This is the latest version of rfkill.
The changes since the version that was originally send are:

Spelling fixes (Thanks to Randy Dunlap)
THIS_MODULE is now a field in the rkfill_master (Suggested by Christoph Hellwig)

The open_count has been completely removed, decision making on which action 
should
be taken is now handled by the user_claim field, which can be set through sysfs.
The possible choice include
 1 - let rfkill handle everything without bothering the user
 2 - let rfkill handle everything but send a notification to the user
 3 - let rfkill send a notification only

The toggling of the keys is now type based, this means that if 1 key is being 
toggled
all keys of the same type will be toggled.

As optimization and clearly seperate the keys per type, the rfkill_type 
structure
now holds the list of the keys that belong to him. This has greatly reduced
the size of the rfkill_master structure.

sysfs will hold the following entries:

- The main folder: "rfkill"
- The main folder contains the type folders "wlan", "bluetooth" and "irda".
- Each type folder contains the files
        - "claim" where the user claim can be read/written
        - "status" The radio status of this type
        - The folders for each key belonging to this type
- Each key folder contains the files
        - "status" The status of this key
        - "idev" The symlink to the input device entry in sysfs
        - "dev" The symlink to the drivers device entry in sysfs

Signed-off-by Ivo van Doorn <[EMAIL PROTECTED]>

---

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ba0e88c..e58c0bf 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -79,4 +79,20 @@ config HP_SDC_RTC
          Say Y here if you want to support the built-in real time clock
          of the HP SDC controller.
 
+config RFKILL
+       tristate "RF button support"
+       depends on SYSFS
+       help
+         If you say yes here, the rfkill driver will be built
+         which allows network devices to register their hardware
+         RF button which controls the radio state. This driver
+         will then create an input device for it.
+
+         When the input device is not used, the rfkill driver
+         will make sure that when the RF button is pressed the radio
+         is enabled or disabled accordingly. When the input device
+         has been opened by the user this radio control will be left
+         to the user, and rfkill will only send the RF button status
+         change to userspace.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 415c491..e788a1b 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_INPUT_UINPUT)            += uinput.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)       += wistron_btns.o
 obj-$(CONFIG_HP_SDC_RTC)               += hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)      += ixp4xx-beeper.o
+obj-$(CONFIG_RFKILL)                   += rfkill.o
diff --git a/drivers/input/misc/rfkill.c b/drivers/input/misc/rfkill.c
new file mode 100644
index 0000000..065ff56
--- /dev/null
+++ b/drivers/input/misc/rfkill.c
@@ -0,0 +1,986 @@
+/*
+       Copyright (C) 2006 Ivo van Doorn
+
+       This program is free software; you can redistribute it and/or modify
+       it under the terms of the GNU General Public License as published by
+       the Free Software Foundation; either version 2 of the License, or
+       (at your option) any later version.
+
+       This program is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+       GNU General Public License for more details.
+
+       You should have received a copy of the GNU General Public License
+       along with this program; if not, write to the
+       Free Software Foundation, Inc.,
+       59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/input.h>
+#include <linux/rfkill.h>
+
+MODULE_AUTHOR("Ivo van Doorn <[EMAIL PROTECTED]>");
+MODULE_VERSION("1.0");
+MODULE_DESCRIPTION("RF key support");
+MODULE_LICENSE("GPL");
+
+/*
+ * rfkill key structure.
+ */
+struct rfkill_key {
+       /*
+        * For sysfs representation.
+        */
+       struct class_device *cdev;
+
+       /*
+        * Pointer to rfkill structure
+        * that was filled in by key driver.
+        */
+       struct rfkill *rfkill;
+
+       /*
+        * Pointer to type structure
+        * that this key belongs to.
+        */
+       struct rfkill_type *type;
+
+       /*
+        * Current status of the key which controls the radio,
+        * this value will change after the key state has changed
+        * after polling, or the key driver has send the new state
+        * manually.
+        */
+       int key_status;
+
+       /*
+        * Input device for this key.
+        */
+       struct input_dev *input;
+
+       /*
+        * List head structure to be used
+        * to add this structure to the list.
+        */
+       struct list_head entry;
+};
+
+/*
+ * rfkill type structure.
+ */
+struct rfkill_type {
+       /*
+        * For sysfs representation.
+        */
+       struct class_device *cdev;
+
+       /*
+        * All access to the type structure and its
+        * children (the keys) are protected by this mutex.
