Signed-off-by: Francois Romieu <[EMAIL PROTECTED]>
---
 drivers/net/chelsio/my3126.c  |   16 ++++++++--------
 drivers/net/chelsio/vsc7326.c |   12 ++++++------
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c
index 0b90014..67f8a4a 100644
--- a/drivers/net/chelsio/my3126.c
+++ b/drivers/net/chelsio/my3126.c
@@ -10,25 +10,25 @@ static int my3126_reset(struct cphy *cph
         * This can be done through registers.  It is not required since
         * a full chip reset is used.
         */
-       return (0);
+       return 0;
 }
 
 static int my3126_interrupt_enable(struct cphy *cphy)
 {
        schedule_delayed_work(&cphy->phy_update, HZ/30);
        t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
-       return (0);
+       return 0;
 }
 
 static int my3126_interrupt_disable(struct cphy *cphy)
 {
        cancel_rearming_delayed_work(&cphy->phy_update);
-       return (0);
+       return 0;
 }
 
 static int my3126_interrupt_clear(struct cphy *cphy)
 {
-       return (0);
+       return 0;
 }
 
 #define OFFSET(REG_ADDR)    (REG_ADDR << 2)
@@ -100,7 +100,7 @@ static void my3216_poll(void *arg)
 
 static int my3126_set_loopback(struct cphy *cphy, int on)
 {
-       return (0);
+       return 0;
 }
 
 /* To check the activity LED */
@@ -144,7 +144,7 @@ static int my3126_get_link_status(struct
        if (fc)
                *fc = PAUSE_RX | PAUSE_TX;
 
-       return (0);
+       return 0;
 }
 
 static void my3126_destroy(struct cphy *cphy)
@@ -174,7 +174,7 @@ static struct cphy *my3126_phy_create(ad
        INIT_WORK(&cphy->phy_update, my3216_poll, cphy);
        cphy->bmsr = 0;
 
-       return (cphy);
+       return cphy;
 }
 
 /* Chip Reset */
@@ -195,7 +195,7 @@ static int my3126_phy_reset(adapter_t *
        val |= 0x8000;
        t1_tpi_write(adapter, A_ELMER0_GPO, val);
        udelay(100);
-       return (0);
+       return 0;
 }
 
 struct gphy t1_my3126_ops = {
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c
index 3355441..8c4a31e 100644
--- a/drivers/net/chelsio/vsc7326.c
+++ b/drivers/net/chelsio/vsc7326.c
@@ -256,7 +256,7 @@ static int bist_rd(adapter_t *adapter, i
        else if((result & (1<<8)) != 0x0)
                CH_ERR("bist read error: 0x%x\n", result);
 
-       return(result & 0xff);
+       return (result & 0xff);
 }
 
 static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
@@ -286,7 +286,7 @@ static int bist_wr(adapter_t *adapter, i
        else if((result & (1<<26)) != 0x0)
                CH_ERR("bist write error: 0x%x\n", result);
 
-       return(0);
+       return 0;
 }
 
 static int run_bist(adapter_t *adapter, int moduleid)
@@ -295,7 +295,7 @@ static int run_bist(adapter_t *adapter,
        (void) bist_wr(adapter,moduleid, 0x00, 0x02);
        (void) bist_wr(adapter,moduleid, 0x01, 0x01);
 
-       return(0);
+       return 0;
 }
 
 static int check_bist(adapter_t *adapter, int moduleid)
@@ -309,14 +309,14 @@ static int check_bist(adapter_t *adapter
        if ((result & 3) != 0x3)
                CH_ERR("Result: 0x%x  BIST error in ram %d, column: 0x%04x\n",
                        result, moduleid, column);
-       return(0);
+       return 0;
 }
 
 static int enable_mem(adapter_t *adapter, int moduleid)
 {
        /*enable mem*/
        (void) bist_wr(adapter,moduleid, 0x00, 0x00);
-       return(0);
+       return 0;
 }
 
 static int run_bist_all(adapter_t *adapter)
@@ -358,7 +358,7 @@ static int run_bist_all(adapter_t *adapt
        udelay(300);
        vsc_write(adapter, REG_MEM_BIST, 0x0);
        mdelay(10);
-       return(0);
+       return 0;
 }
 
 static int mac_intr_handler(struct cmac *mac)
-- 
1.4.4.1

-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to