Hi,

this implements support for USB autosuspend in the asix USB ethernet
driver.

        Regards
                Oliver
Signed-off-by: Oliver Neukum <[EMAIL PROTECTED]>
---

--- a/drivers/net/usb/asix.c    2007-08-03 13:16:31.000000000 +0200
+++ b/drivers/net/usb/asix.c    2007-08-03 13:17:05.000000000 +0200
@@ -1474,6 +1474,7 @@ static struct usb_driver asix_driver = {
        .suspend =      usbnet_suspend,
        .resume =       usbnet_resume,
        .disconnect =   usbnet_disconnect,
+       .supports_autosuspend = 1,
 };
 
 static int __init asix_init(void)
--- a/drivers/net/usb/usbnet.c  2007-08-03 13:16:53.000000000 +0200
+++ b/drivers/net/usb/usbnet.c  2007-08-03 13:19:31.000000000 +0200
@@ -588,6 +588,7 @@ static int usbnet_stop (struct net_devic
        dev->flags = 0;
        del_timer_sync (&dev->delay);
        tasklet_kill (&dev->bh);
+       usb_autopm_put_interface(dev->intf);
 
        return 0;
 }
@@ -601,9 +602,19 @@ static int usbnet_stop (struct net_devic
 static int usbnet_open (struct net_device *net)
 {
        struct usbnet           *dev = netdev_priv(net);
-       int                     retval = 0;
+       int                     retval;
        struct driver_info      *info = dev->driver_info;
 
+       if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
+               if (netif_msg_ifup (dev))
+                       devinfo (dev,
+                               "resumption fail (%d) usbnet usb-%s-%s, %s",
+                               retval,
+                               dev->udev->bus->bus_name, dev->udev->devpath,
+                       info->description);
+               goto done_nopm;
+       }
+
        // put into "known safe" state
        if (info->reset && (retval = info->reset (dev)) < 0) {
                if (netif_msg_ifup (dev))
@@ -657,7 +668,10 @@ static int usbnet_open (struct net_devic
 
        // delay posting reads until we're fully open
        tasklet_schedule (&dev->bh);
+       return retval;
 done:
+       usb_autopm_put_interface(dev->intf);
+done_nopm:
        return retval;
 }
 
@@ -1141,6 +1155,7 @@ usbnet_probe (struct usb_interface *udev
 
        dev = netdev_priv(net);
        dev->udev = xdev;
+       dev->intf = udev;
        dev->driver_info = info;
        dev->driver_name = name;
        dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
@@ -1265,12 +1280,18 @@ int usbnet_suspend (struct usb_interface
        struct usbnet           *dev = usb_get_intfdata(intf);
 
        if (!dev->suspend_count++) {
-               /* accelerate emptying of the rx and queues, to avoid
+               /*
+                * accelerate emptying of the rx and queues, to avoid
                 * having everything error out.
                 */
                netif_device_detach (dev->net);
                (void) unlink_urbs (dev, &dev->rxq);
                (void) unlink_urbs (dev, &dev->txq);
+               /*
+                * reattach so runtime management can use and
+                * wake the device
+                */
+               netif_device_attach (dev->net);
        }
        return 0;
 }
@@ -1280,10 +1301,9 @@ int usbnet_resume (struct usb_interface 
 {
        struct usbnet           *dev = usb_get_intfdata(intf);
 
-       if (!--dev->suspend_count) {
-               netif_device_attach (dev->net);
+       if (!--dev->suspend_count)
                tasklet_schedule (&dev->bh);
-       }
+
        return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_resume);
--- a/drivers/net/usb/usbnet.h  2007-08-03 13:16:44.000000000 +0200
+++ b/drivers/net/usb/usbnet.h  2007-08-03 13:17:05.000000000 +0200
@@ -28,6 +28,7 @@
 struct usbnet {
        /* housekeeping */
        struct usb_device       *udev;
+       struct usb_interface    *intf;
        struct driver_info      *driver_info;
        const char              *driver_name;
        wait_queue_head_t       *wait;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to