+        */
+       struct mutex mutex;
+
+       /*
+        * Name of this radio type.
+        */
+       char *name;
+
+       /*
+        * Key type identification. Value must be any
+        * in the key_type enum.
+        */
+       unsigned int key_type;
+
+       /*
+        * List of rfkill_key structures.
+        */
+       struct list_head key_list;
+
+       /*
+        * Number of registered keys of this type.
+        */
+       unsigned int key_count;
+
+       /*
+        * Once key status change has been detected, the toggled
+        * field should be set to indicate a notification to
+        * user or driver should be performed. This is stored
+        * globally since all keys within this type need to be
+        * toggled.
+        */
+       unsigned int toggled;
+
+       /*
+        * The claim the user has over the toggling of the radio,
+        * this can be any value of the user_claim enumeration.
+        */
+       unsigned int user_claim;
+
+       /*
+        * Current state of the radios in this type.
+        */
+       unsigned int radio_status;
+
+       /*
+        * Number of keys that require polling
+        */
+       unsigned int poll_required;
+
+       /*
+        * Work structures for periodic polling,
+        * as well as the scheduled radio toggling.
+        */
+       struct work_struct toggle_work;
+       struct work_struct poll_work;
+};
+
+/*
+ * rfkill master structure.
+ */
+struct rfkill_master {
+       /*
+        * For sysfs representation.
+        */
+       struct class *class;
+
+       /*
+        * Reference to this modules structure.
+        */
+       struct module *owner;
+
+       /*
+        * List of available key types.
+        */
+       struct rfkill_type* type[KEY_TYPE_MAX];
+};
+
+/*
+ * We only need 1 single master interface,
+ * make this a global variable since we always need it.
+ */
+static struct rfkill_master *master;
+
+/*
+ * Send toggle event to key driver.
+ */
+static void rfkill_toggle_radio_driver(struct rfkill_key *key)
+{
+       struct rfkill *rfkill = key->rfkill;
+       struct rfkill_type *type = key->type;
+
+       /*
+        * Check what the current radio status is, and perform
+        * the correct action to toggle the radio. This will make
+        * sure the correct event happens when either the key driver
+        * of the user has requested to toggle this radio.
+        */
+       if (!type->radio_status)
+               rfkill->enable_radio(rfkill->data);
+       else if (type->radio_status)
+               rfkill->disable_radio(rfkill->data);
+}
+
+/*
+ * Send toggle event to userspace through the input device.
+ */
+static void rfkill_toggle_radio_input(struct rfkill_key *key)
+{
+       input_report_key(key->input, KEY_RFKILL, !key->type->radio_status);
+       input_sync(key->input);
+}
+
+/*
+ * Loop through the list of registered keys and toggle each
+ * key if this type has been toggled (by either user or driver).
+ */
+static void rfkill_toggle_radio(void *data)
+{
+       struct rfkill_type *type = data;
+       struct rfkill_key *key;
+
+       mutex_lock(&type->mutex);
+
+       /*
+        * If this type hasn't been toggled by any of the keys
+        * or the user we can skip the toggle run.
+        */
+       if (!type->toggled) {
+               mutex_unlock(&type->mutex);
+               return;
+       }
+
+       list_for_each_entry(key, &type->key_list, entry) {
+               /*
+                * Check what kind of claim the user has requested
+                * on this key. This determined if we should send
+                * a user and/or a driver notification.
+                */
+               if (type->user_claim != USER_CLAIM_IGNORE)
+                       rfkill_toggle_radio_input(key);
+               else if (type->user_claim != USER_CLAIM_SINGLE)
+                       rfkill_toggle_radio_driver(key);
+       }
+
+       /*
+        * Reset the radio_status and toggled field,
+        * to respresent the correct status to the user,
+        * and allow the status to be toggled again.
+        */
+       type->radio_status = !type->radio_status;
+       type->toggled = 0;
+
+       mutex_unlock(&type->mutex);
+}
+
+/*
+ * Check the new status of the key, and determine if the key has been toggled.
+ * This function can be called upon request by the device driver or userspace.
+ */
+static int rfkill_check_status(struct rfkill_key *key, int status)
+{
+       struct rfkill_type *type = key->type;
+
+       /*
+        * A key should be toggled if the current radio status does not
+        * match the requested status. This check is required instead of
+        * comparing it to the current key status since this function can
+        * be called on request of the user as well. The user is able to
+        * request a radio toggle to make sure the radio status will match
+        * the key status if the new key status has been reported to
+        * userspace only.
