This patch fixes two problems during driver unload. The pci_disable_device()
call is before firmware reload, causing reads and writes across PCI bus after
disabling device. Second problem is the register window was wrong during
firmware reload
Signed-off by: Dhananjay Phadke <[EMAIL PROTECTED]>
Index: netdev-2.6/drivers/net/netxen/netxen_nic_main.c
===================================================================
--- netdev-2.6.orig/drivers/net/netxen/netxen_nic_main.c
+++ netdev-2.6/drivers/net/netxen/netxen_nic_main.c
@@ -746,9 +746,6 @@ static void __devexit netxen_nic_remove(
netxen_nic_disable_int(adapter);
- if (adapter->irq)
- free_irq(adapter->irq, adapter);
-
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
init_firmware_done++;
netxen_free_hw_resources(adapter);
@@ -772,13 +769,8 @@ static void __devexit netxen_nic_remove(
}
}
- if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
- pci_disable_msi(pdev);
-
vfree(adapter->cmd_buf_arr);
- pci_disable_device(pdev);
-
if (adapter->portnum == 0) {
if (init_firmware_done) {
i = 100;
@@ -829,12 +821,19 @@ static void __devexit netxen_nic_remove(
}
}
+ if (adapter->irq)
+ free_irq(adapter->irq, adapter);
+
+ if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
+ pci_disable_msi(pdev);
+
iounmap(adapter->ahw.db_base);
iounmap(adapter->ahw.pci_base0);
iounmap(adapter->ahw.pci_base1);
iounmap(adapter->ahw.pci_base2);
pci_release_regions(pdev);
+ pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_netdev(netdev);
Index: netdev-2.6/drivers/net/netxen/netxen_nic_hw.c
===================================================================
--- netdev-2.6.orig/drivers/net/netxen/netxen_nic_hw.c
+++ netdev-2.6/drivers/net/netxen/netxen_nic_hw.c
@@ -904,11 +904,11 @@ netxen_nic_pci_set_window(struct netxen_
ddr_mn_window = window;
writel(window, PCI_OFFSET_SECOND_RANGE(adapter,
NETXEN_PCIX_PH_REG
-
(PCIX_MN_WINDOW)));
+
(PCIX_MN_WINDOW(adapter->ahw.pci_func))));
/* MUST make sure window is set before we forge on... */
readl(PCI_OFFSET_SECOND_RANGE(adapter,
NETXEN_PCIX_PH_REG
- (PCIX_MN_WINDOW)));
+
(PCIX_MN_WINDOW(adapter->ahw.pci_func))));
}
addr -= (window * NETXEN_WINDOW_ONE);
addr += NETXEN_PCI_DDR_NET;
@@ -929,11 +929,11 @@ netxen_nic_pci_set_window(struct netxen_
writel((window << 22),
PCI_OFFSET_SECOND_RANGE(adapter,
NETXEN_PCIX_PH_REG
- (PCIX_SN_WINDOW)));
+
(PCIX_SN_WINDOW(adapter->ahw.pci_func))));
/* MUST make sure window is set before we forge on... */
readl(PCI_OFFSET_SECOND_RANGE(adapter,
NETXEN_PCIX_PH_REG
- (PCIX_SN_WINDOW)));
+
(PCIX_SN_WINDOW(adapter->ahw.pci_func))));
}
addr -= (window * 0x400000);
addr += NETXEN_PCI_QDR_NET;
Index: netdev-2.6/drivers/net/netxen/netxen_nic_hdr.h
===================================================================
--- netdev-2.6.orig/drivers/net/netxen/netxen_nic_hdr.h
+++ netdev-2.6/drivers/net/netxen/netxen_nic_hdr.h
@@ -649,9 +649,11 @@ enum {
#define PCIX_INT_VECTOR (0x10100)
#define PCIX_INT_MASK (0x10104)
-#define PCIX_MN_WINDOW (0x10200)
+#define PCIX_MN_WINDOW_F0 (0x10200)
+#define PCIX_MN_WINDOW(_f) (PCIX_MN_WINDOW_F0 + (0x20 * (_f)))
#define PCIX_MS_WINDOW (0x10204)
-#define PCIX_SN_WINDOW (0x10208)
+#define PCIX_SN_WINDOW_F0 (0x10208)
+#define PCIX_SN_WINDOW(_f) (PCIX_SN_WINDOW_F0 + (0x20 * (_f)))
#define PCIX_CRB_WINDOW (0x10210)
#define PCIX_CRB_WINDOW_F0 (0x10210)
#define PCIX_CRB_WINDOW_F1 (0x10230)
--
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
