfields have been subsumed into the new 'flags'
structure member and the new IEEE80211_TX_STATUS_* definitions.
Signed-off-by: David Kimdon <[EMAIL PROTECTED]>
Index: wireless-dev/include/net/d80211.h
===================================================================
--- wireless-dev.orig/include/net/d80211.h
+++ wireless-dev/include/net/d80211.h
@@ -211,8 +211,10 @@ struct ieee80211_tx_status {
/* copied ieee80211_tx_control structure */
struct ieee80211_tx_control control;
- unsigned int tx_filtered:1;
- unsigned int ack:1; /* whether the TX frame was ACKed */
+#define IEEE80211_TX_STATUS_TX_FILTERED (1<<0)
+#define IEEE80211_TX_STATUS_ACK (1<<1) /* whether the TX frame
was ACKed */
+ u32 flags; /* tx staus flags defined above */
+
int ack_signal; /* measured signal strength of the ACK frame */
int excessive_retries;
int retry_count;
Index: wireless-dev/drivers/net/wireless/d80211/adm8211/adm8211.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/adm8211/adm8211.c
+++ wireless-dev/drivers/net/wireless/d80211/adm8211/adm8211.c
@@ -428,12 +428,14 @@ static void adm8211_interrupt_tci(struct
if (status & TDES0_STATUS_ES) {
stats->tx_errors++;
- priv->tx_buffers[entry].tx_status.ack = 0;
+ priv->tx_buffers[entry].tx_status.flags &=
+ ~IEEE80211_TX_STATUS_ACK;
if (status & (TDES0_STATUS_TUF | TDES0_STATUS_TRO))
stats->tx_fifo_errors++;
} else
- priv->tx_buffers[entry].tx_status.ack = 1;
+ priv->tx_buffers[entry].tx_status.flags |=
+ IEEE80211_TX_STATUS_ACK;
pci_unmap_single(priv->pdev, priv->tx_buffers[entry].mapping,
priv->tx_buffers[entry].skb->len,
PCI_DMA_TODEVICE);
Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c
+++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_dma.c
@@ -1127,7 +1127,8 @@ void bcm43xx_dma_handle_txstatus(struct
* status of the transmission.
* Some fields of txstat are already filled in dma_tx().
*/
- meta->txstat.ack = status->acked;
+ if (status->acked)
+ meta->txstat.flags |= IEEE80211_TX_STATUS_ACK;
meta->txstat.retry_count = status->frame_count - 1;
ieee80211_tx_status_irqsafe(bcm->net_dev, meta->skb,
&(meta->txstat));
/* skb is freed by ieee80211_tx_status_irqsafe() */
Index: wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c
+++ wireless-dev/drivers/net/wireless/d80211/bcm43xx/bcm43xx_pio.c
@@ -500,7 +500,8 @@ void bcm43xx_pio_handle_txstatus(struct
queue->tx_devq_packets--;
queue->tx_devq_used -= (packet->skb->len + phy->txhdr_size);
- packet->txstat.ack = status->acked;
+ if (status->acked)
+ packet->txstat.flags |= IEEE80211_TX_STATUS_ACK;
packet->txstat.retry_count = status->frame_count - 1;
ieee80211_tx_status_irqsafe(bcm->net_dev, packet->skb,
&(packet->txstat));
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2400pci.c
@@ -1749,10 +1749,11 @@ static void rt2400pci_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1764,11 +1765,10 @@ static void rt2400pci_txdone(void *data)
* was succesfull.
*/
tx_status = rt2x00_get_field32(txd->word0, TXD_W0_RESULT);
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (tx_status == TX_SUCCESS ||
tx_status == TX_SUCCESS_RETRY))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && tx_status == TX_FAIL_RETRY) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500pci.c
@@ -1898,10 +1898,11 @@ static void rt2500pci_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can the IEEE80211_TX_STATUS_TX_FILTERED bit of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1913,11 +1914,10 @@ static void rt2500pci_txdone(void *data)
* was succesfull.
*/
tx_status = rt2x00_get_field32(txd->word0, TXD_W0_RESULT);
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (tx_status == TX_SUCCESS ||
tx_status == TX_SUCCESS_RETRY))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && tx_status == TX_FAIL_RETRY) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/net/d80211/ieee80211.c
===================================================================
--- wireless-dev.orig/net/d80211/ieee80211.c
+++ wireless-dev/net/d80211/ieee80211.c
@@ -4047,13 +4047,13 @@ void ieee80211_tx_status(struct net_devi
* that this TX packet failed because of that.
