(No MAINTAINERS entry. MODULE_AUTHOR lines exist, but without addresses.)
Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.
Signed-off-by: Jan Engelhardt <[EMAIL PROTECTED]>
Index: linux-2.6.21-rc5/drivers/net/phy/Kconfig
===================================================================
--- linux-2.6.21-rc5.orig/drivers/net/phy/Kconfig
+++ linux-2.6.21-rc5/drivers/net/phy/Kconfig
@@ -2,9 +2,7 @@
# PHY Layer Configuration
#
-menu "PHY device support"
-
-config PHYLIB
+menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
depends on NET_ETHERNET && (BROKEN || !S390)
help
@@ -12,59 +10,52 @@ config PHYLIB
devices. This option provides infrastructure for
managing PHY devices.
+if PHYLIB
+
comment "MII PHY device drivers"
- depends on PHYLIB
config MARVELL_PHY
tristate "Drivers for Marvell PHYs"
- depends on PHYLIB
---help---
Currently has a driver for the 88E1011S
config DAVICOM_PHY
tristate "Drivers for Davicom PHYs"
- depends on PHYLIB
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY
tristate "Drivers for Quality Semiconductor PHYs"
- depends on PHYLIB
---help---
Currently supports the qs6612
config LXT_PHY
tristate "Drivers for the Intel LXT PHYs"
- depends on PHYLIB
---help---
Currently supports the lxt970, lxt971
config CICADA_PHY
tristate "Drivers for the Cicada PHYs"
- depends on PHYLIB
---help---
Currently supports the cis8204
+
config VITESSE_PHY
tristate "Drivers for the Vitesse PHYs"
- depends on PHYLIB
---help---
Currently supports the vsc8244
config SMSC_PHY
tristate "Drivers for SMSC PHYs"
- depends on PHYLIB
---help---
Currently supports the LAN83C185 PHY
config BROADCOM_PHY
tristate "Drivers for Broadcom PHYs"
- depends on PHYLIB
---help---
Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
config FIXED_PHY
tristate "Drivers for PHY emulation on fixed speed/link"
- depends on PHYLIB
---help---
Adds the driver to PHY layer to cover the boards that do not have any
PHY bound,
but with the ability to manipulate the speed/link in software. The
relevant MII
@@ -79,5 +70,4 @@ config FIXED_MII_100_FDX
bool "Emulation for 100M Fdx fixed PHY behavior"
depends on FIXED_PHY
-endmenu
-
+endif # PHYLIB
#<EOF>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
