On Sunday 01 July 2007 17:00:06 Lennert Buytenhek wrote: > A multimeter should do the trick, but I would advise against this > if you're not totally comfortable with hacking hardware.
Ok, the resistor on the board is 100ohm, which is too big according to the docs of the extender. So what I tried is to connect a 10ohm resistor between IDSEL and the AD pin, on the extender itself. But it didn't do the trick. It still doesn't work. I also connected a 10ohm resistor between IDSEL and the AD pin directly on the mainboard. Also doesn't work. So I guess it's some other issue. But I have no idea what could be wrong besides that. -- Greetings Michael. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
