Hi, On 12/05/2020 06:54:29+0100, Guillaume Tucker wrote: > Please see the bisection report below about a boot failure. > > Reports aren't automatically sent to the public while we're > trialing new bisection features on kernelci.org but this one > looks valid. > > It appears to be due to the fact that the network interface is > failing to get brought up: > > [ 114.385000] Waiting up to 10 more seconds for network. > [ 124.355000] Sending DHCP requests ...# > ..# > .# > timed out! > [ 212.355000] IP-Config: Reopening network devices... > [ 212.365000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > # > > > I guess the board would boot fine without network if it didn't > have ip=dhcp in the command line, so it's not strictly a kernel > boot failure but still an ethernet issue. >
I think the resolution of this issue is 99f81afc139c6edd14d77a91ee91685a414a1c66. If this is taken, then I think f5aba91d7f186cba84af966a741a0346de603cd4 should also be backported. > There wasn't any failure reported by kernelci on linux-4.9.y so > maybe this patch was applied by mistake on linux-4.4.y but I > haven't investigated enough to prove this. > > Thanks, > Guillaume > > > On 10/05/2020 18:27, kernelci.org bot wrote: > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > * This automated bisection report was sent to you on the basis * > > * that you may be involved with the breaking commit it has * > > * found. No manual investigation has been done to verify it, * > > * and the root cause of the problem may be somewhere else. * > > * * > > * If you do send a fix, please include this trailer: * > > * Reported-by: "kernelci.org bot" <b...@kernelci.org> * > > * * > > * Hope this helps! * > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > > > stable/linux-4.4.y bisection: baseline.login on at91-sama5d4_xplained > > > > Summary: > > Start: e157447efd85b Linux 4.4.223 > > Plain log: > > https://storage.kernelci.org/stable/linux-4.4.y/v4.4.223/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-at91-sama5d4_xplained.txt > > HTML log: > > https://storage.kernelci.org/stable/linux-4.4.y/v4.4.223/arm/multi_v7_defconfig/gcc-8/lab-baylibre/baseline-at91-sama5d4_xplained.html > > Result: 0d1951fa23ba0 net: phy: Avoid polling PHY with > > PHY_IGNORE_INTERRUPTS > > > > Checks: > > revert: PASS > > verify: PASS > > > > Parameters: > > Tree: stable > > URL: > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git > > Branch: linux-4.4.y > > Target: at91-sama5d4_xplained > > CPU arch: arm > > Lab: lab-baylibre > > Compiler: gcc-8 > > Config: multi_v7_defconfig > > Test case: baseline.login > > > > Breaking commit found: > > > > ------------------------------------------------------------------------------- > > commit 0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd > > Author: Florian Fainelli <f.faine...@gmail.com> > > Date: Mon Jan 18 19:33:06 2016 -0800 > > > > net: phy: Avoid polling PHY with PHY_IGNORE_INTERRUPTS > > > > commit d5c3d84657db57bd23ecd58b97f1c99dd42a7b80 upstream. > > > > Commit 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") changed > > a hunk in phy_state_machine() in the PHY_RUNNING case which was not > > needed. The change essentially makes the PHY library treat PHY devices > > with PHY_IGNORE_INTERRUPT to keep polling for the PHY device, even > > though the intent is not to do it. > > > > Fix this by reverting that specific hunk, which makes the PHY state > > machine wait for state changes, and stay in the PHY_RUNNING state for as > > long as needed. > > > > Fixes: 2c7b49212a86 ("phy: fix the use of PHY_IGNORE_INTERRUPT") > > Signed-off-by: Florian Fainelli <f.faine...@gmail.com> > > Signed-off-by: David S. Miller <da...