+        * As a safety measure, we won't toggle a key twice.
+        */
+       if (type->radio_status != !!status && !type->toggled) {
+               type->toggled = 1;
+               return 1;
+       }
+
+       return 0;
+}
+
+/*
+ * Wrapper around the rfkill_check_status function, this may only
+ * be called from the device driver status events. Besides calling
+ * rfkill_check_status it will also update the key_status field.
+ */
+static int rfkill_check_key(struct rfkill_key *key, int status)
+{
+       /*
+        * Store the new key status, and only if the 2
+        * are different the new status status should be
+        * passed on to rfkill_check_status to determine
+        * if any action should be performed.
+        */
+       if (key->key_status == !!status)
+               return 0;
+
+       key->key_status = !!status;
+       return rfkill_check_status(key->rfkill->key, status);
+}
+
+/*
+ * Handler that is run frequently to determine the current status
+ * of all registered keys that require polling.
+ */
+static void rfkill_list_poll(void *data)
+{
+       struct rfkill_type *type = data;
+       struct rfkill_key *key;
+       struct rfkill *rfkill;
+       int status = 0;
+
+       mutex_lock(&type->mutex);
+
+       list_for_each_entry(key, &type->key_list, entry) {
+               rfkill = key->rfkill;
+
+               /*
+                * If the poll handler has not been given
+                * the key driver should report events,
+                * so we can ignore this key now.
+                */
+               if (!rfkill->poll)
+                       continue;
+
+               /*
+                * Poll radio state and check if a radio toggle
+                * has been requested by the key.
+                */
+               if (rfkill_check_key(key, rfkill->poll(rfkill->data)))
+                       status = 1;
+       }
+
+       mutex_unlock(&type->mutex);
+
+       /*
+        * A radio toggle has been requested, schedule the toggle work thread.
+        */
+       if (status)
+               schedule_work(&type->toggle_work);
+
+       /*
+        * Check if we need to rearm ourselves.
+        */
+       if (type->poll_required)
+               schedule_delayed_work(&type->poll_work, RFKILL_POLL_DELAY);
+}
+
+/**
+ * rfkill_report_event - Report change in key status to rfkill handler.
+ * @rfkill: rfkill structure registered by key driver
+ * @new_status: new key status
+ *
+ * This function should be called by the key driver if it has not provided
+ * a poll handler with rfkill. As soon as the key driver has determined
+ * the status of the key has changed it should report the new status
+ * through this function.
+ */
+void rfkill_report_event(struct rfkill *rfkill, int new_status)
+{
+       struct rfkill_type *type = rfkill->key->type;
+
+       mutex_lock(&type->mutex);
+
+       if (rfkill_check_key(rfkill->key, new_status))
+               schedule_work(&type->toggle_work);
+
+       mutex_unlock(&type->mutex);
+}
+EXPORT_SYMBOL_GPL(rfkill_report_event);
+
+/*
+ * Sysfs release functions.
+ */
+static void rfkill_class_device_release(struct class_device *cdev)
+{
+       kfree(class_get_devdata(cdev));
+}
+
+static void rfkill_class_release(struct class *class)
+{
+       kfree(master);
+       master = NULL;
+}
+
+/*
+ * rfkill key attribute to display the current key status.
+ */
+static ssize_t rfkill_key_status_show(struct class_device *cdev, char *buf)
+{
+       struct rfkill_key *key = class_get_devdata(cdev);
+
+       if (!capable(CAP_NET_ADMIN))
+               return -EPERM;
+
+       return sprintf(buf, "%d", key->key_status);
+}
+
+static struct class_device_attribute cdev_attr_key_status =
+       __ATTR(status, S_IRUGO, rfkill_key_status_show, NULL);
+
+/*
+ * rfkill type attribute to display the current radio status.
