On Wed, Jan 30, 2019 at 11:21:57AM +0000, Pankaj Bansal wrote:
> Add support for an MDIO bus multiplexer controlled by a regmap device, like
> an
> FPGA.
>
> These apis is an extension of the existing driver
> drivers/net/phy/mdio-mux-mmioreg.c.
>
> The problem with mmioreg driver is that it can operate only on memory mapped
> devices.
> but if we have a device that controls mdio muxing and that device is
> controlled
> using
> i2c or spi, then it will not work.
>
> Therefore, added apis that can be used by regmap device to control mdio mux.
>
> Tested on a NXP LX2160AQDS board which uses the "QIXIS" FPGA attached to the
> i2c bus.
>
> This is my second attempt at this.
> In my previous approach i wrote a separate driver for regmap apis. But then i
> realized that it is not meant to control a specific device.
> It is meant to control some registers of parent device. Therefore, IMO this
> should not be a
> Platform driver and there should not be any "compatible" property to which
> this
> driver is associated.
Hi Pankaj
It is not clear to me how you actually use this. You also need to
document the device tree binding. It could be when you write that
documentation it then becomes clear how it should be used.
Do you have patches adding support for this to the LX2160AQDS? Seeing
that would also help.
Thanks
Andrew