@davemloft.net> > > Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> > > > > diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c > > index 7d2cf015c5e76..b242bec834f4b 100644 > > --- a/drivers/net/phy/phy.c > > +++ b/drivers/net/phy/phy.c > > @@ -912,10 +912,10 @@ void phy_state_machine(struct work_struct *work) > > phydev->adjust_link(phydev->attached_dev); > > break; > > case PHY_RUNNING: > > - /* Only register a CHANGE if we are polling or ignoring > > - * interrupts and link changed since latest checking. > > + /* Only register a CHANGE if we are polling and link changed > > + * since latest checking. > > */ > > - if (!phy_interrupt_is_valid(phydev)) { > > + if (phydev->irq == PHY_POLL) { > > old_link = phydev->link; > > err = phy_read_status(phydev); > > if (err) > > @@ -1015,8 +1015,13 @@ void phy_state_machine(struct work_struct *work) > > dev_dbg(&phydev->dev, "PHY state change %s -> %s\n", > > phy_state_to_str(old_state), phy_state_to_str(phydev->state)); > > > > - queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, > > - PHY_STATE_TIME * HZ); > > + /* Only re-schedule a PHY state machine change if we are polling the > > + * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving > > + * between states from phy_mac_interrupt() > > + */ > > + if (phydev->irq == PHY_POLL) > > + queue_delayed_work(system_power_efficient_wq, > > &phydev->state_queue, > > + PHY_STATE_TIME * HZ); > > } > > > > void phy_mac_interrupt(struct phy_device *phydev, int new_link) > > ------------------------------------------------------------------------------- > > > > > > Git bisection log: > > > > ------------------------------------------------------------------------------- > > git bisect start > > # good: [b63f449e18b130fdc372b9717e72c19b83fc4876] Linux 4.4.222 > > git bisect good b63f449e18b130fdc372b9717e72c19b83fc4876 > > # bad: [e157447efd85bb2e6f8deaabbb62663bccd9bad2] Linux 4.4.223 > > git bisect bad e157447efd85bb2e6f8deaabbb62663bccd9bad2 > > # bad: [5733a9f4a3df384097c92c532aed34bc698a9acd] net: dsa: slave: fix > > of-node leak and phy priority > > git bisect bad 5733a9f4a3df384097c92c532aed34bc698a9acd > > # good: [1ce6993b857318a4b8c674b1bbaaf79aced34136] net/mlx5e: Fix blue > > flame quota logic > > git bisect good 1ce6993b857318a4b8c674b1bbaaf79aced34136 > > # good: [c32532162f8ea4beed50a20cf4f9b205c75fe1b1] serial: samsung: Fix > > possible out of bounds access on non-DT platform > > git bisect good c32532162f8ea4beed50a20cf4f9b205c75fe1b1 > > # good: [25e8aad6f491da6ae330148da09585371a3790f2] Revert "ACPI / LPSS: > > allow to use specific PM domain during ->probe()" > > git bisect good 25e8aad6f491da6ae330148da09585371a3790f2 > > # good: [2f3e56e4b6020812350190f1cada230d790ce0e8] powerpc/tm: Fix stack > > pointer corruption in __tm_recheckpoint() > > git bisect good 2f3e56e4b6020812350190f1cada230d790ce0e8 > > # bad: [0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd] net: phy: Avoid polling > > PHY with PHY_IGNORE_INTERRUPTS > > git bisect bad 0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd > > # good: [4ebef63e925e37f5de2f9da8fc86a545e4e0b945] sctp: fix the transports > > round robin issue when init is retransmitted > > git bisect good 4ebef63e925e37f5de2f9da8fc86a545e4e0b945 > > # good: [c175435fdf50c81ca2b6576f090cba31c3489209] NFC: nci: memory leak in > > nci_core_conn_create() > > git bisect good c175435fdf50c81ca2b6576f090cba31c3489209 > > # first bad commit: [0d1951fa23ba0d35a4c5498ff28d1c5206d6fcdd] net: phy: > > Avoid polling PHY with PHY_IGNORE_INTERRUPTS > > ------------------------------------------------------------------------------- > > > -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