+ */
+static ssize_t rfkill_type_status_show(struct class_device *cdev, char *buf)
+{
+       struct rfkill_type *type = class_get_devdata(cdev);
+
+       if (!capable(CAP_NET_ADMIN))
+               return -EPERM;
+
+       return sprintf(buf, "%d", type->radio_status);
+}
+
+static struct class_device_attribute cdev_attr_type_status =
+       __ATTR(status, S_IRUGO, rfkill_type_status_show, NULL);
+
+/*
+ * rfkill type attribute to display/change the user claim
+ */
+static ssize_t rfkill_type_claim_show(struct class_device *cdev, char *buf)
+{
+       struct rfkill_type *type = class_get_devdata(cdev);
+
+       if (!capable(CAP_NET_ADMIN))
+               return -EPERM;
+
+       return sprintf(buf, "%d", type->user_claim);
+}
+
+static ssize_t rfkill_type_claim_store(struct class_device *cdev,
+       const char * buf, size_t count)
+{
+       struct rfkill_type *type = class_get_devdata(cdev);
+       unsigned int claim = simple_strtoul(buf, NULL, 0);
+
+       if (!capable(CAP_NET_ADMIN))
+               return -EPERM;
+
+       if (claim >= USER_CLAIM_MAX)
+               return -EINVAL;
+
+       mutex_lock(&type->mutex);
+
+       type->user_claim = claim;
+
+       mutex_unlock(&type->mutex);
+
+       return count;
+}
+
+static struct class_device_attribute cdev_attr_type_claim =
+       __ATTR(claim, S_IRUGO | S_IWUSR,
+               rfkill_type_claim_show, rfkill_type_claim_store);
+
+/*
+ * rfkill key sysfs creation/destruction.
+ */
+static int rfkill_key_sysfs_create(struct rfkill_key *key)
+{
+       int status;
+
+       key->cdev = class_device_create(master->class,
+                                       key->type->cdev,
+                                       key->rfkill->dev->devt,
+                                       key->rfkill->dev,
+                                       key->rfkill->dev_name);
+       if (unlikely(!key->cdev || IS_ERR(key->cdev)))
+               return PTR_ERR(key->cdev);
+
+       /*
+        * Make sure this key can be freed when the class_device is freed.
+        */
+       class_set_devdata(key->cdev, key);
+
+       /*
+        * Create the sysfs files.
+        */
+       status = class_device_create_file(key->cdev, &cdev_attr_key_status);
+       if (unlikely(status))
+               goto exit;
+
+       /*
+        * The key belongs to the device structure the key driverdevt
+        * has given us a reference to. But besides that device
+        * this key also belongs to the input device that has been
+        * created. We should create the link to that entry manually.
+        */
+       status = sysfs_create_link(&key->cdev->kobj, &key->input->cdev.kobj,
+                                  "idev");
+       if (unlikely(status))
+               goto exit_file;
+
+       return 0;
+
+exit_file:
+       class_device_remove_file(key->cdev, &cdev_attr_key_status);
+
+exit:
+       class_device_destroy(master->class, key->rfkill->dev->devt);
+       class_set_devdata (key->cdev, NULL);
+
+       return status;
+}
+
+static void rfkill_key_sysfs_release(struct rfkill_key *key)
+{
+       sysfs_remove_link(&key->cdev->kobj, "idev");
+       class_device_remove_file(key->cdev, &cdev_attr_key_status);
+       class_device_destroy(master->class, key->rfkill->dev->devt);
+}
+
+/*
+ * rfkill type sysfs creation/destruction.
+ */
+static int rfkill_type_sysfs_create(struct rfkill_type *type)
+{
+       int status;
+
+       type->cdev = class_device_create(master->class, NULL, type->key_type,
+                                        NULL, type->name);
+       if (unlikely(!type->cdev || IS_ERR(type->cdev)))
+               return PTR_ERR(type->cdev);
+
+       /*
+        * Make sure this key can be freed when the class_device is freed.
+        */
+       class_set_devdata(type->cdev, type);
+
+       /*
+        * Create the sysfs files.
+        */
+       status = class_device_create_file(type->cdev, &cdev_attr_type_claim);
+       if (unlikely(status))
+               goto exit;
+
+       /*
+        * Create the sysfs files.
+        */
+       status = class_device_create_file(type->cdev, &cdev_attr_type_status);
+       if (unlikely(status))
+               goto exit_claim;
+
+       return 0;
+
+exit_claim:
+       class_device_remove_file(type->cdev, &cdev_attr_type_claim);
+
+exit:
+       class_device_destroy(type->cdev->class, type->key_type);
+       class_set_devdata (type->cdev, NULL);
+
+       return status;
+}
+
+static void rfkill_type_sysfs_release(struct rfkill_type *type)
+{
+       class_device_remove_file(type->cdev, &cdev_attr_type_status);
+       class_device_remove_file(type->cdev, &cdev_attr_type_claim);
+       class_device_destroy(type->cdev->class, type->key_type);
+}
+
+/*
+ * rfkill master sysfs creation/destruction.
