Kenzo Iwami wrote:
With this patch applied, I confirmed that the system doesn't panic.
I think this patch can fix this problem.
Does this patch have problems.
Kenzo,
thanks for staying patient while most of us were out or busy. Apart from acknowledging
that you might have fixed a problem with your patch, we're very reluctant to merge such
a huge change in our driver that touches much more cases then the one that seems to be
giving you problems.
I've thought up a much more elegant solution that prevents the driver from asserting the
swfw semaphore during normal operations by checking the mac LU (link up) register in the
watchdog. This allows the watchdog task to bypass all PHY checking in case all link
statuses are OK, and thus removes the big problem that you are seeing.
Attached a version that should apply against most current trees. Please give it a try
and let us know if this also fixes the problem for you. I will most likely push this
patch to the netdev tree in any case.
Cheers,
Auke
---
From: Auke Kok <[EMAIL PROTECTED]>
e1000: Don't do PHY reads in watchdog unless link status is down
The watchdog runs code that every 2 seconds performs several PHY reads
that are locked with the swfw semaphore, causing the semaphore to be
unavailable for a short time. This is completely unneeded in case the
MAC detects PHY link up (LU).
Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
---
drivers/net/e1000/e1000_main.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 34d8e5d..9660925 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2556,6 +2556,10 @@ e1000_watchdog(unsigned long data)
uint32_t link, tctl;
int32_t ret_val;
+ if ((netif_carrier_ok(netdev)) &&
+ (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU))
+ goto link_up;
+
ret_val = e1000_check_for_link(&adapter->hw);
if ((ret_val == E1000_ERR_PHY) &&
(adapter->hw.phy_type == e1000_phy_igp_3) &&
@@ -2684,6 +2688,7 @@ e1000_watchdog(unsigned long data)
e1000_smartspeed(adapter);
}
+link_up:
e1000_update_stats(adapter);
adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
