[PATCH RFC v2 7/9] net: phy: set devices_in_package only after validation

[Russell King]

Only set the devices_in_package to a non-zero value if we find a valid
value for this field, so we avoid leaving it set to e.g. 0x1fffffff.

Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
 drivers/net/phy/phy_device.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 79f01cfec774..82a223225901 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -730,13 +730,13 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr,
                           struct phy_c45_device_ids *c45_ids)
 {
        const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
-       u32 *devs = &c45_ids->devices_in_package;
+       u32 devs_in_pkg = 0;
        int i, ret, phy_reg;
 
        /* Find first non-zero Devices In package. Device zero is reserved
         * for 802.3 c45 complied PHYs, so don't probe it at first.
         */
-       for (i = 1; i < MDIO_MMD_NUM && *devs == 0; i++) {
+       for (i = 1; i < MDIO_MMD_NUM && devs_in_pkg == 0; i++) {
                if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) {
                        /* Check that there is a device present at this
                         * address before reading the devices-in-package
@@ -751,28 +751,28 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr,
                        if (!ret)
                                continue;
                }
-               phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
+               phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, &devs_in_pkg);
                if (phy_reg < 0)
                        return -EIO;
        }
 
-       if ((*devs & 0x1fffffff) == 0x1fffffff) {
+       if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) {
                /* If mostly Fs, there is no device there, then let's probe
                 * MMD 0, as some 10G PHYs have zero Devices In package,
                 * e.g. Cortina CS4315/CS4340 PHY.
                 */
-               phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
+               phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, &devs_in_pkg);
                if (phy_reg < 0)
                        return -EIO;
 
                /* no device there, let's get out of here */
-               if ((*devs & 0x1fffffff) == 0x1fffffff)
+               if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff)
                        return -ENODEV;
        }
 
        /* Now probe Device Identifiers for each device present. */
        for (i = 1; i < num_ids; i++) {
-               if (!(c45_ids->devices_in_package & (1 << i)))
+               if (!(devs_in_pkg & (1 << i)))
                        continue;
 
                phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1);
@@ -786,6 +786,8 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr,
                c45_ids->device_ids[i] |= phy_reg;
        }
 
+       c45_ids->devices_in_package = devs_in_pkg;
+
        return 0;
 }
 
-- 
2.20.1