+ */
+static int rfkill_master_sysfs_create(struct rfkill_master *master)
+{
+       master->class = class_create(master->owner, "rfkill");
+       if (unlikely(!master->class || IS_ERR(master->class)))
+               return PTR_ERR(master->class);
+
+       master->class->release = rfkill_class_device_release;
+       master->class->class_release = rfkill_class_release;
+
+       return 0;
+}
+
+static void rfkill_master_sysfs_release(struct rfkill_master *master)
+{
+       class_destroy(master->class);
+}
+
+/*
+ * Input device initialization/deinitialization handler.
+ */
+static struct input_dev* rfkill_register_input(struct rfkill_key *key)
+{
+       struct input_dev *input;
+       int status;
+       char *name;
+       char *phys;
+
+       input = input_allocate_device();
+       if (unlikely(!input))
+               return NULL;
+
+       /*
+        * Link the private data to rfkill structure.
+        */
+       input->private = key;
+
+       /*
+        * Allocate the strings for the input device names.
+        */
+       name = kasprintf(GFP_KERNEL, "rfkill %s",
+                        key->rfkill->dev_name);
+       phys = kasprintf(GFP_KERNEL, "rfkill/%s/%s",
+                        key->type->name, key->rfkill->dev_name);
+
+       if (!name || !phys)
+               goto exit;
+
+       input->name = name;
+       input->phys = phys;
+
+       /*
+        * Initialize the input_id structure.
+        */
+       input->id.bustype = BUS_HOST;
+       input->id.vendor = 0x0001;
+       input->id.product = 0x0001;
+       input->id.version = 0x0001;
+
+       input->evbit[0] = BIT(EV_KEY);
+       set_bit(KEY_RFKILL, input->keybit);
+
+       status = input_register_device(input);
+       if (status)
+               goto exit;
+
+       return input;
+
+exit:
+       kfree(name);
+       kfree(phys);
+
+       input_free_device(input);
+
+       return NULL;
+}
+
+static void rfkill_deregister_input(struct rfkill_key *key)
+{
+       const char *name;
+       const char *phys;
+
+       /*
+        * The name and phys fields have been allocated
+        * using kasprintf, this means they have to be
+        * freed seperately.
+        */
+       name = key->input->name;
+       phys = key->input->phys;
+
+       input_unregister_device(key->input);
+       kfree(name);
+       kfree(phys);
+       input_free_device(key->input);
+}
+
+/*
+ * Rfkill key initialization/deinitialization.
+ * These methods should only be called with the mutex held.
+ */
+static int rfkill_key_init(struct rfkill *rfkill, struct rfkill_key *key,
+       int status)
+{
+       /*
+        * Initialize all variables.
+        */
+       key->rfkill = rfkill;
+       rfkill->key = key;
+       key->type = master->type[rfkill->key_type];
+       key->key_status = status;
+       INIT_LIST_HEAD(&key->entry);
+
+       /*
+        * Create input device.
+        */
+       key->input = rfkill_register_input(key);
+       if (!key->input)
+               goto exit;
+
+       /*
+        * Create sysfs entry.
+        */
+       if (rfkill_key_sysfs_create(key))
+               goto exit_input;
+
+       return 0;
+
+exit_input:
+       rfkill_deregister_input(key);
+
+exit:
+       rfkill->key = NULL;
+
+       return -ENOMEM;
+}
+
+static void rfkill_key_deinit(struct rfkill_key *key)
+{
+       if (key) {
+               rfkill_key_sysfs_release(key);
+               rfkill_deregister_input(key);
+       }
+}
+
+/*
+ * Rfkill type handler to check if the sysfs entries should
+ * be created or removed based on the number of registered keys.
+ */
+static void rfkill_add_type_key(struct rfkill_type *type,
+       struct rfkill_key *key)
+{
+       /*
+        * Add key to the list.
+        */
+       list_add(&key->entry, &type->key_list);
+       type->key_count++;
+}
+
+static void rfkill_del_type_key(struct rfkill_type *type,
+       struct rfkill_key *key)
+{
+       /*
+        * Delete the rfkill structure from the list.
+        */
+       list_del(&key->entry);
+       type->key_count--;
+}
+
+/**
+ * rfkill_register_key - Register a rfkill structure.