*/
status->excessive_retries = 0;
- status->tx_filtered = 1;
+ status->flags |=
IEEE80211_TX_STATUS_TX_FILTERED;
}
sta_info_put(sta);
}
}
- if (status->tx_filtered) {
+ if (status->flags & IEEE80211_TX_STATUS_TX_FILTERED) {
struct sta_info *sta;
sta = sta_info_get(local, hdr->addr1);
if (sta) {
@@ -4115,7 +4115,7 @@ void ieee80211_tx_status(struct net_devi
frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
- if (status->ack) {
+ if (status->flags & IEEE80211_TX_STATUS_ACK) {
if (frag == 0) {
local->dot11TransmittedFrameCount++;
if (is_multicast_ether_addr(hdr->addr1))
@@ -4144,8 +4144,8 @@ void ieee80211_tx_status(struct net_devi
return;
}
- msg_type = status->ack ? ieee80211_msg_tx_callback_ack :
- ieee80211_msg_tx_callback_fail;
+ msg_type = (status->flags & IEEE80211_TX_STATUS_ACK) ?
+ ieee80211_msg_tx_callback_ack : ieee80211_msg_tx_callback_fail;
/* skb was the original skb used for TX. Clone it and give the clone
* to netif_rx(). Free original skb. */
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt61pci.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt61pci.c
@@ -2334,10 +2334,11 @@ static void rt61pci_txdone_entry(struct
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can the IEEE80211_TX_STATUS_TX_FILTERED bit of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = entry->ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -2349,11 +2350,10 @@ static void rt61pci_txdone_entry(struct
* was succesfull.
*/
tx_status = rt2x00_get_field32(sta_csr4, STA_CSR4_TX_RESULT);
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (tx_status == TX_SUCCESS ||
tx_status == TX_SUCCESS_RETRY))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && tx_status == TX_FAIL_RETRY) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt2500usb.c
@@ -1686,10 +1686,11 @@ static void rt2500usb_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = entry->ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1699,10 +1700,9 @@ static void rt2500usb_txdone(void *data)
* ACK response when ACK was requested and status
* was succesfull.
*/
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (urb->status == TX_SUCCESS))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else if (ack && urb->status == TX_FAIL_OTHER) {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/rt2x00/rt73usb.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/rt2x00/rt73usb.c
+++ wireless-dev/drivers/net/wireless/d80211/rt2x00/rt73usb.c
@@ -1976,10 +1976,11 @@ static void rt73usb_txdone(void *data)
ack = rt2x00_get_field32(txd->word0, TXD_W0_ACK);
+ entry->tx_status.flags = 0;
/*
- * TODO: How can te below field be set correctly?
+ * TODO: How can bit IEEE80211_TX_STATUS_TX_FILTERED of
+ * entry->tx_status.flags be set correctly?
*/
- entry->tx_status.tx_filtered = 0;
entry->tx_status.queue_length = entry->ring->stats.limit;
entry->tx_status.queue_number = entry->tx_status.control.queue;
@@ -1989,10 +1990,9 @@ static void rt73usb_txdone(void *data)
* ACK response when ACK was requested and status
* was succesfull.
*/
- entry->tx_status.ack = 0;
entry->tx_status.excessive_retries = 0;
if (ack && (urb->status == TX_SUCCESS))
- entry->tx_status.ack = 1;
+ entry->tx_status.flags |= IEEE80211_TX_STATUS_ACK;
else {
rt2x00dev->low_level_stats.dot11ACKFailureCount++;
entry->tx_status.excessive_retries = 1;
Index: wireless-dev/drivers/net/wireless/d80211/p54/prism54common.c
===================================================================
--- wireless-dev.orig/drivers/net/wireless/d80211/p54/prism54common.c
+++ wireless-dev/drivers/net/wireless/d80211/p54/prism54common.c
@@ -250,7 +250,8 @@ static void p54_rx_frame_sent(struct net
memcpy(&status.control, range->control,
sizeof(status.control));
kfree(range->control);
- status.ack = (payload->status >> 8) & 1;
+ if ((payload->status >> 8) & 1)
+ status.flags |= IEEE80211_TX_STATUS_ACK;
status.ack_signal = le16_to_cpu(payload->ack_rssi);
skb_pull(entry, sizeof(*hdr) + sizeof(struct
p54_tx_control_allocdata));
ieee80211_tx_status_irqsafe(dev, entry, &status);
--
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
