Fix the parsing of check of pattern ethernet-phy-ieee802.3 used
by the device tree to initialize the mdio phy.
As per the of_mdio below 2 are valid compatible string
"ethernet-phy-ieee802.3-c22"
"ethernet-phy-ieee802.3-c45"
Cc: Rob Herring <[email protected]>
Signed-off-by: Anand Moon <[email protected]>
---
Documentation/devicetree/bindings/net/ethernet-phy.yaml | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..cfc7909d3e56 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -33,7 +33,7 @@ properties:
description: PHYs that implement IEEE802.3 clause 22
- const: ethernet-phy-ieee802.3-c45
description: PHYs that implement IEEE802.3 clause 45
- - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ - pattern: "^ethernet-phy-ieee[0-9]{3}\\.[0-9][-][a-f0-9]{4}$"
description:
If the PHY reports an incorrect ID (or none at all) then the
compatible list may contain an entry with the correct PHY ID
@@ -44,10 +44,10 @@ properties:
this is the chip vendor OUI bits 19:24, followed by 10
bits of a vendor specific ID.
- items:
- - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ - pattern: "^ethernet-phy-ieee[0-9]{3}\\.[0-9][-][a-f0-9]{4}$"
- const: ethernet-phy-ieee802.3-c22
- items:
- - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+ - pattern: "^ethernet-phy-ieee[0-9]{3}\\.[0-9][-][a-f0-9]{4}$"
- const: ethernet-phy-ieee802.3-c45
reg:
--
2.31.0