+ * @rfkill: rfkill structure to be registered
+ * @init_status: initial status of the key at the time this function is called
+ *
+ * This function should be called by the key driver when the rfkill structure
+ * needs to be registered. Immediately from registration the key driver
+ * should be able to receive calls through the poll, enable_radio and
+ * disable_radio handlers if those were registered.
+ */
+int rfkill_register_key(struct rfkill *rfkill, int init_status)
+{
+       struct rfkill_type *type;
+       struct rfkill_key *key;
+       int status;
+
+       if (!rfkill || !rfkill->enable_radio || !rfkill->disable_radio)
+               return -EINVAL;
+
+       /*
+        * Check if the requested key_type was valid.
+        */
+       if (rfkill->key_type >= KEY_TYPE_MAX)
+               return -EINVAL;
+
+       type = master->type[rfkill->key_type];
+
+       /*
+        * Increase module use count to prevent this
+        * module to be unloaded while there are still
+        * registered keys.
+        */
+       if (!try_module_get(master->owner))
+               return -EBUSY;
+
+       mutex_lock(&type->mutex);
+
+       key = kzalloc(sizeof(struct rfkill_key), GFP_KERNEL);
+       if (unlikely(!key)) {
+               status = -ENOMEM;
+               goto exit;
+       }
+
+       /*
+        * Initialize key, and add it to the type structure.
+        */
+       key->type = type;
+       status = rfkill_key_init(rfkill, key, init_status);
+       if (status)
+               goto exit_key;
+
+       /*
+        * Add key to the specified type.
+        */
+       rfkill_add_type_key(type, key);
+
+       /*
+        * Check if we need polling, and if we do
+        * increase the poll required counter and check
+        * if we weren't polling yet.
+        */
+       if (rfkill->poll && !type->poll_required++)
+               schedule_delayed_work(&type->poll_work, RFKILL_POLL_DELAY);
+
+       mutex_unlock(&type->mutex);
+
+       return 0;
+
+exit_key:
+       kfree(key);
+
+exit:
+       mutex_unlock(&type->mutex);
+       module_put(master->owner);
+
+       return status;
+}
+EXPORT_SYMBOL_GPL(rfkill_register_key);
+
+/**
+ * rfkill_deregister_key - Deregister a previously registered rfkill structure.
+ * @rfkill: rfkill structure to be deregistered
+ *
+ * This function should be called by the key driver when the rfkill structure
+ * needs to be deregistered. This function may only be called if it was
+ * previously registered with rfkill_register_key.
+ */
+int rfkill_deregister_key(struct rfkill *rfkill)
+{
+       struct rfkill_type *type;
+
+       if (!rfkill || !rfkill->key)
+               return -EINVAL;
+
+       type = rfkill->key->type;
+
+       mutex_lock(&type->mutex);
+
+       /*
+        * Cancel delayed work if this is the last key
+        * that requires polling. It is not bad if the
+        * workqueue is still running, the workqueue
+        * will not rearm itself since the poll_required
+        * variable has been cleared, and we have
+        * protected the list with a mutex.
+        */
+       if (rfkill->poll && !--type->poll_required)
+               cancel_delayed_work(&type->poll_work);
+
+       /*
+        * Deinitialize key, and remove it from the type.
+        */
+       rfkill_del_type_key(type, rfkill->key);
+       rfkill_key_deinit(rfkill->key);
+
+       mutex_unlock(&type->mutex);
+
+       /*
+        * rfkill entry has been removed,
+        * decrease module use count.
+        */
+       module_put(master->owner);
+       
+       return 0;
+}
+EXPORT_SYMBOL_GPL(rfkill_deregister_key);
+
+/*
+ * Rfkill type initialization/deinitialization.
+ */
+static int rfkill_type_init(unsigned int key_type, char *name)
+{
+       struct rfkill_type *type;
+       int status;
+
+       type = kzalloc(sizeof(struct rfkill_type), GFP_KERNEL);
+       if (unlikely(!type))
+               return -ENOMEM;
+
+       /*
+        * Initialize all variables.
+        */
+       mutex_init(&type->mutex);
+       type->name = name;
+       type->key_type = key_type;
+       INIT_LIST_HEAD(&type->key_list);
+       type->toggled = 0;
+       type->key_count = 0;
+       type->poll_required = 0;
+
+       /*
+        * Work structures for periodic polling,
+        * as well as the scheduled radio toggling.
