On Fri, Apr 16, 2021 at 03:35:36PM +0200, Thomas Bogendoerfer wrote: > On Fri, Apr 16, 2021 at 12:29:46PM +0300, Sergei Shtylyov wrote: > > On 16.04.2021 11:52, Thomas Bogendoerfer wrote: > > > > > Add device tree bindings for ethernet controller integrated into > > > IDT 79RC3243x SoCs. > > > > > > Signed-off-by: Thomas Bogendoerfer <tsbog...@alpha.franken.de> > > > --- > > > .../bindings/net/idt,3243x-emac.yaml | 74 +++++++++++++++++++ > > > 1 file changed, 74 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/net/idt,3243x-emac.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml > > > b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml > > > new file mode 100644 > > > index 000000000000..3697af5cb66f > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/net/idt,3243x-emac.yaml > > > @@ -0,0 +1,74 @@ > > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/net/idt,3243x-emac.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: IDT 79rc3243x Ethernet controller > > > + > > > +description: Ethernet controller integrated into IDT 79RC3243x family > > > SoCs > > > + > > > +maintainers: > > > + - Thomas Bogendoerfer <tsbog...@alpha.franken.de> > > > + > > > +allOf: > > > + - $ref: ethernet-controller.yaml# > > > + > > > +properties: > > > + compatible: > > > + const: idt,3243x-emac > > > + > > > + reg: > > > + maxItems: 3 > > > + > > > + reg-names: > > > + items: > > > + - const: korina_regs > > > + - const: korina_dma_rx > > > + - const: korina_dma_tx > > > + > > > + interrupts: > > > + items: > > > + - description: RX interrupt > > > + - description: TX interrupt > > > + > > > + interrupt-names: > > > + items: > > > + - const: korina_rx > > > + - const: korina_tx > > > + > > > + clocks: > > > + maxItems: 1 > > > + > > > + clock-names: > > > + items: > > > + - const: mdioclk > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - reg-names > > > + - interrupts > > > + - interrupt-names > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + > > > + ethernet@60000 { > > > + compatible = "idt,3243x-emac"; > > > + > > > + reg = <0x60000 0x10000>, > > > + <0x40000 0x14>, > > > + <0x40014 0x14>; > > > + reg-names = "korina_regs", > > > + "korina_dma_rx", > > > + "korina_dma_tx"; > > > + > > > + interrupts-extended = <&rcpic3 0>, <&rcpic3 1>; > > > > You use this prop, yet don't describe it? > > that's just interrupt-parent and interrupts in one statement. And since > make dt_binding_check didn't complained I thought that's good this way. > Rob, do I need to describe interrupts-extended as well ?
No, the tooling handles both cases. What the parent is is outside the scope of a binding. > I could change that to interrupt-parent/interrupts as the driver no > longer uses dma under/overrun interrupts, which have a different > interrupt-parent. Humm, you should be describing the interrupt connections the h/w block has, not what the driver uses (today) or not. Rob