Hi, all. This patch supports SuperH of smc91x. smc91x installed on the board of SuperH comes to work by applying this patch. Please apply this patch .
regards, Nobuhiro -- Nobuhiro Iwamatsu E-Mail : [EMAIL PROTECTED] GPG ID : 3170EBE9 Signed-off-by: Nobuhiro Iwamatsu <[EMAIL PROTECTED]> --- a/drivers/net/smc91x.h 2007-05-03 18:47:19.000000000 +0900 +++ b/drivers/net/smc91x.h 2007-05-03 18:48:59.000000000 +0900 @@ -232,6 +232,40 @@ #define SMC_insw(a, r, p, l) insw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) +#elif defined(CONFIG_SUPERH) + +#if defined(CONFIG_SH_7780_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) (inw((a) + ((r)&~1)) >> (8*(r%2)))&0xff +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_outb(v, a, r) outw(((inw((a)+((r)&~1))*(0xff<<8*(r%2)))) | ((v)<<(8*(r&2)))), (a) + ((r)&~1)) + +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#else /* BOARDS */ + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 + +#define SMC_inb(a, r) inb((a) + (r)) +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_outb(v, a, r) outb(v, (a) + (r)) +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#endif /* BOARDS */ + +#define set_irq_type(irq, type) do {} while (0) + #elif defined(CONFIG_M32R) #define SMC_CAN_USE_8BIT 0 - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html