+        */
+       INIT_WORK(&type->toggle_work, &rfkill_toggle_radio, type);
+       INIT_WORK(&type->poll_work, &rfkill_list_poll, type);
+
+       /*
+        * Create sysfs entry.
+        */
+       status = rfkill_type_sysfs_create(type);
+       if (status) {
+               printk(KERN_ERR "Failed to create sysfs entry %s", name);
+               goto exit;
+       }
+
+       master->type[key_type] = type;
+
+       return 0;
+
+exit:
+       kfree(type);
+
+       return status;
+}
+
+static void rfkill_type_deinit(unsigned int key_type)
+{
+       rfkill_type_sysfs_release(master->type[key_type]);
+}
+
+/*
+ * Rfkill master initialization/deinitialization.
+ */
+static int rfkill_master_init(void)
+{
+       int status;
+
+       master = kzalloc(sizeof(struct rfkill_master), GFP_KERNEL);
+       if (unlikely(!master))
+               return -ENOMEM;
+
+       /*
+        * Set the module owner reference.
+        */
+       master->owner = THIS_MODULE;
+
+       /*
+        * Create sysfs entry.
+        */
+       status = rfkill_master_sysfs_create(master);
+       if (status) {
+               printk(KERN_ERR "Failed to create master sysfs entry");
+               goto exit;
+       }
+
+       /*
+        * Create and initialize all type structures.
+        */
+       status = rfkill_type_init(KEY_TYPE_WLAN, "wlan");
+       if (status)
+               goto exit_master;
+
+       status = rfkill_type_init(KEY_TYPE_BlUETOOTH, "bluetooth");
+       if (status)
+               goto exit_wlan;
+
+       status = rfkill_type_init(KEY_TYPE_IRDA, "irda");
+       if (status)
+               goto exit_bluetooth;
+
+       return 0;
+
+exit_bluetooth:
+       rfkill_type_deinit(KEY_TYPE_BlUETOOTH);
+
+exit_wlan:
+       rfkill_type_deinit(KEY_TYPE_WLAN);
+
+exit_master:
+       rfkill_master_sysfs_release(master);
+
+exit:
+       kfree(master);
+       master = NULL;
+
+       return status;
+}
+
+static void rfkill_master_deinit(void)
+{
+       if (master) {
+               rfkill_type_deinit(KEY_TYPE_IRDA);
+               rfkill_type_deinit(KEY_TYPE_BlUETOOTH);
+               rfkill_type_deinit(KEY_TYPE_WLAN);
+               rfkill_master_sysfs_release(master);
+       }
+}
+
+/*
+ * Module initialization/deinitialization.
+ */
+static int __init rfkill_init(void)
+{
+       printk(KERN_INFO "Loading rfkill driver.\n");
+
+       return rfkill_master_init();
+}
+
+static void __exit rfkill_exit(void)
+{
+       rfkill_master_deinit();
+
+       printk(KERN_INFO "Unloading rfkill driver.\n");
+}
+
+module_init(rfkill_init);
+module_exit(rfkill_exit);
diff --git a/include/linux/input.h b/include/linux/input.h
index c38507b..1b44108 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -491,6 +491,7 @@ struct input_absinfo {
 #define KEY_DIGITS             0x19d
 #define KEY_TEEN               0x19e
 #define KEY_TWEN               0x19f
+#define KEY_RFKILL             0x1a0
 
 #define KEY_DEL_EOL            0x1c0
 #define KEY_DEL_EOS            0x1c1
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
new file mode 100644
index 0000000..4f45429
--- /dev/null
+++ b/include/linux/rfkill.h
@@ -0,0 +1,140 @@
+/*
+       Copyright (C) 2006 Ivo van Doorn
+
+       This program is free software; you can redistribute it and/or modify
+       it under the terms of the GNU General Public License as published by
+       the Free Software Foundation; either version 2 of the License, or
+       (at your option) any later version.
+
+       This program is distributed in the hope that it will be useful,
+       but WITHOUT ANY WARRANTY; without even the implied warranty of
+       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+       GNU General Public License for more details.
+
+       You should have received a copy of the GNU General Public License
+       along with this program; if not, write to the
+       Free Software Foundation, Inc.,
+       59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+       RF button support
+       Laptops are quite often equipped with an RF key to enable or
+       disable the radio of the wireless device attached to that key.
+       This wireless device usually is an integrated wireless network device,
+       infrared or bluetooth device.
+       There are 3 catagories of radio control keys:
+        A) The key directly toggles the hardware radio, and does not send an
+           event to userspace.
