Most hardware can keep track of sequence numbers themselves,
unfortunately *most* doesn't cover all devices. ;)
This patch will keep track of the sequence number if the flag
IEEE80211_HW_SOFTWARE_SEQUENCE has been set.

Signed-off-by Ivo van Doorn <[EMAIL PROTECTED]>

---

diff -rNU3 dscape/include/net/d80211.h dscape_seq/include/net/d80211.h
--- dscape/include/net/d80211.h 2007-01-31 19:38:14.000000000 +0100
+++ dscape_seq/include/net/d80211.h     2007-01-31 19:55:55.000000000 +0100
@@ -534,6 +534,9 @@
        /* Does the device need the stack to create a RTS frame */
 #define IEEE80211_HW_SOFTWARE_RTS (1<<15)
 
+       /* Does the HOST need to insert the frame sequence counter */
+#define IEEE80211_HW_SOFTWARE_SEQUENCE (1<<16)
+
        u32 flags;                      /* hardware flags defined above */
 
        /* Set to the size of a needed device specific skb headroom for TX 
skbs. */
diff -rNU3 dscape/net/d80211/ieee80211.c dscape_seq/net/d80211/ieee80211.c
--- dscape/net/d80211/ieee80211.c       2007-01-31 19:41:18.000000000 +0100
+++ dscape_seq/net/d80211/ieee80211.c   2007-01-31 20:04:36.000000000 +0100
@@ -441,6 +441,7 @@
        size_t hdrlen, per_fragm, num_fragm, payload_len, left;
        struct sk_buff **frags, *first, *frag;
        int i;
+       u16 seq;
         u8 *pos;
        int frag_threshold = tx->local->fragmentation_threshold;
 
@@ -458,6 +459,7 @@
        if (!frags)
                goto fail;
 
+       seq = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ;
        hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREFRAGS);
        pos = first->data + hdrlen + per_fragm;
        left = payload_len - per_fragm;
@@ -486,7 +488,7 @@
                memcpy(fhdr, first->data, hdrlen);
                if (i == num_fragm - 2)
                        fhdr->frame_control &= 
cpu_to_le16(~IEEE80211_FCTL_MOREFRAGS);
-               fhdr->seq_ctrl = cpu_to_le16(i + 1);
+               fhdr->seq_ctrl = cpu_to_le16(seq + ((i + 1) & 
IEEE80211_SCTL_FRAG));
                copylen = left > per_fragm ? per_fragm : left;
                memcpy(skb_put(frag, copylen), pos, copylen);
 
@@ -933,6 +935,19 @@
        return TXRX_CONTINUE;
 }
 
+static ieee80211_txrx_result
+ieee80211_tx_h_sequence(struct ieee80211_txrx_data *tx)
+{
+       struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
+
+       if (!(tx->local->hw.flags & IEEE80211_HW_SOFTWARE_SEQUENCE) ||
+           ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)) < 24)
+               return TXRX_CONTINUE;
+
+       ieee80211_include_sequence(tx->local, hdr);
+
+       return TXRX_CONTINUE;
+}
 
 /* This function is called whenever the AP is about to exceed the maximum limit
  * of buffered frames for power saving STAs. This situation should not really
@@ -1806,6 +1821,10 @@
 
        memcpy(skb_put(skb, bh_len), b_head, bh_len);
 
+       if (!(hw->flags & IEEE80211_HW_SOFTWARE_SEQUENCE))
+               ieee80211_include_sequence(local,
+                       (struct ieee80211_hdr *)skb->data);
+
        ieee80211_beacon_add_tim(local, ap, skb);
 
        if (b_tail) {
@@ -4323,6 +4342,7 @@
 static ieee80211_tx_handler ieee80211_tx_handlers[] =
 {
        ieee80211_tx_h_check_assoc,
+       ieee80211_tx_h_sequence,
        ieee80211_tx_h_ps_buf,
        ieee80211_tx_h_select_key,
        ieee80211_tx_h_michael_mic_add,
@@ -4497,6 +4517,7 @@
 
        local->bridge_packets = 1;
 
+       local->seq_counter = 0;
        local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
        local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
        local->short_retry_limit = 7;
diff -rNU3 dscape/net/d80211/ieee80211_i.h dscape_seq/net/d80211/ieee80211_i.h
--- dscape/net/d80211/ieee80211_i.h     2007-01-31 19:41:53.000000000 +0100
+++ dscape_seq/net/d80211/ieee80211_i.h 2007-01-31 20:06:26.000000000 +0100
@@ -405,6 +405,7 @@
        int *supp_rates[NUM_IEEE80211_MODES];
        int *basic_rates[NUM_IEEE80211_MODES];
 
+       u16 seq_counter;
        int rts_threshold;
        int cts_protect_erp_frames;
        int fragmentation_threshold;
@@ -601,6 +602,20 @@
        spin_unlock_bh(&local->sta_lock);
 }
 
+static inline void ieee80211_include_sequence(struct ieee80211_local *local,
+                                             struct ieee80211_hdr *hdr)
+{
+       /*
+        * Set the sequence number for this frame.
+        */
+       hdr->seq_ctrl = cpu_to_le16(local->seq_counter & IEEE80211_SCTL_SEQ);
+
+       /*
+        * Increase the sequence number.
+        */
+       local->seq_counter = (local->seq_counter + 0x10) & IEEE80211_SCTL_SEQ;
+}
+
 /* ieee80211.c */
 void ieee80211_release_hw(struct ieee80211_local *local);
 int ieee80211_hw_config(struct ieee80211_local *local);
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to