Kill all trailing whitespaces in drivers/net/Kconfig.
Signed-off-by: Stefan Schmidt <[EMAIL PROTECTED]>
---
drivers/net/Kconfig | 48 ++++++++++++++++++++++++------------------------
1 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 30fd479..d8675f1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -883,12 +883,12 @@ config SMC911X
help
This is a driver for SMSC's LAN911x series of Ethernet chipsets
including the new LAN9115, LAN9116, LAN9117, and LAN9118.
- Say Y if you want it compiled into the kernel,
+ Say Y if you want it compiled into the kernel,
and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
- This driver is also available as a module. The module will be
- called smc911x. If you want to compile it as a module, say M
+ This driver is also available as a module. The module will be
+ called smc911x. If you want to compile it as a module, say M
here and read <file:Documentation/kbuild/modules.txt>
config NET_VENDOR_RACAL
@@ -1221,7 +1221,7 @@ config IBM_EMAC_RX_SKB_HEADROOM
will always reserve at least 2 bytes to make IP header
aligned, so usually there is no need to add any additional
headroom.
-
+
If unsure, set to 0.
config IBM_EMAC_PHY_RX_CLK_FIX
@@ -1229,10 +1229,10 @@ config IBM_EMAC_PHY_RX_CLK_FIX
depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
help
Enable this if EMAC attached to a PHY which doesn't generate
- RX clock if there is no link, if this is the case, you will
+ RX clock if there is no link, if this is the case, you will
see "TX disable timeout" or "RX disable timeout" in the system
log.
-
+
If unsure, say N.
config IBM_EMAC_DEBUG
@@ -1249,7 +1249,7 @@ config IBM_EMAC_RGMII
bool
depends on IBM_EMAC && 440GX
default y
-
+
config IBM_EMAC_TAH
bool
depends on IBM_EMAC && 440GX
@@ -1482,9 +1482,9 @@ config E100
select MII
---help---
This driver supports Intel(R) PRO/100 family of adapters.
- To verify that your adapter is supported, find the board ID number
- on the adapter. Look for a label that has a barcode and a number
- in the format 123456-001 (six digits hyphen three digits).
+ To verify that your adapter is supported, find the board ID number
+ on the adapter. Look for a label that has a barcode and a number
+ in the format 123456-001 (six digits hyphen three digits).
Use the above information and the Adapter & Driver ID Guide at:
@@ -1496,7 +1496,7 @@ config E100
<http://appsr.intel.com/scripts-df/support_intel.asp>
- More specific information on configuring the driver is in
+ More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
To compile this driver as a module, choose M here and read
@@ -1950,7 +1950,7 @@ config E1000
depends on PCI
---help---
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
- adapters. For more information on how to identify your adapter, go
+ adapters. For more information on how to identify your adapter, go
to the Adapter & Driver ID Guide at:
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
@@ -1960,7 +1960,7 @@ config E1000
<http://support.intel.com>
- More specific information on configuring the driver is in
+ More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
To compile this driver as a module, choose M here and read
@@ -2074,7 +2074,7 @@ config R8169_VLAN
---help---
Say Y here for the r8169 driver to support the functions required
by the kernel 802.1Q code.
-
+
If in doubt, say Y.
config SIS190
@@ -2100,7 +2100,7 @@ config SKGE
and related Gigabit Ethernet adapters. It is a new smaller driver
with better performance and more complete ethtool support.
- It does not support the link failover and network management
+ It does not support the link failover and network management
features that "portable" vendor supplied sk98lin driver does.
This driver supports adapters based on the original Yukon chipset:
@@ -2201,16 +2201,16 @@ config SK98LIN
- SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
- SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
- SMC EZ Card 1000 (SMC9452TXV.2)
-
+
The adapters support Jumbo Frames.
The dual link adapters support link-failover and dual port features.
- Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
- the scatter-gather functionality with sendfile(). Please refer to
+ Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support
+ the scatter-gather functionality with sendfile(). Please refer to
<file:Documentation/networking/sk98lin.txt> for more information about
optional driver parameters.
Questions concerning this driver may be addressed to:
<[EMAIL PROTECTED]>
-
+
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will
@@ -2421,7 +2421,7 @@ config IXGB
<http://support.intel.com>
- More specific information on configuring the driver is in
+ More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
To compile this driver as a module, choose M here and read
@@ -2449,8 +2449,8 @@ config S2IO
tristate "S2IO 10Gbe XFrame NIC"
depends on PCI
---help---
- This driver supports the 10Gbe XFrame NIC of S2IO.
- More specific information on configuring the driver is in
+ This driver supports the 10Gbe XFrame NIC of S2IO.
+ More specific information on configuring the driver is in
<file:Documentation/networking/s2io.txt>.
config S2IO_NAPI
@@ -2824,9 +2824,9 @@ config PPPOE
Support for PPP over Ethernet.
This driver requires the latest version of pppd from the CVS
- repository at cvs.samba.org. Alternatively, see the
+ repository at cvs.samba.org. Alternatively, see the
RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
- which contains instruction on how to use this driver (under
+ which contains instruction on how to use this driver (under
the heading "Kernel mode PPPoE").
config PPPOATM
--
1.5.1.4
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
