Subject: e1000: narrow down the scope of the tipg timer tweak
From: Jesse Brandeburg <[EMAIL PROTECTED]>
the driver has (ancient) code for messing with TIPG from the 82542 days.
Unfortunately this code was running on our current adapters and setting
TIPG for fiber to be +1 over the copper value. This caused 1.45Mpps
to be sent instead of 1.487Mpps.
Signed-off-by: Jesse Brandeburg <[EMAIL PROTECTED]>
Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
Signed-off-by: Arjan van de Ven <[EMAIL PROTECTED]>
---
drivers/net/e1000/e1000_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
Index: linux-2.6/drivers/net/e1000/e1000_main.c
===================================================================
--- linux-2.6.orig/drivers/net/e1000/e1000_main.c
+++ linux-2.6/drivers/net/e1000/e1000_main.c
@@ -1582,9 +1582,9 @@ e1000_configure_tx(struct e1000_adapter
}
/* Set the default values for the Tx Inter Packet Gap timer */
-
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes)
+ if (adapter->hw.mac_type <= e1000_82547_rev_2 &&
+ (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
else
tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