+        B) The key does not toggle the hardware radio, and does not send an
+           event to userspace.
+        C) The key does not toggle the hardware radio, but does send an event
+           to userspace.
+       Catagory (A) should create an input device themselves and send an
+       KEY_RFKILL event over that input device.
+       Catagory (B) should register themselves with rkfkill and allow rfkill
+       to toggle the radio and report events to userspace.
+       Catagory (C) should register with rfkill, who will listen to userspace
+       requests to toggle the radio and will send the signal to the driver.
+
+       The rfkill driver will contain a list of all devices with an RF button,
+       and hardware drivers need to register their hardware to the rfkill
+       interface. Rfkill will then take care of everything. If the RF key
+       requires polling to obtain the status this will be handled by rfkill.
+       If the RF key does not require polling but sends for example interrupts,
+       the hardware driver can report the change of status to rfkill, without
+       having to do any other action.
+
+       For each registered hardware button an input device will be created.
+       If this input device has been opened by the user, rfkill will send a
+       signal to userspace instead of the hardware about the new button
+       status. This will allow userpace to perform the correct steps
+       in order to bring down all interfaces.
+
+       Through sysfs it is also possible the user requests the toggling of
+       the radio, this means that the radio could be toggled even without
+       pressing the radio key.
+ */
+
+#ifndef RFKILL_H
+#define RFKILL_H
+
+#include <linux/device.h>
+
+/*
+ * The keys will be periodically checked if the
+ * key has been toggled. By default this will be 100ms.
+ */
+#define RFKILL_POLL_DELAY      ( HZ / 10 )
+
+/**
+ * enum key_type - Key type for rfkill keys.
+ * KEY_TYPE_WLAN: key type for Wireless network devices.
+ * KEY_TYPE_BlUETOOTH: key type for bluetooth devices.
+ * KEY_TYPE_IRDA: key type for infrared devices.
+ */
+enum key_type {
+       KEY_TYPE_WLAN = 0,
+       KEY_TYPE_BlUETOOTH = 1,
+       KEY_TYPE_IRDA = 2,
+       KEY_TYPE_MAX = 3,
+};
+
+/**
+ * enum user_claim - Users' claim on rfkill key.
+ * @USER_CLAIM_IGNORE: Don't notify user of key events.
+ * @USER_CLAIM_NOTIFY: Notify user of key events, but
+ *     still automatically toggle the radio.
+ * @USER_CLAIM_SINGLE: Notify user of key events, and
+ *     do not toggle the radio anymore.
+ */
+enum user_claim {
+       USER_CLAIM_IGNORE = 0,
+       USER_CLAIM_NOTIFY = 1,
+       USER_CLAIM_SINGLE = 2,
+       USER_CLAIM_MAX = 3,
+};
+
+/**
+ * struct rfkill - rfkill button control structure.
+ * @dev_name: Name of the interface. This will become the name
+ *     of the input device which will be created for this button.
+ * @dev: Pointer to the device structure to which this button belongs to.
+ * @data: Pointer to the RF button drivers private data which will be
+ *     passed along with the radio and polling handlers.
+ * @poll(void *data): Optional handler which will frequently be
+ *     called to determine the current status of the RF button.
+ * @enable_radio(void *data): Optional handler to enable the radio
+ *     once the RF button has been pressed and the hardware does enable
+ *     the radio automaticly.
+ * @disable_radio(void *data): Optional handler to disable the radio
+ *     once the RF button has been pressed and the hardware does disable
+ *     the radio automaticly.
+ * @key_type: Radio type which the button controls, the value stored
+ *     here should be a value from enum key_type.
+ * @key: Internal pointer that should not be touched by key driver.
+ *
+ * This structure can be used by a key driver to register the key
+ * to the rfkill driver in order to take control of the reporting
+ * to userspace or handling of radio status.
+ */
+struct rfkill {
+       char *dev_name;
+
+       struct device *dev;
+
+       void *data;
+       int (*poll)(void *data);
+       void (*enable_radio)(void *data);
+       void (*disable_radio)(void *data);
+
+       unsigned int key_type;
+
+       struct rfkill_key *key;
+};
+
+int rfkill_register_key(struct rfkill *rfkill, int init_status);
+int rfkill_deregister_key(struct rfkill *rfkill);
+void rfkill_report_event(struct rfkill *rfkill, int new_status);
+
+#endif /* RFKILL_H */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to