On Tue, 10 Jul 2007, Stephen Hemminger wrote:
On Tue, 10 Jul 2007 12:44:35 -0400
Jeff Garzik <[EMAIL PROTECTED]> wrote:
Adrian Bunk wrote:
This patch contains the scheduled removal of the sk98lin driver.
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Stephen -- ACK?
Yes. Existing driver is dead, if there are any ancient boards that don't
work with skge, I haven't heard any complaints in at least a year.
As a fallback users, can always go with vendor driver.
I have a several SK-9872s that do not work reliably with skge but work
fine with sklin. The SK-9872 is a dual port card. Doing the following
causes a hard lock:
modprobe bonding miimon=100 mode=active-backup
modprobe skge
ifup bond0
ifdown bond0
This happens with every version of skge I've tested, including whatever is
in 2.6.22. /etc/network/interfaces contains:
iface bond0 inet static
network 192.168.1.0
address 192.168.1.1
broadcast 192.168.1.255
netmask 255.255.255.0
up ifenslave bond0 eth0 eth1
down ifenslave -d bond0 eth0 eth1
lspci -vv -s 02:01
02:01.0 Ethernet controller: SysKonnect SK-9872 Gigabit Ethernet Server Adapter
(SK-NET GE-ZX dual link) (rev 11)
Subsystem: SysKonnect SK-9844 Gigabit Ethernet Server Adapter (SK-NET
GE-SX dual link)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: <access denied>
-Chris
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
